The Exposed Surface Area To Volume Ratio: Is Shell More Efficient Than Limestone In Promoting Oyster Recruitment?

Planting oyster cultch is a common management approach used to enhance recruitment. The two most popular cultch materials are shell and limestone. Both are sold by volume or weight; however, once deposited on oyster grounds, only a small portion of the total surface area of each particle is available for recruitment. Shell and limestone have different surface area to volume properties, and thus provide differential settlement opportunities. Exposed surface area to volume (expSA/V) ratios of oyster shell and limestone fragments were compared, as an indicator of their recruitment potential and cost-effectiveness for cultch planting. Samples were collected from the Primary Public Oyster Seed Grounds in Louisiana by vibracore, and from the Pass Christian Tonging Grounds in Mississippi by dredge. Shell (including whole shell and fragments) and limestone particles greater than or equal to 8 mm by geometric shape were classified and their expSA/V was calculated. Mean expSA/V ratios of shell were approximately three to nine times higher than limestone. For limestone of similar particle size to provide an equivalent recruitment benefit for the same cost would require that the cost of purchase, transport, and planting be three to nine times lower than shell. Thus, shell is likely to be a more efficient material than limestone for recruitment enhancement. Nevertheless, the higher variability in expSA/V of shell and other factors such as the expected lifetime and the relative performance of small and large particles of materials should also be considered. Analysis of a Louisiana limestone plant and associated oyster cultch showed that the proportion of small and large limestone particles and the relative proportion of whole shells and fragments can greatly alter expSA/V. In this case, the a priori expectation that oyster shell would outperform limestone did not materialize because of the quantity of small limestone particles of favorable shapes in the deployed material. Even so, as yet unknown is the possible reduction in performance in situ of smaller particles that might occur if they increase the one-dimensionality of the plant

Development and Validation of an Index Based on EAT-Lancet Recommendations: The Planetary Health Diet Index

The EAT-Lancet Commission has proposed a planetary health diet. We propose the development of the Planetary Health Diet Index (PHDI) based on this proposed reference diet. We used baseline dietary data obtained through a 114-item FFQ from 14, 779 participants of the Longitudinal Study on Adult Health, a multicenter cohort study conducted in Brazil. The PHDI has 16 components and a score from 0 to 150 points. Validation and reliability analyses were performed, including principal component analyses, association with selected nutrients, differences in means between groups (for example, smokers vs. non-smokers), correlations between components and total energy intake, Cronbach''s alpha, item-item correlations, and linear regression analysis between PHDI with carbon footprint and overall dietary quality. The mean PHDI was 60.4 (95% CI 60.2:60.5). The PHDI had six dimensions, was associated in an expected direction with the selected nutrients and was significantly (p < 0.001) lower in smokers (59.0) than in non-smokers (60.6). Cronbach''s alpha value was 0.51. All correlations between components were low, as well as between components and PHDI with total energy intake. After adjustment for age and sex, the PHDI score remained associated (p < 0.001) with a higher overall dietary quality and lower carbon footprint. Thus, we confirmed the PHDI validity and reliability

Synthesis and interaction of terminal unsaturated chemical probes with Mycobacterium tuberculosis CYP124A1

A series of C15–C20 isoprenyl derivatives bearing terminal alkenyl and alkynyl groups were synthesized as possible substrates of the methyl-branched lipid ω-hydroxylase CYP124A1 from Mycobacterium tuberculosis. The interactions of each compound with the enzyme active site were characterized using UV–vis spectroscopy. We found that C10 and C15 analogs bind with similar affinity to the corresponding parent C10 and C15 substrates geraniol and farnesol, respectively. Three analogs (C10-ω-ene, C10-ω-yne, C15-ω-yne) interact with the proximal side of the heme iron by coordinating to the oxygen atom of the ferric heme, as judged by the appearance of typical Type-IA binding spectra. On the other hand, the C15-ω-ene analog interacts with the ferric heme by displacing the bound water that generates a typical Type I binding spectrum. We were unable to detect P450-mediated oxidation of these probes following extended incubations with CYP124A1 in our reconstituted assay system, whereas a control reaction containing farnesol was converted to ω-hydroxy farnesol under the same conditions. To understand the lack of detectable oxidation, we explored the possibility that the analogs were acting as mechanism-based inhibitors, but we were unable to detect time-dependent loss of enzymatic activity. In order to gain insight into the lack of detectable turnover or time-dependent inhibition, we examined the interaction of each compound with the CYP124A1 active site using molecular docking simulations. The docking studies revealed a binding mode where the terminal unsaturated functional groups were sequestered within the methyl-binding pocket, rather than positioned close to the heme iron for oxidation. These results aid in the design of specific inhibitors of Mtb-CYP124A1, an interesting enzyme that is implicated in the oxidation of methyl-branched lipids, including cholesterol, within a deadly human pathogen

A Universal Model of Global Civil Unrest

Civil unrest is a powerful form of collective human dynamics, which has led to major transitions of societies in modern history. The study of collective human dynamics, including collective aggression, has been the focus of much discussion in the context of modeling and identification of universal patterns of behavior. In contrast, the possibility that civil unrest activities, across countries and over long time periods, are governed by universal mechanisms has not been explored. Here, we analyze records of civil unrest of 170 countries during the period 1919-2008. We demonstrate that the distributions of the number of unrest events per year are robustly reproduced by a nonlinear, spatially extended dynamical model, which reflects the spread of civil disorder between geographic regions connected through social and communication networks. The results also expose the similarity between global social instability and the dynamics of natural hazards and epidemics.Comment: 8 pages, 3 figure

A Unifying Theory of Biological Function

A new theory that naturalizes biological function is explained and compared with earlier etiological and causal role theories. Etiological theories explain functions from how they are caused over their evolutionary history. Causal role theories analyze how functional mechanisms serve the current capacities of their containing system. The new proposal unifies the key notions of both kinds of theories, but goes beyond them by explaining how functions in an organism can exist as factors with autonomous causal efficacy. The goal-directedness and normativity of functions exist in this strict sense as well. The theory depends on an internal physiological or neural process that mimics an organism’s fitness, and modulates the organism’s variability accordingly. The structure of the internal process can be subdivided into subprocesses that monitor specific functions in an organism. The theory matches well with each intuition on a previously published list of intuited ideas about biological functions, including intuitions that have posed difficulties for other theories

Percentile reference values for anthropometric body composition indices in European children from the IDEFICS study

INTRODUCTION: To characterise the nutritional status in children with obesity or wasting conditions, European anthropometric reference values for body composition measures beyond the body mass index (BMI) are needed. Differentiated assessment of body composition in children has long been hampered by the lack of appropriate references. OBJECTIVES: The aim of our study is to provide percentiles for body composition indices in normal weight European children, based on the IDEFICS cohort (Identification and prevention of Dietary-and lifestyle-induced health Effects in Children and infantS). METHODS: Overall 18 745 2.0-10.9-year-old children from eight countries participated in the study. Children classified as overweight/obese or underweight according to IOTF (N = 5915) were excluded from the analysis. Anthropometric measurements (BMI (N = 12 830); triceps, subscapular, fat mass and fat mass index (N = 11 845-11 901); biceps, suprailiac skinfolds, sum of skinfolds calculated from skinfold thicknesses (N = 8129-8205), neck circumference (N = 12 241); waist circumference and waist-to-height ratio (N = 12 381)) were analysed stratified by sex and smoothed 1st, 3rd, 10th, 25th, 50th, 75th, 90th, 97th and 99th percentile curves were calculated using GAMLSS. RESULTS: Percentile values of the most important anthropometric measures related to the degree of adiposity are depicted for European girls and boys. Age-and sex-specific differences were investigated for all measures. As an example, the 50th and 99th percentile values of waist circumference ranged from 50.7-59.2 cm and from 51.3-58.7 cm in 4.5-to < 5.0-year-old girls and boys, respectively, to 60.6-74.5 cm in girls and to 59.9-76.7 cm in boys at the age of 10.5-10.9 years. CONCLUSION: The presented percentile curves may aid a differentiated assessment of total and abdominal adiposity in European children

Sparse Matrix-Based HPC Tomography

Tomographic imaging has benefited from advances in X-ray sources, detectors and optics to enable novel observations in science, engineering and medicine. These advances have come with a dramatic increase of input data in the form of faster frame rates, larger fields of view or higher resolution, so high performance solutions are currently widely used for analysis. Tomographic instruments can vary significantly from one to another, including the hardware employed for reconstruction: from single CPU workstations to large scale hybrid CPU/GPU supercomputers. Flexibility on the software interfaces and reconstruction engines are also highly valued to allow for easy development and prototyping. This paper presents a novel software framework for tomographic analysis that tackles all aforementioned requirements. The proposed solution capitalizes on the increased performance of sparse matrix-vector multiplication and exploits multi-CPU and GPU reconstruction over MPI. The solution is implemented in Python and relies on CuPy for fast GPU operators and CUDA kernel integration, and on SciPy for CPU sparse matrix computation. As opposed to previous tomography solutions that are tailor-made for specific use cases or hardware, the proposed software is designed to provide flexible, portable and high-performance operators that can be used for continuous integration at different production environments, but also for prototyping new experimental settings or for algorithmic development. The experimental results demonstrate how our implementation can even outperform state-of-the-art software packages used at advanced X-ray sources worldwide

Integrated multiple mediation analysis: A robustness–specificity trade-off in causal structure

Recent methodological developments in causal mediation analysis have addressed several issues regarding multiple mediators. However, these developed methods differ in their definitions of causal parameters, assumptions for identification, and interpretations of causal effects, making it unclear which method ought to be selected when investigating a given causal effect. Thus, in this study, we construct an integrated framework, which unifies all existing methodologies, as a standard for mediation analysis with multiple mediators. To clarify the relationship between existing methods, we propose four strategies for effect decomposition: two-way, partially forward, partially backward, and complete decompositions. This study reveals how the direct and indirect effects of each strategy are explicitly and correctly interpreted as path-specific effects under different causal mediation structures. In the integrated framework, we further verify the utility of the interventional analogues of direct and indirect effects, especially when natural direct and indirect effects cannot be identified or when cross-world exchangeability is invalid. Consequently, this study yields a robustness–specificity trade-off in the choice of strategies. Inverse probability weighting is considered for estimation. The four strategies are further applied to a simulation study for performance evaluation and for analyzing the Risk Evaluation of Viral Load Elevation and Associated Liver Disease/Cancer data set from Taiwan to investigate the causal effect of hepatitis C virus infection on mortality

Stress relaxation and creep experiments with the atomic force microscope: a unified method to calculate elastic moduli and viscosities of biomaterials (and cells)

We show that the atomic force microscope can perform stress relaxation and creep compliance measurements on living cells. We propose a method to obtain the mechanical properties of the studied biomaterial: the relaxation time, the elastic moduli and the viscosity.Comment: 17 pages, three figure