Single-molecule electrical contacts on silicon electrodes under ambient conditions

The ultimate goal in molecular electronics is to use individual molecules as the active electronic component of a real-world sturdy device. For this concept to become reality, it will require the field of single-molecule electronics to shift towards the semiconducting platform of the current microelectronics industry. Here, we report silicon-based single-molecule contacts that are mechanically and electrically stable under ambient conditions. The single-molecule contacts are prepared on silicon electrodes using the scanning tunnelling microscopy break-junction approach using a top metallic probe. The molecular wires show remarkable current–voltage reproducibility, as compared to an open silicon/nano-gap/metal junction, with current rectification ratios exceeding 4,000 when a low-doped silicon is used. The extension of the single-molecule junction approach to a silicon substrate contributes to the next level of miniaturization of electronic components and it is anticipated it will pave the way to a new class of robust single-molecule circuits

Ultra-small fatty acid-stabilized magnetite nanocolloids synthesized by in situ hydrolytic precipitation

© 2015 Kheireddine El-Boubbou et al. Simple, fast, large-scale, and cost-effective preparation of uniform controlled magnetic nanoparticles remains a major hurdle on the way towards magnetically targeted applications at realistic technical conditions. Herein, we present a unique one-pot approach that relies on simple basic hydrolytic in situ coprecipitation of inexpensive metal salts (Fe<sup>2+</sup> and Fe<sup>3+</sup>) compartmentalized by stabilizing fatty acids and aided by the presence of alkylamines. The synthesis was performed at relatively low temperatures (80°C) without the use of high-boiling point solvents and elevated temperatures. This method allowed for the production of ultra-small, colloidal, and hydrophobically stabilized magnetite metal oxide nanoparticles readily dispersed in organic solvents. The results reveal that the obtained magnetite nanoparticles exhibit narrow size distributions, good monodispersities, high saturation magnetizations, and excellent colloidal stabilities. When the [fatty acid]: [Fe] ratio was varied, control over nanoparticle diameters within the range of 2-10 nm was achieved. The amount of fatty acid and alkylamine used during the reaction proved critical in governing morphology, dispersity, uniformity, and colloidal stability. Upon exchange with water-soluble polymers, the ultra-small sized particles become biologically relevant, with great promise for theranostic applications as imaging and magnetically targeted delivery vehicles

Reduced graphene oxide-silicon interface involving direct Si-O bonding as a conductive and mechanical stable ohmic contact

Metal-semiconductor junctions are essential contacts for semiconductor devices, but high contact junction resistance is a limiting operational factor. Here, we establish an ohmic contact of low resistance of <4 × 10−6Ω cm2between platinum and n-type Si (111)-H surfaces. This involved Si-O covalent bonding a monolayer of graphene oxide (GO) to the Si surface followed by electrochemical reduction to form reduced graphene oxide (rGO). Current-voltage plots demonstrate that the GO/rGO transformation is associated with a change from a rectifying to an ohmic contact. The process is a viable method for constructing semiconductor-rGO interfaces and demonstrates that GO/rGO monolayers can be used as active components in tuning the contact resistance of metal-semiconductor junctions

SGR: an online genomic resource for the woodland strawberry

Fragaria vesca, a diploid strawberry species commonly known as the alpine or woodland strawberry, is a versatile experimental plant system and an emerging model for the Rosaceae family. An ancestral F. vesca genome contributed to the genome of the octoploid dessert strawberry (F. ×ananassa), and the extant genome exhibits synteny with other commercially important members of the Rosaceae family such as apple and peach. To provide a molecular description of floral organ and fruit development at the resolution of specific tissues and cell types, RNAs from flowers and early developmental stage fruit tissues of the inbred F. vesca line YW5AF7 were extracted and the resulting cDNA libraries sequenced using an Illumina HiSeq2000. To enable easy access as well as mining of this two-dimensional (stage and tissue) transcriptome dataset, a web-based database, the Strawberry Genomic Resource (SGR), was developed. SGR is a web accessible database that contains sample description, sample statistics, gene annotation, and gene expression analysis. This information can be accessed publicly from a web-based interface at http://bioinformatics.towson.edu/strawberry/Default.aspx . The SGR website provides user friendly search and browse capabilities for all the data stored in the database. Users are able to search for genes using a gene ID or description or obtain differentially expressed genes by entering different comparison parameters. Search results can be downloaded in a tabular format compatible with Microsoft excel application. Aligned reads to individual genes and exon/intron structures are displayed using the genome browser, facilitating gene re-annotation by individual users. The SGR database was developed to facilitate dissemination and data mining of extensive floral and fruit transcriptome data in the woodland strawberry. It enables users to mine the data in different ways to study different pathways or biological processes during reproductive development.https://doi.org/10.1186/1471-2229-13-22

The rapid formation of functional monolayers on silicon under mild conditions

We report on an exceedingly mild chemical functionalization of hydrogen-terminated Si(100) with unactivated and unprotected bifunctional α,ω-dialkynes. Monolayer formation occurs rapidly in the dark, and at room temperature, from dilute solutions of an aromatic-conjugated acetylene. The method addresses the poor reactivity of p-type substrates under mild conditions. We suggest the importance of several factors, including an optimal orientation for electron transfer between the adsorbate and the Si surface, conjugation of the acetylenic function with a π-system, as well as the choice of a solvent system that favors electron transfer and screens Coulombic interactions between surface holes and electrons. The passivated Si(100) electrode is amenable to further functionalization and shown to be a viable model system for redox studies at non-oxide semiconductor electrodes in aqueous solutions

Distance-dependent electron transfer at passivated electrodes decorated by gold nanoparticles

The phenomenon of nanoparticles attached to an electrode passivated by an organic layer allowing efficient electron transfer between redox species in solution and the underlying electrode to be restored has resulted in Chazalviel and Allongue proposing a theory [Chazalviel, J.-N.; Allongue, P. J. Am. Chem. Soc.2011, 133, 762-764] to explain this phenomenon. The theory suggests that with electrode-organic layer-nanoparticle constructs, high exchange current densities, compared with when the nanoparticles are absent, results in the rate of electron transfer being independent of the thickness of the organic layer until a threshold thickness is exceeded. Thereafter, the thicker the organic layer, the slower the rate of electron transfer. Herein we provide the first experimental data to support this theory using a single experimental system that can show the transition from thickness independent electron transfer kinetics to distant dependent kinetics. This was achieved using ethylenediamine electrodeposited on a glassy carbon electrode. Different numbers of deposition cycles were applied in order to fabricate different thicknesses of the organic film. The deposited films showed progressively greater blocking abilities toward ruthenium hexamine, as a redox active probe in solution, as the films got thicker. Electron transfer kinetics of nanoparticle-decorated surfaces showed a change from thickness independent to thickness dependent as the organic layer exceeded an average thickness of 20 Å. Electrochemical impedance spectroscopy, cyclic voltammetry, scanning electron microscopy, ellipsometry, and atomic force microscopy were used to characterize the fabricated surfaces

The rapid formation of functional monolayers on silicon under mild conditions

We report on an exceedingly mild chemical functionalization of hydrogen-terminated Si(100) with unactivated and unprotected bifunctional α,ω-dialkynes. Monolayer formation occurs rapidly in the dark, and at room temperature, from dilute solutions of an aromatic-conjugated acetylene. The method addresses the poor reactivity of p-type substrates under mild conditions. We suggest the importance of several factors, including an optimal orientation for electron transfer between the adsorbate and the Si surface, conjugation of the acetylenic function with a π-system, as well as the choice of a solvent system that favors electron transfer and screens Coulombic interactions between surface holes and electrons. The passivated Si(100) electrode is amenable to further functionalization and shown to be a viable model system for redox studies at non-oxide semiconductor electrodes in aqueous solutions

Investigation of the antifouling properties of phenyl phosphorylcholine-based modified gold surfaces

Low impedance, antifouling coatings on gold electrodes based on three new zwitterionic phenyl phosphorylcholine (PPC)-based layers namely 1) reductively adsorbed PPC diazonium salt, 2) dithiocarbamate PPC SAM and 3) lipoamide PPC SAM (PPC coupled to α-lipoic acid) were evaluated. The layers were assessed for their ability to limit nonspecific adsorption of proteins to electrode surface with some significant differences observed compared with previously studied PPC diazonium salts reductively adsorbed on glassy carbon. Fluorescence microscopy and electrochemical impedance spectroscopy results suggest that protein adsorption is sensitive to the difference in the structure of the PPC molecules and the charge neutrality of the layers. The lipoamide PPC SAM was shown to be the most effective at resisting nonspecific protein adsorption and this layer was as effective as the \u27gold standard\u27 of oligo(ethylene oxide) SAMs on gold and PPC diazonium salts reductively adsorbed on glassy carbon. 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Control over Near-Ballistic Electron Transport through Formation of Parallel Pathways in a Single-Molecule Wire

This paper reports highly efficient coherent tunneling in single-molecule wires of oligo-ferrocenes with one to three Fc units. The Fc units were directly coupled to the electrodes, i.e., without chemical anchoring groups between the Fc units and the terminal electrodes. We found that a single Fc unit readily interacts with the metal electrodes of an STM break junction (STM = scanning tunneling microscope) and that the zero-voltage bias conductance of an individual Fc molecular junction increased 5-fold, up to 80% of the conductance quantum G0 (77.4 µS), when the length of the molecular wire was increased from one to three connected Fc units. Our compendium of experimental evidence combined with nonequilibrium Green function calculations contemplate a plausible scenario to explain the exceedingly high measured conductance based on the electrode/molecule contact via multiple Fc units. The oligo-Fc backbone is initially connected through all Fc units, and, as one of the junction electrodes is pulled away, each Fc unit is sequentially disconnected from one of the junction terminals, resulting in several distinct conductance features proportional to the number of Fc units in the backbone. The conductance values are independent of the applied temperature (-10 to 85 °C), which indicates that the mechanism of charge transport is coherent tunneling for all measured configurations. These measurements show the direct Fc-electrode coupling provides highly efficient molecular conduits with very low barrier for electron tunneling and whose conductivity can be modulated near the ballistic regime through the number of Fc units able to bridge and the energy position of the frontier molecular orbital

Probing the effect of the solution environment around redox-active moieties using rigid anthraquinone terminated molecular rulers

Herein, we report the influence of the position and the solution environment around surface-bound redox-active moieties on their redox reaction. The study was made possible by using rigid norbornylogous bridges, which possess anthraquinone (AQ) moieties. An L-shaped norbornylogous bridge (L-NB) and straight-shaped norbornylogous bridge (S-NB) were used to situate AQ moieties at well-defined position and environments above a mixed alkanethiol self-assembled monolayer (SAM) on Au (111) surfaces. Sum frequency generation (SFG) vibrational spectroscopy was employed to evaluate the interaction between the S-NB and L-NB with diluent molecules in the mixed SAMs. The SFG measurements demonstrated that hydrogen-bonding interactions were formed between AQ moieties of L-NB and diluent molecules terminated by hydroxyl group within a suitable separation. The SFG observations provided information about the relative position of the AQ moieties in each SAM, which significantly affects the thermodynamics and the kinetics of the electron transfer on the electrode/solution interface. The rate constant (k et) of the electron transfer between the AQ moiety and the gold surface and the apparent formal potential (E 0′) were studied using cyclic voltammetry (CV), alternating current voltammetry (ACV), and electrochemical impedance spectroscopy (EIS). It was found that the k et increases and E 0′ shifts to more anodic values as the distance between the AQ moiety and the surface of the diluent was increased, for both methyl and hydroxyl terminated diluent. These results are discussed in relation to H-bonding interactions with water surrounding the AQ moieties. 2012 American Chemical Society