PFC Topologies for AC to DC Converters in DC Micro-Grid

With increasing dominance of renewable energy resources and DC household appliances, the novelty of DC micro grid is attracting significant attention. The key interface between the main supply grid and DC micro grid is AC to DC converter. The conventional AC to DC converter with large output capacitor introduces undesirable power quality problems in the main supply current. It reduces system efficiency due to low power factor and high harmonic distortion. Power Factor Correction (PFC) circuits are used to make supply currents sinusoidal and in-phase with supply voltages. This paper presents different PFC topologies for single phase AC to DC converters which are analyzed for power factor (PF), total harmonic distortion (THD) and system efficiency by varying output power. Two-quadrant shunt active filter topology attains a power factor of 0.999, 3.03% THD and 98% system efficiency. Output voltage regulation of the presented active PFC topologies is simulated by applying a step load. Two-quadrant shunt active filter achieves better output voltage regulation compared to other topologies and can be used as grid interface

Design and implementation of hybrid vehicle using control of DC electric motor

The electric motors and its control technology are key components of hybrid electric vehicles (HEVs). Control of the electric motor is a fundamental issue for traction application in electric vehicles and HEVs. This paper presents the design, development and implementation of a hybrid vehicle using both an electric motor and petrol engine to increase efficiency and decrease carbon footprint. Initially, a prototype of a HEV is designed and the performance values are calculated, before a control system is developed and implemented to control the DC motor speed using a microcontroller as the vehicle’s electronic control unit along with simple proportional integral derivative (PID) control using speed as a feedback mechanism. The prototype made incorporated voltage, current, speed and torque sensors for feedback resulting in a closed loop control system which successfully matched the speed input of a user-controlled pedal sensor. A user interface was developed to show the driver of the vehicle key variables such as the revolutions per minute (RPM) of the motor, the speed of the vehicle along with the current being drawn, and the voltage applied to the motor with overall power. To output a variable voltage from the Arduino, a digital output was used with pulse width modulation (PWM) capabilities in order to provide a variable DC voltage to the speed controller

A hybrid power transfer allocation approach for deregulated power systems

Power transfer allocation is one of the major issues in deregulated power industry. This paper presents a hybrid technique for power transfer allocation. It is based on combining the existing power flow tracing methods that determines the power share from generators to line flows and loads. The advantages of the proposed method are demonstrated by the tests conducted on the IEEE 30-bus system and also on a practical bus equivalent power system of south Malaysia. The proposed method provides better reliability and minimizes the limitations of conventional power flow tracing methods

NAVIER–STOKES EQUATIONS ON THE β-PLANE

Mathematical analysis has been undertaken for the vorticity formulation of the two dimensional Navier–Stokes equation on the β-plane with periodic boundary conditions. This equation describes the flow of fluid near the equator of the Earth. The long time behaviour of the solution of this equation is investigated and we show that, given a sufficiently regular forcing, the solution of the equation is nearly zonal. We use this result to show that, for sufficiently large β, the global attractor of this system reduces to a point. Another result can be obtained if we assume that the forcing is time-independent and sufficiently smooth. If the forcing lies in some Gevrey space, the slow manifold of the Navier–Stokes equation on the β-plane can be approximated with O(εn/2) accuracy for arbitrary n = 0, 1, · · · , as well as with exponential accuracy

How the presentation of patient information and decision-support advisories influences opioid prescribing behavior: A simulation study

ObjectiveThe United States faces an opioid crisis. Integrating prescription drug monitoring programs into electronic health records offers promise to improve opioid prescribing practices. This study aimed to evaluate 2 different user interface designs for prescription drug monitoring program and electronic health record integration.Materials and MethodsTwenty-four resident physicians participated in a randomized controlled experiment using 4 simulated patient cases. In the conventional condition, prescription opioid histories were presented in tabular format, and computerized clinical decision support (CDS) was provided via interruptive modal dialogs (ie, pop-ups). The alternative condition featured a graphical opioid history, a cue to visit that history, and noninterruptive CDS. Two attending pain specialists judged prescription appropriateness.ResultsParticipants in the alternative condition wrote more appropriate prescriptions. When asked after the experiment, most participants stated that they preferred the alternative design to the conventional design.ConclusionsHow patient information and CDS are presented appears to have a significant influence on opioid prescribing behavior

Simulation Studies of Gas-Solid in the Riser of a Circulating Fluidized Bed

A numerical parametric study was performed on the influence of various riser exit geometries on the hydrodynamics of gas-solid two-phase flow in the riser of a Circulating Fluidized Bed (CFB). A Eulerian continuum formulation was applied to both phases. A two fluid framework has been used to simulate fully developed gas-solid flows in vertical riser. A two dimensional Computational Fluid Dynamics (CFD) model of gas-particle flow in the CFB has been investigated using the code FLUENT. The turbulence was modeled by a k-e turbulence model in the gas phase. The simulations were done using the geometrical configuration of a CFB test rig at the Universiti Teknologi Malaysia (UTM). The CFB riser column has 265 mm (width), 72 mm (depth) and 2.7 m height. The riser is made up of interchangeable Plexiglas columns. The computational model was used to simulate the riser over a wide range of operating and design parameters. In addition, several numerical experiments were carried out to understand the influence of riser end effects, particle size, gas solid velocity and solid volume fraction on the simulated flow characteristics. The CFD model with a k-e turbulence model for the gas phase and a fixed particle viscosity in the solids phase showed good mixing behaviour. These results were found to be useful in further development of modeling of gas solid flow in the riser

Antioxidants from Natural Sources

Antioxidants are the defense system of the body against the damage of reactive oxygen species, which is normally produced during the various physiological processes in the body. There are various sources of these antioxidants like endogenous antioxidant present in the body and exogenous food source. In recent decades, alternate of synthetic food antioxidants by natural ones has fostered interest on vegetable sources and the screening of inexpensive raw materials particularly from the agriculture for identifying new antioxidants. Polyphenols are the significant plant compounds with antioxidant activity, though not the only ones. Some but not only restricted to biological properties such as anticarcinogenicity, antimutagenicity, antiallergenicity, and antiaging activity have been reported for natural and synthetic antioxidants. Among the sources of natural antioxidants, the most important are those coming from routinely consuming vegetables and fruits; however, antioxidant from other plant and agriculture waste should not be ignored

Political and Economic Impacts of Brexit on UK

Brexit is a term used to explain about the departure or withdrawal of Great Britain from the European Union. Brexit is a very important political development of recent political scenario of Europe. It has its impacts on the economic and political future of both UK and EU. The UK is enjoying membership of the EU from the beginning. But in mid of 2016 a referendum was held in UK to decide whether they should remain in EU or exit. The British people decide in favor of exit with a simple majority of 51.9%. After that referendum British Prime Minister David Cameron resigned and new general elections were held in 2017. Since the referendum the UK and EU are negotiating on an exit deal and the UK is due to leave the union on 29th March 2019. It will have its dimensions and implications. There are voices rose demanding a new referendum on the issue because many British people think that the Brexit is not good for UK. There are pro EU voices in European countries who also wish UK to remain part of this community. In this descriptive study ‘impacts of Brexit on UK’ has been discussed and economic and political dimensions have been observed by the researchers

Improving Voltage Profile of Islanded Microgrid using PI Controller

In islanding operating mode of microgrid, the voltage and frequency of system must be maintained by the microgrid, or else the system will crumble due to the characteristics of different distributed generators (DG) utilized in microgrid. The voltage and frequency lost provision when main grid is disconnected. This paper presents PI controller based voltage controller to regulate voltage to its normal condition. The controller is proposed to be utilized individually with each distributed generator (DG) in microgrid. The controller compares inverter output voltage with voltage at point of common coupling (PCC) and its output is feed to PWM pulse generator to generate appropriate pulses for inverter to regulate voltage to its nominal value. The simulation results of proposed system are shown using MATLAB/Simulink platform