147 research outputs found
Electromagnetic Simulation for THz Antenna-Coupled Microbolometers Operated at Room Temperature
Room-temperature terahertz (THz) detectors with higher performance are necessary for utilizing the THz wave in various sensing, spectroscopy and imaging, but even the best ones in the present are still insufficient for the practical applications. This issue is essential especially in the region around 1 THz at which there exists a large technology gap between microwave and middle-infrared. Therefore, we study to develop an antenna-coupled microbolometer to achieve a high-performance THz detector operated at a room-temperature for sensing at around 1 THz frequency wave. In this paper, we present several important features and results obtained from electromagnetic simulations, which help to design a structure of the antenna and heater to absorb efficiently the power of THz wave
Antenna-Coupled Terahertz Microbolometers with Meander Structures: the Comparison of Titanium and Platinum Thermistors
The Stellar Population of the M31 Spiral Arm Around OB Association A24
A study of the stellar population of the M31 spiral arm around OB association
A24 was carried out based on the photometric data obtained from deep V and JHK
imaging. The luminosity function was obtained for -7 <~ Mbol <~ -3.5 by
applying the extinction correction corresponding to Av=1 and the bolometric
correction BC(K) as an empirical function of (J-K)o. In comparing the observed
color-luminosity diagrams with semitheoretical isochrones modified for the
dust-shell effects, we found the young population of t <~ 30 Myr with
supergiants of Mbol <~ -5, the bulk of the intermediate-age population of t ~
0.2 - 2.5 Gyr with bright asymptotic giant branch (AGB) stars of -5 <~ Mbol <~
-4, and old populations of t ~> 3 Gyr with AGB and red giant branch (RGB) stars
of Mbol ~> -4. The average star formation rate was estimated to be ~1.8x10^4
M_o/Myr and ~0.7x10^4 M_o/Myr per deprojected disk area of 1 kpc^2 from the
number density of B0 V stars around Mv=-4.0 (age ~10 Myr) and the number
density of bright AGB stars around Mbol = -4.3 (age ~1 Gyr), respectively. A
study of the local variation in the V and the J and H luminosity functions
revealed a kind of anticorrelation between the population of the young
component and that of the intermediate-age component when subdomains of ~100 pc
scales were concerned. This finding suggests that the disk domain around the
A24 area experienced a series of star formation episodes alternatively among
different subdomains with a timescale of a few spiral passage periods. Brief
discussions are given about the interstellar extinction and about the lifetimes
of bright AGB stars and the highly red objects (HROs) in the same area.Comment: 27 pages, 11 figures, accepted: ApJ, July 1, 199
In Vitro Corrosion Properties of Mg Matrix In Situ Composites Fabricated by Spark Plasma Sintering
Mg matrix in situ composites were fabricated from Mg and ZnO powder by a spark plasma sintering method. The composition and microstructure of the sintered samples were characterized. Corrosion properties of fabricated composites were evaluated by immersion and by electrochemical tests using Hanks’ solution. The results showed that the formation of in situ products improved significantly the corrosion resistance of the fabricated composites compared with pure Mg; Mg-10 wt % ZnO composites especially exhibited the lowest corrosion rate. In addition, an energy-dispersive X-ray (EDX) analysis showed that calcium phosphate formed as a corrosion product on the surface of Mg-10 wt % ZnO composites, while Mg(OH)_2 appeared as a corrosion product on the surface of Mg-20 wt % ZnO composite. The findings suggested Mg-10 wt % ZnO composite as a potential candidate for temporary implant application
Fretting corrosion of hafnium in simulated body fluids.
Hafnium has been suggested as an interesting material for biomedical applications due to its good biocompatibility and osteogenesis. However, its behaviour under fretting corrosion conditions, found in applications such as dental and joint implants, has not been studied in depth. A three-electrode electrochemical cell integrated with a ball-on-flat reciprocating tribometer was used to investigate the corrosion of hafnium and commercially pure (CP) titanium in simulated body fluids. An increased susceptibility to pitting corrosion was observed when hafnium was subjected to fretting. Open circuit potential measurements showed a more severe mechanical depassivation due to fretting in the case of CP titanium in comparison to hafnium. In addition, the anodic currents measured during potentiostatic tests were also higher for CP titanium
Adaptive Optics Imaging of Low-redshift Damped Lyman-alpha Quasar Absorbers
We have carried out a high angular resolution near-infrared imaging study of
the fields of 6 quasars with 7 strong absorption line systems at z < 0.5, using
the Hokupa'a adaptive optics system and the QUIRC near-infrared camera on the
Gemini-North telescope. These absorption systems include 4 classical damped
Lyman-alpha absorbers (DLAs), 2 sub-DLAs, and one Lyman-limit system. Images
were obtained in the H or K' filters with FWHM between 0.2"-0.5" with the goal
of detecting the absorbing galaxies and identifying their morphologies.
Features are seen at projected separations of 0.5"-16.0" from the quasars and
all of the fields show features at less than 2" separation. We find candidate
absorbers in all of the seven systems. With the assumption that some of these
are associated with the absorbers, the absorbers are low luminosity < 0.1 L*_H
or L*_K; we do not find any large bright candidate absorbers in any of our
fields. Some fields show compact features that are too faint for quantitative
morphology, but could arise in dwarf galaxies.Comment: 37 pages, 24 figures, 5 tables, Accepted on Oct. 26 2005 for
publication in Astronomical Journal. The figures have been lowered in
resolution to make them fit the size requirements for astroph submission. A
PDF file with original high-resolution figures can be found at
http://boson.physics.sc.edu/~kulkarni/dlahq.htm
The biocompatibility of titanium in a buffer solution: compared effects of a thin film of TiO2 deposited by MOCVD and of collagen deposited from a gel
This study aims at evaluating the biocompatibility of titanium surfaces modified according two different ways: (i) deposition of a bio-inert, thin film of rutile TiO2 by chemical vapour deposition (MOCVD), and (ii) biochemical treatment with collagen gel, in order to obtain a bio-interactive coating. Behind the comparison is the idea that either the bio-inert or the bio-active coating has specific advantages when applied to implant treatment, such as the low price of the collagen treatment for instance. The stability in buffer solution was evaluated by open circuit potential (OCP) for medium time and cyclic voltametry. The OCP stabilized after 5104 min for all the specimens except the collagen treated sample which presented a stable OCP from the first minutes. MOCVD treated samples stabilized to more electropositive values. Numeric results were statistically analysed to obtain the regression equations for long time predictable evolution. The corrosion parameters determined from cyclic curves revealed that the MOCVD treatment is an efficient way to improve corrosion resistance. Human dermal fibroblasts were selected for cell culture tests, taking into account that these cells are present in all bio-interfaces, being the main cellular type of connective tissue. The cells grew on either type of surface without phenotype modification. From the reduction of yellow, water-soluble 3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT cytotoxicity test), MOCVD treated samples offer better viability than mechanically polished Ti and collagen treated samples as well. Cell spreading, as evaluated from microscope images processed by the program Sigma Scan, showed also enhancement upon surface modification. Depending on the experimental conditions, MOCVD deposited TiO2 exhibits different nanostructures that may influence biological behaviour. The results demonstrate the capacity of integration in simulated physiologic liquids for an implant pretreated by either method
Fatal Cases of Influenza A(H3N2) in Children: Insights from Whole Genome Sequence Analysis
During the Northern Hemisphere winter of 2003–2004 the emergence of a novel influenza antigenic variant, A/Fujian/411/2002-like(H3N2), was associated with an unusually high number of fatalities in children. Seventeen fatal cases in the UK were laboratory confirmed for Fujian/411-like viruses. To look for phylogenetic patterns and genetic markers that might be associated with increased virulence, sequencing and phylogenetic analysis of the whole genomes of 63 viruses isolated from fatal cases and non fatal “control” cases was undertaken. The analysis revealed the circulation of two main genetic groups, I and II, both of which contained viruses from fatal cases. No associated amino acid substitutions could be linked with an exclusive or higher occurrence in fatal cases. The Fujian/411-like viruses in genetic groups I and II completely displaced other A(H3N2) viruses, but they disappeared after 2004. This study shows that two A(H3N2) virus genotypes circulated exclusively during the winter of 2003–2004 in the UK and caused an unusually high number of deaths in children. Host factors related to immune state and differences in genetic background between patients may also play important roles in determining the outcome of an influenza infection
- …