Removal of phosphate from River water using a new baffle plates electrochemical reactor

During the last 50 years, the human activities have significantly altered the natural cycle of phosphate in this planet, causing phosphate to accumulate in the freshwater ecosystems of some countries to at least 75% greater than preindustrial levels, which indicates an urgent need to develop efficient phosphate treatment methods. Therefore, the current study investigates the removal of phosphate from river water using a new electrochemical cell (PBPR). This new cell utilises perforated baffle plates as a water mixer rather than magnetic stirrers that require power to work. This study investigates the influence of key operational parameters such as initial pH (ipH), current density (Ј), inter-electrode distance (ID), detention time (t) and initial phosphate concentration (IC) on the removal efficiency, and influence of the electrocoagulation process on the morphology of the surface of electrodes. Overall, the results showed that the new reactor was efficient enough to reduce the concentration of phosphate to the permissible limits. Additionally, SEM images showed that the Al anode became rough and nonuniform due to the production of aluminium hydroxides. The main advantages of the electrocoagulation technique are: 1- The EC method does not produce secondary pollutants as it does not required chemical additives, while other traditional treatment methods required either chemical or biological additives [[1], [2], [3], [4]]. 2- It has a large treatment capacity and a relatively short treatment time in comparison with other treatment methods, such as the biological methods [1,[5], [6], [7]]. 3- The EC method produces less sludge than traditional treatment traditional chemical and biological treatment methods [8,9]. EC technology, like any other treatment method, has some drawbacks that could limit its performance. For instance, it still has a clear deficiency in the variety of reactor design, and the electrodes should be periodically replaced as they dissolve into the solution due to the oxidation process [2,10]

Electrocoagulation as a green technology for phosphate removal from River water

The current study investigates the removal of phosphate from water using a new baffle plates aluminium-based electrochemical cell (PBPR) taking consideration the influence of key operating parameters. This new cell utilises perforated baffle plates as a water mixer rather than magnetic stirrers that require extra power to work. As this unit is new, a comprehensive study has been carried to assess it performance. This study also includes preliminary estimates of the reactor’s operating costs, the amount of H2 gas produced and the yieldable energy from it. SEM (scanning electron microscope) was used to investigate the influence of the electrocoagulation process on the morphology of the surface of aluminium electrodes, and an empirical model developed to reproduce the phosphate removal process. The results showed that 99% of phosphate was removed within 60 minutes of electrolysis at an initial pH (ipH) of 6, inter-electrode distance (ID) of 0.5 cm, current density (J) of 6 mA/cm2, initial concentration of phosphate (IC) of 100 mg/L, and minimum operating cost of 0.503 US $/m3. The electrochemical cell produced enough H2 gas to generate 4.34 kWh/m3 of power. Statistically, it was proved that the influence of the operating parameters on phosphate removal could be modelled with an R2 of 0.882, the influence of these operating parameters on phosphate removal following the order: t>J>IC>ipH >ID. Finally, SEM images showed that after several electrolysing runs, the Al anode became rough and nonuniform which could be related to the production of aluminium hydroxides

Electrochemical defluorination of water: an experimental and morphological study

This experimental study concerns the elimination of fluoride from water using an electrocoagulation reactor having a variable flow direction in favour of increasing the electrolysing time, saving the reactor area, and water mixing. The detention time of the space-saver EC reactor (S-SECR) was measured and compared to the traditional reactors using an inert dye (red drain dye). Then, the influence of electrical current (1.5 ≤ δ ≤ 3.5 mA cm−2), pH of water (4 ≤ pH ≤ 10), and distance between electrodes (5 ≤ ϕ ≤ 15) on the defluoridation of water was analysed. The effect of the electrolysing activity on the electrodes' morphology was studied using scanning electron microscopy (SEM). Additionally, the operational cost was calculated. The results confirmed the removal of fluoride using S-SECR met the guideline of the World Health Organization (WHO) for fluoride levels in drinking water of ≤1.5 mg/L. S-SECR abated fluoride concentration from 20 mg/L to the WHO's guideline at δ, ϕ, pH, operational cost, and power consumption of 2.5 mA cm−2, 5 mm, 7, 0.346 USD m−3, and 5.03 kWh m−3, respectively. It was also found the S-SECR enhanced the detention time by 190% compared to the traditional reactors. The appearance of dents and irregularities on the surface of anodes in the SEM images proves the electrolysing process.Validerad;2022;Nivå 2;2022-04-29 (sofila)</p