Microwave sintering of dense and lattice 3Y-TZP samples shaped by digital light processing

Nowadays it is possible to produce ceramic parts with solid and complex shapes with rapid and efficient shaping and sintering techniques. In this paper, 3mol% yttria stabilized zirconia (3Y-TZP) dense and lattice parts were shaped by Digital light processing method (DLP) and densified by conventional (CV) and microwave (MW) sintering. 3Y-TZP samples were MW sintered up to 1550 °C with different heating rates (10, 30, and 50 °C/min) for the dense samples and 30 °C/min for the lattice samples. Controlled thermal cycles with a homogenous heating and no thermal runaway was reached. CV sintering was carried out at 10 °C/min up to 1550 °C. No inter-layer delamination was detected after sintering by the two methods. Both dense and lattice MW-sintered samples reached high final densities (equivalent to obtained values with CV-sintered samples, i.e., ≥98% T.D.), but exhibited a lower average grain size than CV-sintered materials. The different architectures between dense and lattice samples resulted in a different specific absorbed power: the power absorbed by the dense sample is lower than that absorbed by the lattice one meaning that this sample architecture heats up easily

El primer paso : leyenda trágica en tres actos, original y en verso

Copia digital. Valladolid : Junta de Castilla y León. Consejería de Cultura y Turismo, 201

Understanding Individual Differences for Tailored Smoking Cessation Apps

Finding ways to help people quit smoking is a high priority in health behavior change research. Recent HCI studies involving technologies using specific quitting techniques such as social support and SMS messaging to help people quit have reported some success. Early studies using computer generated print material report significant success of tailored versus non-tailored material, however, there is limited understanding on what aspects of digitally delivered quitting assistance should be tailored and how. To address this, we have conducted an empirical investigation with smokers to identify perceived importance of different types of help when quitting and the potential role of technology in providing such help. We found that people are highly individual in their approach to quitting and the kind of help they regard as relevant to their situation. Our contribution is a collection of empirically derived themes for tailoring smoking cessation apps to individual quitting needs. Author Keywords Smoking cessation; tailoring; individual differences; healt

Hydrogen production during the irradiation of gaseous organic compounds: advantage of an extracted beam

ACE, Accélérateur, NIMBInternational audienceThis paper presents a fundamental study of the radiolysis of gaseous organic molecules induced by proton beam. For that purpose, a specific extracted beam line associated with a gas irradiation cell was set up on the 4 MV facility of the Institut de Physique Nucléaire of Lyon. The first experiments have been performed with gaseous alkanes and alkenes. The gaseous species formed during irradiation are analysed by an on-line gas chromatography instrument equipped with two detectors. In order to test our experimental faiclity, we have studied the influence of irradiation parameters (duration, beam intensity, pressure) on the production of hydrogen. In the case of propane, the radiolytic yield value of hydrogen G(H$_2$) is equal to 3.7 for total does in the range of 0.4 to 2.3 MGy at atmospheric pressure

Application of a magnetic suspension balance to the oxidation study of the zirconium based alloys under high pressurewater vapour

International audienceThe fuel claddings in the Pressurised Water Reactor are corroded in water at high temperature and high pressure. The technical device ableto follow continuously the corrosion rate in conditions close to this medium does not yet exist. That is the reason why a high pressure thermogravimetric installation based on magnetic suspension has been designed to study in situ the oxidation kinetics of the zirconium based alloys under water vapour until 50 bars of pressure at 415°C. The accuracy of measurements is about 5•10–5 g under 2 bars, and 10–4 g under 50 bars. The reproducibility of measurements was verified and the deviation regarding post test weighing at room temperature is around 5•10–5 g what is clearly satisfying. Finally, the results presented in this work allow validating the high pressure thermogravimetric measurements obtained with this magnetic suspension device

An assessment of drinking water contamination with Helicobacter pylori in Lima, Peru

BackgroundHelicobacter pylori is a gut bacterium that is the primary cause of gastric cancer. H. pylori infection has been consistently associated with lack of access to sanitation and clean drinking water. In this study, we conducted time‐series sampling of drinking water in Lima, Peru, to examine trends of H. pylori contamination and other water characteristics.Materials and methodsDrinking water samples were collected from a single faucet in Lima’s Lince district 5 days per week from June 2015 to May 2016, and pH, temperature, free available chlorine, and conductivity were measured. Quantities of H. pylori in all water samples were measured using quantitative polymerase chain reaction. Relationships between the presence/absence and quantity of H. pylori and water characteristics in the 2015‐2016 period were examined using regression methods accounting for the time‐series design.ResultsForty‐nine of 241 (20.3%) of drinking water samples were contaminated with H. pylori. Statistical analyses identified no associations between sampling date and the likelihood of contamination with H. pylori. Statistically significant relationships were found between lower temperatures and a lower likelihood of the presence of H. pylori (P < .05), as well as between higher pH and higher quantities of H. pylori (P < .05).ConclusionsThis study has provided evidence of the presence of H. pylori DNA in the drinking water of a single drinking water faucet in the Lince district of Lima. However, no seasonal trends were observed. Further studies are needed to determine the presence of H. pylori in other drinking water sources in other districts in Lima, as well as to determine the viability of H. pylori in these water sources. Such studies would potentially allow for better understanding and estimates of the risk of infection due to exposure to H. pylori in drinking water.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/142894/1/hel12462.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/142894/2/hel12462_am.pd

Effect of strain rate on tensile mechanical properties of high-purity niobium single crystals for SRF applications

An investigation of the mechanical properties of high-purity niobium single crystals is presented. Specimens were cut with different crystallographic orientations from a large grain niobium disk and uniaxial tensile tests were conducted at strain rates between 10-4 and 103 s-1. The logarithmic strain rate sensitivity for crystals oriented close to the center of a tensile axis inverse pole figure (IPF) is ~0.14 for all strain rates. The strain at failure (ranging from 0.4 to 0.9) is very sensitive to crystal orientation and maximal at ~10-2 s-1 for crystals oriented close to the center of an IPF. The high anisotropy observed at quasi-static strain rates decreased with increasing strain rate. The activation of multiple slip systems in the dynamic tests could account for this reduction in anisotropy. A transition from strain hardening to softening in the plastic domain was observed at strain rates greater than approximately 6 × 10-2 s-1 for crystals oriented close to the center of a tensile axis IPF. Shear bands were observed in specimens with orientations having similarly high Schmid factors on both {110} and {112} slip families, and they are correlated with reduced ductility. Crystal rotations at fracture are compared for the different orientations using scanning electron microscopy images and EBSD orientation maps. A rotation toward the terminal stable [101] orientation was measured for the majority of specimens (with tensile axes more than ~17° from the [001] direction) at strain rates between 1.28 × 10-2 and 1000 s-1.The authors would like to acknowledge the work of CERN's Materials, Metrology and Non-Destructive Testing (EN-MME-MM) section for granting access to their equipment for specimen preparation and scanning electron microscope (SEM) analyses. The authors would also like to thank Mr. Larry Vladic of Elite Motion LLC for lending us the high-speed camera during the high strain rate tests performed ASU. This Marie Sklodowska-Curie Action (MSCA) Innovative Training Network (ITN) receives funding from the European Union's H2020 Framework Programme under grant agreement no. 764879. T.R. Bieler, D. Kang, E. Pai Kulyadi, P. Eisenlohr, C. Kale, and K.N. Solanki acknowledge support from DOE/OHEP grant DE-SC0009962

Impact of tetanus-diphtheria-acellular pertussis immunization during pregnancy on subsequent infant immunization seroresponses : follow-up from a large randomized placebo-controlled trial

Background: Pertussis immunization during pregnancy results in high pertussis antibody concentrations in young infants but may interfere with infant immune responses to post-natal immunization. Methods: This phase IV, multi-country, open-label study assessed the immunogenicity and safety of infant primary vaccination with DTaP-HepB-IPV/Hib and 13-valent pneumococcal conjugate vaccine (PCV13). Enrolled infants (6\u201314 weeks old) were born to mothers who were randomized to receive reduced-antigen-content diphtheria-tetanus-three-component acellular pertussis vaccine (Tdap group) or placebo (control group) during pregnancy (270/7\u2013366/7 weeks\u2019 gestation) with crossover immunization postpartum. All infants received 2 or 3 DTaP-HepB-IPV/Hib and PCV13 doses according to national schedules. Immunogenicity was assessed in infants pre- and 1 month post-primary vaccination. The primary objective was to assess seroprotection/vaccine response rates for DTaP-HepB-IPV/Hib antigens 1 month post-primary vaccination. Results: 601 infants (Tdap group: 296; control group: 305) were vaccinated. One month post-priming, seroprotection rates were 100% (diphtheria; tetanus), 6598.5% (hepatitis B), 6595.9% (polio) and 6594.5% (Hib) in both groups. Vaccine response rates for pertussis antigens were significantly lower in infants whose mothers received pregnancy Tdap (37.5\u201377.1%) versus placebo (90.0\u201399.2%). Solicited and unsolicited adverse event rates were similar between groups. Serious adverse events occurred in 2.4% (Tdap group) and 5.6% (control group) of infants, none were vaccination-related. Conclusions: Pertussis antibodies transferred during pregnancy may decrease the risk of pertussis infection in the first months of life but interfere with the infant's ability to produce pertussis antibodies, the clinical significance of which remains unknown. Safety and reactogenicity results were consistent with previous experience

Expression network analysis of bovine skin infested with Rhipicephalus australis identifies pro-inflammatory genes contributing to tick susceptibility

The skin is the primary feeding site of ticks that infest livestock animals such as cattle. The highly specialised functions of skin at the molecular level may be a factor contributing to variation in susceptibility to tick infestation; but these remain to be well defined. The aim of this study was to investigate the bovine skin transcriptomic profiles of tick-naïve and tick-infested cattle and to uncover the gene expression networks that influence contrasting phenotypes of host resistance to ticks. RNA-Seq data was obtained from skin of Brangus cattle with high (n = 5) and low (n = 6) host resistance at 0 and 12 weeks following artificial tick challenge with Rhipicephalus australis larvae. No differentially expressed genes were detected pre-infestation between high and low resistance groups, but at 12-weeks there were 229 differentially expressed genes (DEGs; FDR &lt; 0.05), of which 212 were the target of at least 1866 transcription factors (TFs) expressed in skin. Regulatory impact factor (RIF) analysis identified 158 significant TFs (P &lt; 0.05) of which GRHL3, and DTX1 were also DEGs in the experiment. Gene term enrichment showed the significant TFs and DEGs were enriched in processes related to immune response and biological pathways related to host response to infectious diseases. Interferon Type 1-stimulated genes, including MX2, ISG15, MX1, OAS2 were upregulated in low host resistance steers after repeated tick challenge, suggesting dysregulated wound healing and chronic inflammatory skin processes contributing to host susceptibility to ticks. The present study provides an assessment of the bovine skin transcriptome before and after repeated tick challenge and shows that the up-regulation of pro-inflammatory genes is a prominent feature in the skin of tick-susceptible animals. In addition, the identification of transcription factors with high regulatory impact provides insights into the potentially meaningful gene–gene interactions involved in the variation of phenotypes of bovine host resistance to ticks