Analysis of modified SMI method for adaptive array weight control

An adaptive array is applied to the problem of receiving a desired signal in the presence of weak interference signals which need to be suppressed. A modification, suggested by Gupta, of the sample matrix inversion (SMI) algorithm controls the array weights. In the modified SMI algorithm, interference suppression is increased by subtracting a fraction F of the noise power from the diagonal elements of the estimated covariance matrix. Given the true covariance matrix and the desired signal direction, the modified algorithm is shown to maximize a well-defined, intuitive output power ratio criterion. Expressions are derived for the expected value and variance of the array weights and output powers as a function of the fraction F and the number of snapshots used in the covariance matrix estimate. These expressions are compared with computer simulation and good agreement is found. A trade-off is found to exist between the desired level of interference suppression and the number of snapshots required in order to achieve that level with some certainty. The removal of noise eigenvectors from the covariance matrix inverse is also discussed with respect to this application. Finally, the type and severity of errors which occur in the covariance matrix estimate are characterized through simulation

Joint design for improved fatigue life of diffusion-bonded box-stiffened panels

Simple photoelastic models were used to identify a cross-section geometry that would eliminate the severe stress concentrations at the bond line between box stiffeners diffusion bonded to a panel skin. Experimental fatigue-test data from titanium test specimens quantified the allowable stress in terms of cycle life for various joint geometries. It is shown that the effect of stress concentration is reduced and an acceptable fatigue life is achieved

Operational modules for space station construction

Identification of an effective space construction concept is a current objective of NASA studies. One concept, described in this memorandum, consists of repetitive use of operational modules, which minimizes on-orbit stay time for the shuttle. A space station constructed of operational modules may benefit from fabrication and system checkout in ground-based facilities, and since the modules are the primary structure of the space station, a minimum of additional structure, and trips and on-orbit stay time of the shuttle are required

Study of an attitude control system for the astronaut maneuvering unit final report, dec. 1963 - jul. 1964

Attitude control system for astronaut maneuvering unit

An Optimal Self-Stabilizing Firing Squad

Consider a fully connected network where up to $t$ processes may crash, and all processes start in an arbitrary memory state. The self-stabilizing firing squad problem consists of eventually guaranteeing simultaneous response to an external input. This is modeled by requiring that the non-crashed processes "fire" simultaneously if some correct process received an external "GO" input, and that they only fire as a response to some process receiving such an input. This paper presents FireAlg, the first self-stabilizing firing squad algorithm. The FireAlg algorithm is optimal in two respects: (a) Once the algorithm is in a safe state, it fires in response to a GO input as fast as any other algorithm does, and (b) Starting from an arbitrary state, it converges to a safe state as fast as any other algorithm does.Comment: Shorter version to appear in SSS0

Surveyor batteries Final engineering report

Design and performance of Surveyor spacecraft silver-zinc main batter

Plume motion and large-scale circulation in a cylindrical Rayleigh-B\'enard cell

We used the time correlation of shadowgraph images to determine the angle $\Theta$ of the horizontal component of the plume velocity above (below) the center of the bottom (top) plate of a cylindrical Rayleigh-B\'enard cell of aspect ratio $\Gamma \equiv D/L = 1$ ($D$ is the diameter and $L \simeq 87$ mm the height) in the Rayleigh-number range $7\times 10^7 \leq R \leq 3\times 10^{9}$ for a Prandtl number $\sigma = 6$. We expect that $\Theta$ gives the direction of the large-scale circulation. It oscillates time-periodically. Near the top and bottom plates $\Theta(t)$ has the same frequency but is anti-correlated.Comment: 4 pages, 6 figure

Drug resistance mediating Plasmodium falciparum polymorphisms and clinical presentations of parasitaemic children in Uganda.

BackgroundPlasmodium falciparum genetic polymorphisms that mediate altered drug sensitivity may impact upon virulence. In a cross-sectional study, Ugandan children with infections mutant at pfcrt K76T, pfmdr1 N86Y, or pfmdr1 D1246Y had about one-fourth the odds of symptomatic malaria compared to those with infections with wild type (WT) sequences. However, results may have been confounded by greater likelihood in those with symptomatic disease of higher density mixed infections and/or recent prior treatment that selected for WT alleles.MethodsPolymorphisms in samples from paired episodes of asymptomatic and symptomatic parasitaemia in 114 subjects aged 4-11 years were followed longitudinally in Tororo District, Uganda. Paired episodes occurred within 3-12 months of each other and had no treatment for malaria in the prior 60 days. The prevalence of WT, mixed, and mutant alleles was determined using multiplex ligase detection reaction-fluorescent microsphere assays.ResultsConsidering paired episodes in the same subject, the odds of symptomatic malaria were lower for infections with mutant compared to WT or mixed sequence at N86Y (OR 0.26, 95% CI 0.09-0.79, p = 0.018), but not K76T or D1246Y. However, symptomatic episodes (which had higher densities) were more likely than asymptomatic to be mixed (for N86Y OR 2.0, 95% CI 1.04-4.0, p = 0.036). Excluding mixed infections, the odds of symptomatic malaria were lower for infections with mutant compared to WT sequence at N86Y (OR 0.33, 95% CI 0.11-0.98, p = 0.046), but not the other alleles. However, if mixed genotypes were grouped with mutants in this analysis or assuming that mixed infections consisted of 50% WT and 50% mutant genotypes, the odds of symptomatic infection did not differ between infections that were mutant or WT at the studied alleles.ConclusionsAlthough infections with only the mutant pfmdr1 86Y genotype were associated with symptomatic infection, this association could primarily be explained by greater parasite densities and therefore greater prevalence of mixed infections in symptomatic children. These results indicate limited association between the tested polymorphisms and risk of symptomatic disease and highlight the value of longitudinal studies for assessing associations between parasite factors and clinical outcomes

Magnetohydrodynamic Power Generation in the Laboratory Simulated Martian Entry Plasma

This paper addresses the magnetohydrodynamic (MHD) conversion of the energy released during the planetary entry phase of an interplanetary vehicle trajectory. The effect of MHD conversion is multi-fold. It reduces and redirects heat transferred to the vehicle, and regenerates the dissipated energy in reusable and transportable form. A vehicle on an interplanetary mission carries about 10,000 kWh of kinetic energy per ton of its mass. This energy is dissipated into heat during the planetary atmospheric entry phase. For instance, the kinetic energy of Mars Pathfinder was about 4220 kWh. Based on the loss in velocity, Mars Pathfinder lost about 92.5% of that energy during the plasma-sustaining entry phase that is approximately 3900 kWh. An ideal MHD generator, distributed over the probe surface of Mars Pathfinder could convert more than 2000 kWh of this energy loss into electrical energy, which correspond to more than 50% of the kinetic energy loss. That means that the heat transferred to the probe surface can be reduced by at least 50% if the converted energy is adequately stored, or re-radiated, or directly used. Therefore, MHD conversion could act not only as the power generating, but also as the cooling process. In this paper we describe results of preliminary experiments with light and microwave emitters powered by model magnetohydrodynamic generators and discuss method for direct use of converted energy

Pengembangan Model Integrasi Kano-QFD Untuk Mengoptimalkan Kepuasan Konsumen Dengan Mempertimbangkan Keterbatasan Dana Pengembangan

. This study develops a model of integration between the application of the concept of Kano in QFD framework and considering the use of product development costs. Kano concept would classify the product attributes into 5 categories: reverse, indifference, one-dimensional, must-be, dan attractive. These attributes are given different weights based on the influence of these attributes on the level of consumer satisfaction. Furthermore, the allocation process of product development by taking into account the contribution of the cost of each technical response. The result of the integration is allocate development funds for must-be attributes and do not allocate to the reverse and indifference attributes. Thus, companies avoid the development of product attributes indifference and reverse that does not give effect to increasing customer satisfaction so that it saves development costs. The results of this model are all the technical response both in the category of must-be, one-dimensional and attractive product development funds be allocated with total costs of $348,30 and the value of customer satisfaction of 89,61, whereas the model Bode and Fung (1998) make the decision to realize all technical response including technical response that does not affect satisfaction (indifference) so the total product development costs become$ 353,30