Thermal conductivity probe

Low-mass probe accurately measures the thermal conductivity of polyurethane foam /and other thermal insulating materials/ while exposed to either hydrogen of helium permeation in temperature ranges from ambient to cryogenic. The thermal conductivity of a specimen is determined from an experimentally determined increase in temperature

Analysis of a space emergency ammonia dump using the FLOW-NET two-phase flow program

Venting of cryogenic and non-cryogenic fluids to a vacuum or a very low pressure will take place in many space-based systems that are currently being designed. This may cause liquid freezing either internally within the flow circuit or on external spacecraft surfaces. Typical ammonia flow circuits were investigated to determine the effect of the geometric configuration and initial temperature, pressure, and void fraction on the freezing characteristics of the system. The analysis was conducted also to investigate the ranges of applicability of the FLOW-NET program. It was shown that a typical system can be vented to very low liquid fractions before freezing occurs. However, very small restrictions in the flow circuit can hasten the inception of freezing. The FLOW-NET program provided solutions over broad ranges of system conditions, such as venting of an ammonia tank, initially completely filled with liquid, through a series of contracting and expanding line cross sections to near-vacuum conditions

Continuous quantum measurement of a Bose-Einstein condensate: a stochastic Gross-Pitaevskii equation

We analyze the dynamics of a Bose-Einstein condensate undergoing a continuous dispersive imaging by using a Lindblad operator formalism. Continuous strong measurements drive the condensate out of the coherent state description assumed within the Gross-Pitaevskii mean-field approach. Continuous weak measurements allow instead to replace, for timescales short enough, the exact problem with its mean-field approximation through a stochastic analogue of the Gross-Pitaevskii equation. The latter is used to show the unwinding of a dark soliton undergoing a continuous imaging.Comment: 13 pages, 10 figure

Optimization of the Parameters of Solar Water Heating System

In order to investigate the possibility to increase the efficiency of a flat-plate solar collector the mathematical model of the collector has been worked out. By solving the Laplace heat transfer equation at the boundary conditions accordingly to the construction of the collector, the obtained solution gives possibility to simulate on a computer the construction of the collector in dependence on physical, thermal and economic values of materials used for the construction. The computed results by theoretical formulas with experimental results obtained on special laboratory equipment have been compared and good concurrence acquired

Investigation of novel design piezoelectric bending actuators

Two piezoelectric bending actuators of a novel design are presented and analysed in the paper. Numerical modelling and experimental study of the piezoelectric bending actuators were performed to verify operating principle and to investigate dynamic characteristics of the actuators. Numerical calculations are performed by using finite element method. Results of experimental study of piezoelectric actuators are compared with the results of finite element simulations. Results of the numerical and experimental research are analysed and discussed

Efficient preparation and detection of microwave dressed-state qubits and qutrits with trapped ions

We demonstrate a method for preparing and detecting all eigenstates of a three-level microwave dressed system with a single trapped ion. The method significantly reduces the experimental complexity of gate operations with dressed-state qubits, as well as allowing all three of the dressed states to be prepared and detected, thereby providing access to a qutrit that is well protected from magnetic field noise. In addition, we demonstrate individual addressing of the clock transitions in two ions using a strong static magnetic field gradient, showing that our method can be used to prepare and detect microwave dressed states in a string of ions when performing multi-ion quantum operations with microwave and radio frequency fields. The individual addressability of clock transitions could also allow for the control of pairwise interaction strengths between arbitrary ions in a string using lasers

Robust and Deterministic Preparation of Bosonic Logical States in a Trapped Ion

Encoding logical qubits in bosonic modes provides a potentially hardware-efficient implementation of fault-tolerant quantum information processing. Recent advancements in trapped ions and superconducting microwave cavities have led to experimental realizations of high-quality bosonic states and demonstrations of error-corrected logical qubits encoded in bosonic modes. However, current protocols for preparing bosonic code words lack robustness to common noise sources and can be experimentally challenging to implement, limiting the quality and breadth of codes that have been realized to date. Here, we combine concepts of error suppression via robust control with quantum error correction encoding and experimentally demonstrate high-fidelity, deterministic preparation of highly non-classical target bosonic states in the mechanical motion of a trapped ion. Our approach implements numerically optimized dynamical modulation of laser-driven spin-motion interactions to generate the target state in a single step. The optimized control pulses are tailored towards experimental constraints and are designed to be robust against the dominant source of error. Using these protocols, we demonstrate logical fidelities for the Gottesman-Kitaev-Preskill (GKP) state as high as $\bar{\mathcal{F}}=0.940(8)$, achieve the first realization of a distance-3 binomial logical state with an average fidelity of $\mathcal{F}=0.807(7)$, and demonstrate a 12.91(5) dB squeezed vacuum state.Comment: 12 pages, 8 figure

The transition from Agricultural to Biosystems Engineering University Studies in Europe

This paper describes the main result produced by the ERABEE (Education & Research in Biosystems Engineering in Europe) Thematic Network. The ERABEE Thematic Network was a follow-up of a previous Thematic Network called USAEE (University Studies of Agricultural Engineering in Europe) and both were co-financed by the European Community in the framework of the LLP Programme (Lifelong Learning Programme). The innovative and novel goal of the ERABEE Network was to promote the critical and inevitable transition from the traditional discipline of Agricultural Engineering to the emerging discipline of Biosystems Engineering, exploiting along this direction the outcomes accomplished by the the earlier USAEE Thematic Network. It also aimed at enhancing the compatibility among the new programmes of Biosystems Engineering, supporting their recognition and accreditation at European and International level and facilitating greater mobility of skilled personnel, researchers and students

Electron paramagnetic resonance study of ferroelectric phase transition and dynamic effects in a Mn²⁺ doped [NH₄][Zn(HCOO)₃] hybrid formate framework

We present an X- and Q-band continuous wave (CW) and pulse electron paramagnetic resonance (EPR) study of a manganese doped [NH4][Zn(HCOO)3] hybrid framework, which exhibits a ferroelectric structural phase transition at 190 K. The CW EPR spectra obtained at different temperatures exhibit clear changes at the phase transition temperature. This suggests a successful substitution of the Zn2+ ions by the paramagnetic Mn2+ centers, which is further confirmed by the pulse EPR and 1H ENDOR experiments. Spectral simulations of the CW EPR spectra are used to obtain the temperature dependence of the Mn2+ zero-field splitting, which indicates a gradual deformation of the MnO6 octahedra indicating a continuous character of the transition. The determined data allow us to extract the critical exponent of the order parameter (β = 0.12), which suggests a quasi two-dimensional ordering in [NH4][Zn(HCOO)3]. The experimental EPR results are supported by the density functional theory calculations of the zero-field splitting parameters. Relaxation time measurements of the Mn2+ centers indicate that the longitudinal relaxation is mainly driven by the optical phonons, which correspond to the vibrations of the metal–oxygen octahedra. The temperature behavior of the transverse relaxation indicates a dynamic process in the ordered ferroelectric phase

In silico evaluation of ultrafiltration and nanofiltration membrane cascades for continuous fractionation of protein hydrolysate from tuna processing byproduct

The present work proposes the design of cascades that integrate ultrafiltration (UF) and nanofiltration (NF) membranes to separate the different protein fractions from the protein hydrolysate obtained after hydrolysis of tuna byproducts. Experimental data (permeate flux and rejection of protein fractions under different applied pressures) previously obtained and published by this research group were fitted to empirical models, which were the basis for a process simulation model. High recovery rates (0.9) in the UF stages implied high process yields by reduced desired fraction losses, while similar recovery rates in the NF stages were required for high product purity. However, the applied pressures were not so influential over the performance of the system. Optimization problems were solved to identify the optimal design and operation conditions to maximize the product purity or the process yield. Maximal purity of the preferred 1-4 kDa fraction (49.3% from 19.0% in feed stream) obtained by the configuration with 3 UF stages and another 3 NF stages implied 2 and 5 bar pressures applied in the UF and NF stages, respectively, while 0.9 was the optimal recovery rate value for all the stages. These maximal purity conditions resulted in 62.6% process yield, defined as the percentage of the 1-4 kDa fraction in the feed stream recovered in the product stream. In addition, multiobjective optimization of the process was also carried out to obtain the Pareto graphs that represent the counterbalance between maximal yields and purities