Assessing Yield and Quality of Melon (Cucumis melo L.) Improved by Biodegradable Mulching Film

: Low-density polyethylene (LDPE) plastic mulching films have an important function, but at the end of their lifetime pose an economic and environmental problem in terms of their removal and disposal. Biodegradable mulching films represent an alternative to LDPE with the potential to avoid these environmental issues. In this preliminary study, we employed a biodegradable film based on Mater-Bi® (MB) in comparison with low-density polyethylene to assess their effect on the yield and particular quality traits (organoleptic and nutraceutical composition of the fruits) of muskmelon (cv Pregiato) grown on soils with different textures (clay-loam-CL and sandy loam-SL) in two private farms in South Italy. Soil temperature under the mulch was also measured. During the monitored periods, mean soil temperature under LDPE was higher (about 1.3 °C) than that under the biodegradable film and was higher in SL soil than in CL soil, at 25.5° and 24.2 °C, respectively. However, the biodegradable film was able to limit the daily temperature fluctuation, which was 1.7 °C in both soils compared with 2.3 °C recorded for LDPE. Fruit yields were higher with MB film than LDPE (+9.5%), irrespective of soil texture. MaterBi® also elicited increases in total soluble solids, polyphenols, flavonoids, and antioxidant activity compared with LDPE films: 13.3%, 22.4%, 27.2%, and 24.6%, respectively. Color parameters of flesh, namely brightness, chroma, and hue angle were better in fruits grown on LDPE. Our findings suggest that Mater-Bi® based biodegradable mulching film is a potentially valid alternative to traditional LDPE, particularly for obtaining the agronomical benefits outlined above and for promoting environmental sustainability due to its favourable biodegradable properties

How can we be sure that renal dysfunction after coronary angiography is just explained by contrast nephropathy?

n/

Haldane gap in the quasi one-dimensional nonlinear σ\sigma-model

This work studies the appearance of a Haldane gap in quasi one-dimensional antiferromagnets in the long wavelength limit, via the nonlinear $\sigma$-model. The mapping from the three-dimensional, integer spin Heisenberg model to the nonlinear $\sigma$-model is explained, taking into account two antiferromagnetic couplings: one along the chain axis ($J$) and one along the perpendicular planes ($J_\bot$) of a cubic lattice. An implicit equation for the Haldane gap is derived, as a function of temperature and coupling ratio $J_\bot/J$. Solutions to these equations show the existence of a critical coupling ratio beyond which a gap exists only above a transition temperature $T_N$. The cut-off dependence of these results is discussed.Comment: 14 pages (RevTeX 3.0), 3 PostScript figures appended (printing instructions included

Warming permafrost and active layer variability at Cime Bianche, Western European Alps

The objective of this paper is to provide a first synthesis on the state and recent evolution of permafrost at the monitoring site of Cime Bianche (3100 m a.s.l.) on the Italian side of the Western Alps. The analysis is based on 7 years of ground temperature observations in two boreholes and seven surface points. The analysis aims to quantify the spatial and temporal variability of ground surface temperature in relation to snow cover, the small-scale spatial variability of the active layer thickness and current temperature trends in deep permafrost.Results show that the heterogeneity of snow cover thickness, both in space and time, is the main factor controlling ground surface temperatures and leads to a mean range of spatial variability (2.5 ± 0.1 °C) which far exceeds the mean range of observed inter-annual variability (1.6 ± 0.1 °C). The active layer thickness measured in two boreholes at a distance of 30 m shows a mean difference of 2.0 ± 0.1 m with the active layer of one borehole consistently deeper. As revealed by temperature analysis and geophysical soundings, such a difference is mainly driven by the ice/water content in the sub-surface and not by the snow cover regimes. The analysis of deep temperature time series reveals that permafrost is warming. The detected trends are statistically significant starting from a depth below 8 m with warming rates between 0.1 and 0.01 °C yr⁻¹

Visual control through narrow passages for an omnidirectional wheeled robot

Robotic systems are gradually replacing human intervention in dangerous facilities to improve human safety and prevent risky situations. In this domain, our work addresses the problem of autonomous crossing narrow passages in a semi-structured (i.e., partially-known) environment. In particular, we focus on the CERN’s Super Proton Synchrotron particle accelerator, where a mobile robot platform is equipped with a lightweight arm to perform measurements, inspection, and maintenance operations. The proposed approach leverages an image-based visual servoing strategy that exploits computer vision to detect and track known geometries defining narrow passage gates. The effectiveness of the proposed approach has been demonstrated in a realistic mock-up

USE OF UAS IN A HIGH MOUNTAIN LANDSCAPE: THE CASE OF GRAN SOMMETTA ROCK GLACIER (AO)

Photogrammetry has been used since long time to periodically control the evolution of landslides, either from aerial images as well as from ground. Landslides control and monitoring systems face a large variety of cases and situations: in hardly accessible environments, like glacial areas and high mountain locations, it is not simple finding a survey method and a measurement control system, which are capable to reliably assess, with low costs, the expected displacement and its accuracy. For this reason, the behaviour of these events presents the geologists and the surveyor each time with different challenges. The use of UAS (Unmanned Aerial System) represents, in this context, a recent and valid option to perform the data acquisition both in safety and quickly, avoiding hazards and risks for the operators while at the same time containing the costs. The paper presents an innovative monitoring system based on UAS-photogrammetry, GNSS survey and DSM change detection techniques to evaluate the Gran Sommetta rock glacier surface movements over the period 2012-2014. Since 2012, the surface movements of the glacier are monitored by ARPAVdA (a regional environmental protection agency) as a case study for the impact of climate change on high-mountain infrastructures. In such scenarios, in fact, a low-cost monitoring activity can provide important data to improve our knowledge about glacier dynamics connected to climate changes and to prevent risks in anthropic Alps areas. To evaluate the displacements of the rock glacier different techniques were proposed: the most reliable uses the orthophoto of the area and rely on a manual identification of corresponding features performed by a trained operator. To further limit the costs and improve the density of displacement information two automatic procedures were developed as well

Surface Functionalisation of biomaterials with alkaline phosphatase

Two different glasses, one biocompatible but with a low bioactivity index (G1) and the other with an higher bioactivity index (G2), the ceramic version of the second glass and a titanium alloy (Ti6Al4V) have been functionalizated by anchoring alkaline phosphatase (ALP) on their surfaces. The enzyme has been chosen because it is involved in mineralization processes of hard tissues and is a model for more complex ones. ALP has been grafted on glasses and glass-ceramics surfaces both with and without samples silanization and on metallic surfaces with and without tresyl chloride activation. Samples have been analyzed at each step of the functionalization process in order to verify it