Laser microprobe for the study of noble gases and nitrogen in single grains: a case study of individual chondrules from the Dhajala meteorite

A laser microprobe capable of analysing nitrogen and noble gases in individual grains with masses less than a milligram is described. It can be used in both continuous wave (CW) mode, useful for stepwise heating of an individual grain, as well as in pulsed mode, useful for ablating material from a small selected area of a sample, for gas extraction. We could achieve low blanks (in ccSTP units) for 4He(4.8 × 10{-12}),22Ne(1.0 × 10{-12}),36Ar(1.0 × 10 -13),84Kr(2.9 × 10{-14}),132 Xe(2.6 × 10{-14}), and N (87 pg), using this system. Preliminary data for individual chondrules from the Dhajala meteorite show that noble gases and nitrogen from grains as small as 170 microgram can be analysed using the present laser microprobe setup. The amount of trapped neon in Dhajala chondrules is very small, and nitrogen in the chondrules is isotopically heavier as compared to the bulk meteorite

Kinetics of Oxidation of Methyl Orange & Methyl Red by V(V)*

16-1

Multivariate analysis of genetic divergence in Eu sorghums

A study of the nature of genetic divergence in Sorghum by multivariate analysis was undertaken to examine the nature of differentiation within this genus and to improve the existing criteria of its classification. Forty-six populations of Eu-Sorghum representing its different series and sub-series were selected. Based on Mahalanobis D2-statistic, the population could be grouped into 15 clusters. The spatial disposition of the clusters and their relative divergence was in broad agreement with that of Snowden in seven clusters, but only in partial agreement in the other cases with the phylogenetic relations indicated by him. The grouping was confirmed by canonical analysis. After a comparison of the present results with those reported by others, the sub-genus Eu-Sorghum could be divided into nine species

Some three dimensional elasto-dynamic solutions of layered shells

Three dimensional solutions for natural frequencies and mode shapes of layered composite shells obtained by using the finite layer method, are presented in this paper. Higher order theories for laminated shells are discussed

Steel Industry-Wastes as New Materials for Road Construction

A large number of steel plants have been set up in India and they are producing several million tonnes of iron and steel. However, the production of iron and steel is always associated with the generation of waste materials like air cooled slag, steel slag, granulated slag and flyash etc. These materials are posing serious problems of disposal and causing environmental pollution. Road Construction is one such sector where these materials can be utilised in bulk. CRRI started a few projects sponsored by Steel Authority of India Limited (SAIL), and all these materials were tested on a big scale in CRRI laboratory. Based on the success of laboratory results, various combinations were tried in the field and finally a road was constructed. This road has been monitored regularly for surface unevenness and pavement structural strength. This paper gives the results of extensive laboratory investigations and performance of the road

Model simulation of tide-induced currents in Gauthami-Godavari estuary

Predictive spatial distribution of flow field has been simulated from the time series data on currents and tides during dry season (11-19, February, 2009) in the Gauthami-Godavari Estuary utilizing TIDAL model. A 2D-Tidal Estuarine model has been considered (instead of 3D model) due to well-mixed type system and its circulation is dominated by tides during the observational period. The model forcing functions consist of wind and tidal elevations along the open boundaries and no fresh water inflow from the main stream and no land flood in river system. The bathymetry data of the river basin has been collected and supplemented to the model as one of the rigid boundary conditions to evaluate integration. The bottom roughness length (K) was adjusted to achieve model calibration and verification in model simulations of flow field. The model simulation results are in qualitative agreement with the observational data with calibrated bottom roughness length which is about 0.085 m. Model results reveal that the majority of flow was found to be along the channel axis (i.e. high iso-bath contour). During flood time, flow is south-west direction and it is changed to northeast direction during ebb period which is indicating that the model results resemble flow in the real eastern system

A localised chlorophyll deficiency associated with male sterility in Nicotiana tabacum L.

This article does not have an abstract

Control of Surficial Slides by Different Erosion Control Techniques

Many natural and embankment slopes fall due to the erosion of the top surficial soil mantle. Denudation of vegetation from soil slopes combined with the further steepening of slopes due to natural and man-made causes such as cuts result in such a type of failure. Essentially, the corrective measures appropriate for stabilizing these slopes comprise erosion control by establishing vegetation on the slope. The methods of vegetative turfing include asphalt mulch, coir/jute netting, geogrids and stone apron techniques. The paper sets forth the case history giving details of some of the relatively new techniques for erosion control on a hill road in India and evaluates the relative performance and the relative economics of these methods

India\u27s First Venture Relating to Subsurface Drainage by Horizontal Drains

Landslides in the Nilgiris district in 1978-79 1 caused heavy damages to property and human life. The field studies indicated that in certain spots, the build up of excess hydrostatic pressure, caused by direct and indirect ingress of water into the soil mantle, is the main cause for certain landslides in the region. The paper attempts to give the total case history relating to a pioneering venture of its kind towards the correction of landslides undertaken in India. The case history assumes special significance in as much as the horizontal drains successfully installed for the first time in this country, provided the needed ocular demonstration of the efficacy of horizontal drains to the practicing engineers in India

Classification of Facial Expressions based on Transitions Derived from Third Order Neighborhood LBP

The present paper extended the LBP transitions derived from second-order neighbourhood on to third order neighbourhood LBP (TN-LBP) and derived transitions on Trapezoid patterns for facial expression classification. The TN-LBP forms four Trapezoid Patterns (TP) i.e. top left, bottom right and top right, bottom left. So far no researcher carried out work on classification problem based on transitions on third-order neighborhood LBP. The present paper derived transitions on the two reciprocal 201C;Trapezoids of TN-LBP (T-TN-LBP) i.e. top left vs. bottom right. Each of these Trapezoids on TN-LBP will have five pixies and each of them will have 25 i.e 32 patterns. The present paper derived transitions on two symmetric T-TN-LBP. Based on this, facial expression recognition algorithm is built. The proposed approach is compared with the existing methods