Durability of biodegradable polymers for the conservation of cultural heritage

The use of polymers for conservation of cultural heritage is related to the possibility to slow down or stop natural deterioration which, in many cases, corresponds to stopping the entrance of liquid water and to favor spontaneous water vapor removal. Unfortunately, hydrophobicity is generally favored by surface roughness and thus competitive with transparency. It is therefore important to find an optimal balance hydrophobicity, transparency and durability (especially to photooxidation). However, polymers typically used for applications in this field come from non-renewable resources and are not biodegradable. In this work, the mechanical, structural, and optical properties of PLA, PBAT, and a PBAT/PLA blends, as well as surface properties and water vapor permeability, were investigated before and after exposure to UV irradiation, in order to evaluate their durability and suitability for conservation of cultural heritage

Creep behavior of poly(lactic acid) based biocomposites

Polymer composites containing natural fibers are receiving growing attention as possible alternatives for composites containing synthetic fibers. The use of biodegradable matrices obtained from renewable sources in replacement for synthetic ones is also increasing. However, only limited information is available about the creep behavior of the obtained composites. In this work, the tensile creep behavior of PLA based composites, containing flax and jute twill weave woven fabrics, produced through compression molding, was investigated. Tensile creep tests were performed at different temperatures (i.e., 40 and 60 \ub0C). The results showed that the creep behavior of the composites is strongly influenced by the temperature and the woven fabrics used. As preliminary characterization, quasi-static tensile tests and dynamic mechanical tests were carried out on the composites. Furthermore, fabrics (both flax and jute) were tested as received by means of quasi-static tests and creep tests to evaluate the influence of fabrics mechanical behavior on the mechanical response of the resulting composites. The morphological analysis of the fracture surface of the tensile samples showed the better fiber-matrix adhesion between PLA and jute fabric

Medication-related osteonecrosis of the jaw in a cancer patient receiving lenvatinib

Medication-related osteonecrosis of the jaw (MRONJ) is an adverse drug reaction that affects the mandible and maxilla of patients exposed to bone-targeting agents such as anti-resorptive and anti-angiogenic agents. Several MRONJ cases have been reported after dental extractions in patients under treatment with anti-angiogenic agents, including receptor activator of nuclear factor κB ligand (RANKL) inhibitor, anti-vascular endothelial growth factor (anti-VEGF) monoclonal antibody, mammalian target of rapamycin (mTOR) inhibitors, and tyrosine kinase inhibitors (TKIs). The aim of this article was to describe an original case of lenvatinib-related osteonecrosis of the jaw in a patient affected by thyroid cancer. A 58-year-old man diagnosed with Hurthle cell thyroid cancer, who was undergoing treatment with lenvatinib, developed maxillary osteonecrosis after a dental extraction. No other concomitant local or systemic risk factors for MRONJ were present. With new cancer therapies applied every year, it is important to note this novel case of lenvatinib osteonecrosis of the jaw in a patient undergoing cancer treatment

Aerial LiDAR Technology in Support to Avalanches Prevention and Risk Mitigation: AN Operative Application at "colle della Maddalena" (italy)

Abstract. Snow avalanches are the result of unstable snow masses that detach from steep slopes as consequence of changes in snowpack structure. Nowadays, remote sensing technologies can improve the knowledge of avalanches phenomenon. This work focuses on the use of high point density aerial LiDAR (Light Detection And Ranging) technology as support to avalanche events prevention and risk mitigation, by presenting an operative application at Colle della Maddalena (Italy), along the road SS n. 21, nearby the French state border. The area is often involved in intense avalanche events that adversely impact on traffic and freight transport. For this reason, regional administrations will activate the Avalanche Artificial Detachment Intervention Plan (PIDAV, 2012) in order to prevent and manage the avalanche risk in the study area, also adopting artificial detachment systems. Main aim of the present work was to generate high resolution information related to geomorphological characterization (i.e. digital elevation models, slope and aspect) of avalanche sites derived from LiDAR data processing, that will help involved authorities in the management of the avalanche control plan. Digital elevation models at 0.5 m of spatial resolution were generated together with relative tridimensional models. Secondly, a preliminary investigation about capabilities and limits of LiDAR technology was done in the identification of avalanche sites only relying on geomorphological information directly derived by LiDAR data processing. Results showed that position of avalanche sites were correctly identified while no information could be obtained about the extension of the sliding area and identification of detachment areas

Design principles for the future internet architecture

Design principles play a central role in the architecture of the Internet as driving most engineering decisions at conception level and operational level. This paper is based on the EC Future Internet Architecture (FIArch) Group results and identifies some of the design principles that we expect to govern the future architecture of the Internet. We believe that it may serve as a starting point and comparison for most research and development projects that target the so-called Future Internet Architecture

Gastrointestinal Bleeding in COVID-19 Patients: A Systematic Review with Meta-Analysis

The novel coronavirus disease 2019 (COVID-19) has been reported to affect the gastrointestinal system with a variety of symptoms, including bleeding. The prevalence of bleeding in these patients remains unclear. The aim of this meta-Analysis is to estimate the rate of gastrointestinal bleeding in COVID-19 patients and its association with mortality. MEDLINE and Embase were searched through December 20, 2020. Studies reporting COVID-19 patients with and without gastrointestinal bleeding were included. Estimated prevalence with 95% confidence intervals (CI) was pooled; heterogeneity was expressed as I2. Metaregression analysis was performed to assess the impact of confounding covariates. Ten studies met the inclusion criteria and were included in the analysis. A total of 91887 COVID-19 patients were considered, of whom 534 reported gastrointestinal bleeding (0.6%) [409 (76.6%) upper and 121 (22.7%) lower gastrointestinal bleeding (UGIB and LGIB, resp.)]. The overall pooled gastrointestinal bleeding rate was 5% [95% CI 2-8], with high heterogeneity (I2 99.2%); "small study effect"was observed using the Egger test (p=0.049). After removing two outlier studies, the pooled bleeding rate was 2% [95% CI 0-4], with high heterogeneity (I2 99.2%), and no "small study effect"(p=0.257). The pooled UGIB rate was 1% (95% CI 0-3, I2 98.6%, p=0.214), whereas the pooled LGIB rate was 1% (95% CI 0-2, I2 64.7%, p=0.919). Metaregression analysis showed that overall estimates on gastrointestinal bleeding were affected by studies reporting different sources of bleeding. No significant association between gastrointestinal bleeding and mortality was found. In this meta-Analysis of published studies, individuals with COVID-19 were found to be at risk for gastrointestinal bleeding, especially upper gastrointestinal bleeding

Temporal Patterns in Perchlorate, Thiocyanate, and Iodide Excretion in Human Milk

BACKGROUND: Perchlorate and thiocyanate interfere with iodide uptake at the sodium–iodide symporter and are potential disruptors of thyroid hormone synthesis. Perchlorate is a common contaminant of water, food, and human milk. Although it is known that iodide undergoes significant diurnal variations in serum and urinary excretion, less is known about diurnal variations of milk iodide levels. OBJECTIVES: Variability in perchlorate and thiocyanate excretion in human milk has not been examined. Our objective was to determine variability of perchlorate, thiocyanate, and iodide in serially collected samples of human milk. METHODS: Ten lactating women were asked to collect six milk samples on each of 3 days. As an alternative, subjects were asked to collect as many milk samples as comfortably possible over 3 days. Samples were analyzed for perchlorate, iodide, and thiocyanate by ion chromatography coupled with mass spectrometry. RESULTS: Individual perchlorate, iodide, and thiocyanate levels varied significantly over time; there was also considerable variation among individuals. The iodide range, mean ± SD, and median for all samples (n = 108) were 3.1–334 μg/L, 87.9 ± 80.9 μg/L, and 55.2 μg/L, respectively. The range, mean ± SD, and median of perchlorate in all samples (n = 147) were 0.5–39.5 μg/L, 5.8 ± 6.2 μg/L, and 4.0 μg/L. The range, mean ± SD, and median of thiocyanate in all samples (n = 117) were 0.4 –228.3 μg/L, 35.6 ± 57.9 μg/L, and 5.6 μg/L. The data are not symmetrically distributed; the mean is higher than the median in all cases. CONCLUSIONS: Iodine intake may be inadequate in a significant fraction of this study population. Perchlorate and thiocyanate appear to be common in human milk. The role of these chemicals in reducing breast milk iodide is in need of further investigation

Development of a Health-Protective Drinking Water Level for Perchlorate

We evaluated animal and human toxicity data for perchlorate and identified reduction of thyroidal iodide uptake as the critical end point in the development of a health-protective drinking water level [also known as the public health goal (PHG)] for the chemical. This work was performed under the drinking water program of the Office of Environmental Health Hazard Assessment of the California Environmental Protection Agency. For dose–response characterization, we applied benchmark-dose modeling to human data and determined a point of departure (the 95% lower confidence limit for 5% inhibition of iodide uptake) of 0.0037 mg/kg/day. A PHG of 6 ppb was calculated by using an uncertainty factor of 10, a relative source contribution of 60%, and exposure assumptions specific to pregnant women. The California Department of Health Services will use the PHG, together with other considerations such as economic impact and engineering feasibility, to develop a California maximum contaminant level for perchlorate. We consider the PHG to be adequately protective of sensitive subpopulations, including pregnant women, their fetuses, infants, and people with hypothyroidism

Development of membranes for hydrogen separation: Pd-coated V-10Pd

Numerous Group IVB and VB alloys were prepared and tested as potential membrane materials but most of these materials were brittle or exhibited cracking during hydrogen exposure. One of the more ductile alloys, V-10Pd (at. %), was fabricated into a thin (107-{micro}m thick) composite membrane coated with 100 nm of Pd on each side. The material was tested for hydrogen permeability, resistance to hydrogen embrittlement, and long term hydrogen flux stability. The hydrogen permeability, {phi}, of the V-10Pd membrane was 3.86 x 10{sup -8} mol H{sub 2} m{sup -1} s{sup -1} Pa{sup -0.5} (avg. of three different samples) at 400 C, which is slightly higher than the permeability of Pd-23Ag at that temperature. A 1400 h hydrogen flux test at 400 C demonstrated that the rate of metallic interdiffusion was slow between the V-10Pd foil and the 100-nm-thick Pd coating on the surface. However, at the end of testing the membrane cracked at 118 C because of hydrogen embrittlement