Towards developing robust algorithms for solving partial differential equations on MIMD machines

Methods for efficient computation of numerical algorithms on a wide variety of MIMD machines are proposed. These techniques reorganize the data dependency patterns to improve the processor utilization. The model problem finds the time-accurate solution to a parabolic partial differential equation discretized in space and implicitly marched forward in time. The algorithms are extensions of Jacobi and SOR. The extensions consist of iterating over a window of several timesteps, allowing efficient overlap of computation with communication. The methods increase the degree to which work can be performed while data are communicated between processors. The effect of the window size and of domain partitioning on the system performance is examined both by implementing the algorithm on a simulated multiprocessor system

Failure analysis of a graphite/epoxy laminate subjected to bolt bearing loads

Quasi-isotropic graphite/epoxy laminates (T300/5208) were tested under bolt bearing loads to study failure modes, strengths, and failure energy. Specimens had a range of configurations to produce failures by the three nominal failure modes: tension, shearout, and bearing. Radiographs were made after damage onset and after ultimate load to examine the failure modes. Also, the laminate stresses near the bolt hole calculated for each test specimen configuration, and then used with a failure criterion to analyze the test data. Failures involving extensive bearing damage were found to dissipate significantly more energy than tension dominated failures. The specimen configuration influenced the failure modes and therefore also influenced the failure energy. In the width-to-diameter ratio range of 4 to 5, which is typical of structural joints, a transition from the tension mode to the bearing mode was shown to cause a large increase in failure energy. The failure modes associated with ultimate strength were usually different from those associated with the damage onset. Typical damage sequences involved bearing damage onset at the hole boundary followed by tension damage progressing from the hole boundary

Second order hydrodynamics based on effective kinetic theory and electromagnetic signals from QGP

We study thermal particle production from relativistic heavy ion collisions in presence of viscosities by employing the recently developed second order dissipative hydrodynamic formulation estimated within a quasiparticle description of thermal QCD (Quantum Chromo-Dynamics) medium. The sensitivity of shear and bulk viscous pressures to the temperature dependence of relaxation time is analyzed within one dimensional boost invariant expansion of quark gluon plasma (QGP). The dissipative corrections to the phase-space distribution functions are obtained from the Chapman-Enskog like iterative solution of effective Boltzmann equation in the relaxation time approximation. Thermal dilepton and photon production rates for QGP are calculated by employing this viscous modified distribution function. Particle emission yields are quantified for the longitudinal expansion of QGP with different temperature dependent relaxation times. Our analysis employing this second order hydrodynamic model indicates that the particle spectra gets enhanced by both bulk and shear viscosities and is well behaved. Also, the particle yields are found to be sensitive to relaxation time.Comment: 12 pages, 9 figure

Data Privacy and Technological Ethics in Rural Area

In today's world of rapid increasing of technology, Data privacy and Ethics has become a major concern. The complexity of data and ethics poses incredible issues by collecting user personal information in digital world. the Digital service company usually bear responsibility of protecting users' personal data from unauthorized access however issue arise when service provider and platforms do not protect user collective data, and this led to data misuse and exposing sensible data of the person. To handling once data responsibly and ethically is important for safeguarding people's rights and preserving public trust. This study examines the ethical challenges in emerging technologies, including data privacy and ethics. The paper aims to provide awareness of data privacy and ethics in technology

Measuring nanomechanical motion with an imprecision far below the standard quantum limit

We demonstrate a transducer of nanomechanical motion based on cavity enhanced optical near-fields capable of achieving a shot-noise limited imprecision more than 10 dB below the standard quantum limit (SQL). Residual background due to fundamental thermodynamical frequency fluctuations allows a total imprecision 3 dB below the SQL at room temperature (corresponding to 600 am/Hz^(1/2) in absolute units) and is known to reduce to negligible values for moderate cryogenic temperatures. The transducer operates deeply in the quantum backaction dominated regime, prerequisite for exploring quantum backaction, measurement-induced squeezing and accessing sub-SQL sensitivity using backaction evading techniques

Modeling of EDM electrodes for development of LPOT turbine rotor and optimization of parameters for attenuate portioned electrode by Taguchi based Grey Relational Analysis

Launch vehicle requires high thrust during lift off. Semi-cryogenic engine using liquid oxygen (LOX) as the oxidiser and kerosene (earth storable) as the fuel, produces thrust around 2000kN. LOX is pumped by Low Pressure Oxidiser Turbo pump (LPOT) to level required for cavitation free operation of the Main Oxidiser Pump (MOP). Inconel 718, the material for LPOT turbine rotor has High strength thermal resistance (HSTS), ignition resistance and property of work hardening, which refers to strengthening of metal by plastic deformation (after the machining pass). The conventional machining processes cannot be adopted to produce complex shapes with high surface finish and accuracy. The non conventional machining technique like EDM is preferred. Due to the closed tip nature of the rotor die sinking EDM is preferred over wire EDM. The LPOT turbine has two rows of rotor blades; 100 symmetric blades and 105 asymmetric blades. The modeling of the EDM electrodes is done in CAD and the trial manufacturing of the electrodes for developing symmetric blade of turbine rotor is carried out. One of the electrode is having a section with 0.4mm thickness. The EDM parameters are optimized for attenuate/thin portioned electrode using Taguchi based Grey Relation Analysis. The most significant parameter using ANOVA is found out. Confirmation test are also performed with optimum parameter combination and an improvement of machining parameter is obtained

On the origin of the various types of radio emission in GRS 1915+105

We investigate the association between the radio ``plateau'' states and the large superluminal flares in GRS 1915+105 and propose a qualitative scenario to explain this association. We identify several candidate superluminal flare events from available monitoring data on this source and analyze the contemporaneous RXTE pointed observations. We detect a strong correlation between the average X-ray flux during the ``plateau'' state and the total energy emitted in radio during the subsequent radio flare. We find that the sequence of events is similar for all large radio flares with a fast rise and exponential decay morphology. Based on these results, we propose a qualitative scenario in which the separating ejecta during the superluminal flares are observed due to the interaction of the matter blob ejected during the X-ray soft dips, with the steady jet already established during the ``plateau'' state. This picture can explain all types of radio emission observed from this source in terms of its X-ray emission characteristics.Comment: Corrected typo in the author names, contents unchanged, accepted in Ap

Hospital costs of out-of-hospital cardiac arrest patients treated in intensive care; a single centre evaluation using the national tariff-based system

OBJECTIVES: There is a scarcity of literature reporting hospital costs for treating out of hospital cardiac arrest (OOHCA) survivors, especially within the UK. This is essential for assessment of cost-effectiveness of interventions necessary to allow just allocation of resources within the National Health Service. We set out primarily to calculate costs stratified against hospital survival and neurological outcomes. Secondarily, we estimated cost effectiveness based on estimates of survival and utility from previous studies to calculate costs per quality adjusted life year (QALY). SETTING: We performed a single centre (London) retrospective review of in-hospital costs of patients admitted to the intensive care unit (ICU) following return of spontaneous circulation (ROSC) after OOHCA over 18 months from January 2011 (following widespread introduction of targeted temperature management and primary percutaneous intervention). PARTICIPANTS: Of 69 successive patients admitted over an 18-month period, survival and cerebral performance category (CPC) outcomes were obtained from review of databases and clinical notes. The Trust finance department supplied ICU and hospital costs using the Payment by Results UK system. RESULTS: Of those patients with ROSC admitted to ICU, survival to hospital discharge (any CPC) was 33/69 (48%) with 26/33 survivors in CPC 1–2 at hospital discharge. Cost per survivor to hospital discharge (including total cost of survivors and non-survivors) was £50 000, cost per CPC 1–2 survivor was £65 000. Cost and length of stay of CPC 1–2 patients was considerably lower than CPC 3–4 patients. The majority of the costs (69%) related to intensive care. Estimated cost per CPC 1–2 survivor per QALY was £16 000. CONCLUSIONS: The costs of in-hospital patient care for ICU admissions following ROSC after OOHCA are considerable but within a reasonable threshold when assessed from a QALY perspective