219 research outputs found
Leveraging mathematical models of disease dynamics and machine learning to improve development of novel malaria interventions
BACKGROUND: Substantial research is underway to develop next-generation interventions that address current malaria control challenges. As there is limited testing in their early development, it is difficult to predefine intervention properties such as efficacy that achieve target health goals, and therefore challenging to prioritize selection of novel candidate interventions. Here, we present a quantitative approach to guide intervention development using mathematical models of malaria dynamics coupled with machine learning. Our analysis identifies requirements of efficacy, coverage, and duration of effect for five novel malaria interventions to achieve targeted reductions in malaria prevalence. METHODS: A mathematical model of malaria transmission dynamics is used to simulate deployment and predict potential impact of new malaria interventions by considering operational, health-system, population, and disease characteristics. Our method relies on consultation with product development stakeholders to define the putative space of novel intervention specifications. We couple the disease model with machine learning to search this multi-dimensional space and efficiently identify optimal intervention properties that achieve specified health goals. RESULTS: We apply our approach to five malaria interventions under development. Aiming for malaria prevalence reduction, we identify and quantify key determinants of intervention impact along with their minimal properties required to achieve the desired health goals. While coverage is generally identified as the largest driver of impact, higher efficacy, longer protection duration or multiple deployments per year are needed to increase prevalence reduction. We show that interventions on multiple parasite or vector targets, as well as combinations the new interventions with drug treatment, lead to significant burden reductions and lower efficacy or duration requirements. CONCLUSIONS: Our approach uses disease dynamic models and machine learning to support decision-making and resource investment, facilitating development of new malaria interventions. By evaluating the intervention capabilities in relation to the targeted health goal, our analysis allows prioritization of interventions and of their specifications from an early stage in development, and subsequent investments to be channeled cost-effectively towards impact maximization. This study highlights the role of mathematical models to support intervention development. Although we focus on five malaria interventions, the analysis is generalizable to other new malaria interventions
Relationships among HIV infection, metabolic risk factors, and left ventricular structure and function
Our objective was to determine if the presence of metabolic complications (MC) conveyed an additional risk for left ventricular (LV) dysfunction in people with HIV. HIV(+) and HIV(−) men and women were categorized into four groups: (1) HIV(+) with MC (43±7 years, n=64), (2) HIV(+) without MC (42±7 years, n=59), (3) HIV(−) with MC (44±8 years, n=37), or (4) HIV(−) controls without MC (42±8 years, n=41). All participants underwent two-dimensional (2-D), Doppler, and tissue Doppler echocardiography. Overall, the prevalence of systolic dysfunction (15 vs. 4%, p=0.02) and LV hypertrophy (9 vs. 1%, p=0.03) was greater in HIV(+) than in HIV(−) participants. Participants with MC had a greater prevalence of LV hypertrophy (10% vs. 1%). Early mitral annular velocity during diastole was significantly (p<0.005) lower in groups with MC (HIV(+)/MC(+): 11.6±2.3, HIV(−)/MC(+): 12.0±2.3 vs. HIV(+)/MC(−): 12.4±2.3, HIV(−)/MC(−): 13.1±2.4 cm/s) and tended to be lower in groups with HIV (p=0.10). However, there was no interaction effect of HIV and MC for any systolic or diastolic variable. Regardless of HIV status, participants with MC had reduced LV diastolic function. Although both the presence of MC and HIV infection were associated with lower diastolic function, there was no additive negative effect of HIV on diastolic function beyond the effect of MC. Also, HIV was independently associated with lower systolic function. Clinical monitoring of LV function in individuals with metabolic risk factors, regardless of HIV status, is warranted
Patient-reported outcomes of serum eye drops manufactured from Australian blood donations and packaged using Meise vials
IntroductionSerum eye drops (SED) are an effective treatment for dry eye syndrome. However, autologous serum collection can have challenges. Patient-tailored (allogeneic) SED (PT-SED) can be made from healthy blood donors. Australian Red Cross Lifeblood has manufactured both autologous SED (Auto-SED) and PT-SED and, in May 2021, introduced Meise vial packaging. This study aimed to explore SED patient-reported outcomes and vial packaging satisfaction.MethodsA prospective cohort study was conducted with recruitment between 1 November 2021 and 30 June 2022. Participants completed the dry eye questionnaire (DEQ5), health-related quality-of-life (SF-8™), functional assessment of chronic illness therapy-treatment satisfaction-general (FACIT-TS-G), and general wellbeing surveys. Existing patients completed these once, and new patients were surveyed at baseline, 3 months post-treatment, and 6 months post-treatment.ResultsParticipants who completed all study requirements were 24 existing and 40 new Auto-SED and 10 existing and 8 new PT-SED patients. Auto-SED patients were younger [56.2 (±14.7) years] than PT-SED patients [71.4 (±10.0) years]. Participants used a mean of 1.8 (±1.1) SED, 5.3 (±2.9) times per day. In new patients, DEQ5 scores improved within 6 months from 14.0 (±2.9) to 10.6 (±3.4) for Auto-SED and from 12.9 (±3.7) to 11.4 (±2.8) for PT-SED. General wellbeing measures improved in the new Auto-SED from 7.0 (±1.9) to 7.8 (±1.7) but were reduced for new PT-SED from 6.7 (±2.9) to 6.1 (±2.9).DiscussionSED improved dry eye symptoms in most patients, regardless of the serum source. Patients using PT-SED showed decreases in some quality-of-life measures; however, recruitment was reduced due to operational constraints, and concurrent comorbidities were not assessed. General feedback for SED and vial packaging was positive, with some improvements identified
Recommended from our members
Mold-filling experiments for validation of modeling encapsulation. Part 1, "wine glass" mold.
The C6 project 'Encapsulation Processes' has been designed to obtain experimental measurements for discovery of phenomena critical to improving these processes, as well as data required in the verification and validation plan (Rao et al. 2001) for model validation of flow in progressively complex geometries. We have observed and recorded the flow of clear, Newtonian liquids and opaque, rheologically complex suspensions in two mold geometries. The first geometry is a simple wineglass geometry in a cylinder and is reported here in Part 1. The results in a more realistic encapsulation geometry are reported in Part 2
Maternal protein-energy malnutrition during early pregnancy in sheep impacts the fetal ornithine cycle to reduce fetal kidney microvascular development
This paper identifies a common nutritional pathway relating maternal through to fetal protein-energy malnutrition (PEM) and compromised fetal kidney development. Thirty-one twin-bearing sheep were fed either a control (n=15) or low-protein diet (n=16, 17 vs. 8.7 g crude protein/MJ metabolizable energy) from d 0 to 65 gestation (term, ∼ 145 d). Effects on the maternal and fetal nutritional environment were characterized by sampling blood and amniotic fluid. Kidney development was characterized by histology, immunohistochemistry, vascular corrosion casts, and molecular biology. PEM had little measureable effect on maternal and fetal macronutrient balance (glucose, total protein, total amino acids, and lactate were unaffected) or on fetal growth. PEM decreased maternal and fetal urea concentration, which blunted fetal ornithine availability and affected fetal hepatic polyamine production. For the first time in a large animal model, we associated these nutritional effects with reduced micro- but not macrovascular development in the fetal kidney. Maternal PEM specifically impacts the fetal ornithine cycle, affecting cellular polyamine metabolism and microvascular development of the fetal kidney, effects that likely underpin programming of kidney development and function by a maternal low protein diet
Recommended from our members
Modeling injection molding of net-shape active ceramic components.
To reduce costs and hazardous wastes associated with the production of lead-based active ceramic components, an injection molding process is being investigated to replace the current machining process. Here, lead zirconate titanate (PZT) ceramic particles are suspended in a thermoplastic resin and are injected into a mold and allowed to cool. The part is then bisque fired and sintered to complete the densification process. To help design this new process we use a finite element model to describe the injection molding of the ceramic paste. Flow solutions are obtained using a coupled, finite-element based, Newton-Raphson numerical method based on the GOMA/ARIA suite of Sandia flow solvers. The evolution of the free surface is solved with an advanced level set algorithm. This approach incorporates novel methods for representing surface tension and wetting forces that affect the evolution of the free surface. Thermal, rheological, and wetting properties of the PZT paste are measured for use as input to the model. The viscosity of the PZT is highly dependent both on temperature and shear rate. One challenge in modeling the injection process is coming up with appropriate constitutive equations that capture relevant phenomenology without being too computationally complex. For this reason we model the material as a Carreau fluid and a WLF temperature dependence. Two-dimensional (2D) modeling is performed to explore the effects of the shear in isothermal conditions. Results indicate that very low viscosity regions exist near walls and that these results look similar in terms of meniscus shape and fill times to a simple Newtonian constitutive equation at the shear-thinned viscosity for the paste. These results allow us to pick a representative viscosity to use in fully three-dimensional (3D) simulation, which because of numerical complexities are restricted to using a Newtonian constitutive equation. Further 2D modeling at nonisothermal conditions shows that the choice of representative Newtonian viscosity is dependent on the amount of heating of the initially room temperature mold. An early 3D transient model shows that the initial design of the distributor is sub-optimal. However, these simulations take several months to run on 4 processors of an HP workstation using a preconditioner/solver combination of ILUT/GMRES with fill factors of 3 and PSPG stabilization. Therefore, several modifications to the distributor geometry and orientations of the vents and molds have been investigated using much faster 3D steady-state simulations. The pressure distribution for these steady-state calculations is examined for three different distributor designs to see if this can indicate which geometry has the superior design. The second modification, with a longer distributor, is shown to have flatter, more monotonic isobars perpendicular to the flow direction indicating a better filling process. The effects of the distributor modifications, as well as effects of the mold orientation, have also been examined with laboratory experiments in which the flow of a viscous Newtonian oil entering transparent molds is recorded visually. Here, the flow front is flatter and voids are reduced for the second geometry compared to the original geometry. A horizontal orientation, as opposed to the planned vertical orientation, results in fewer voids. Recently, the Navier-Stokes equations have been stabilized with the Dohrman-Bochev PSPP stabilization method, allowing us to calculate transient 3D simulations with computational times on the order of days instead of months. Validation simulations are performed and compared to the experiments. Many of the trends of the experiments are captured by the level set modeling, though quantitative agreement is lacking mainly due to the high value of the gas phase viscosity necessary for numerical stability, though physically unrealistic. More correct trends are predicted for the vertical model than the horizontal model, which is serendipitous as the actual mold is held in a vertical geometry. The full, transient mold filling calculations indicate that the flow front is flatter and voids may be reduced for the second geometry compared to the original geometry. The validated model is used to predict mold filling for the actual process with the material properties for the PZT paste, the original distributor geometry, and the mold in a vertical orientation. This calculation shows that voids may be trapped at the four corners of the mold opposite the distributor
Comparison of Bone and Renal Effects In HIV-infected Adults Switching to Abacavir or Tenofovir Based Therapy in a Randomized Trial
Our objective was to compare the bone and renal effects among HIV-infected patients randomized to abacavir or tenofovir-based combination anti-retroviral therapy.In an open-label randomized trial, HIV-infected patients were randomized to switch from zidovudine/lamivudine (AZT/3TC) to abacavir/lamivudine (ABC/3TC) or tenofovir/emtricitabine (TDF/FTC). We measured bone mass density (BMD) and bone turnover biomarkers (osteocalcin, osteocalcin, procollagen type 1 N-terminal propeptide (P1NP), alkaline phosphatase, type I collagen cross-linked C-telopeptide (CTx), and osteoprotegerin). We assessed renal function by estimated creatinine clearance, plasma cystatin C, and urinary levels of creatinine, albumin, cystatin C, and neutrophil gelatinase-associated lipocalin (NGAL). The changes from baseline in BMD and renal and bone biomarkers were compared across study arms.Of 40 included patients, 35 completed 48 weeks of randomized therapy and follow up. BMD was measured in 33, 26, and 27 patients at baseline, week 24, and week 48, respectively. In TDF/FTC-treated patients we observed significant reductions from baseline in hip and lumbar spine BMD at week 24 (-1.8% and -2.5%) and week 48 (-2.1% and -2.1%), whereas BMD was stable in patients in the ABC/3TC arm. The changes from baseline in BMD were significantly different between study arms. All bone turnover biomarkers except osteoprotegerin increased in the TDF/FTC arm compared with the ABC/3TC arm, but early changes did not predict subsequent loss of BMD. Renal function parameters were similar between study arms although a small increase in NGAL was detected among TDF-treated patients.Switching to TDF/FTC-based therapy led to decreases in BMD and increases in bone turnover markers compared with ABC/3TC-based treatment. No major difference in renal function was observed.Clinicaltrials.gov NCT00647244
Recommended from our members
Experiments for foam model development and validation.
A series of experiments has been performed to allow observation of the foaming process and the collection of temperature, rise rate, and microstructural data. Microfocus video is used in conjunction with particle image velocimetry (PIV) to elucidate the boundary condition at the wall. Rheology, reaction kinetics and density measurements complement the flow visualization. X-ray computed tomography (CT) is used to examine the cured foams to determine density gradients. These data provide input to a continuum level finite element model of the blowing process
Recommended from our members
Wetting and free surface flow modeling for potting and encapsulation.
As part of an effort to reduce costs and improve quality control in encapsulation and potting processes the Technology Initiative Project ''Defect Free Manufacturing and Assembly'' has completed a computational modeling study of flows representative of those seen in these processes. Flow solutions are obtained using a coupled, finite-element-based, numerical method based on the GOMA/ARIA suite of Sandia flow solvers. The evolution of the free surface is solved with an advanced level set algorithm. This approach incorporates novel methods for representing surface tension and wetting forces that affect the evolution of the free surface. In addition, two commercially available codes, ProCAST and MOLDFLOW, are also used on geometries representing encapsulation processes at the Kansas City Plant. Visual observations of the flow in several geometries are recorded in the laboratory and compared to the models. Wetting properties for the materials in these experiments are measured using a unique flowthrough goniometer
- …