State transition and electrocaloric effect of BaZrx_{x}Ti1−x_{1-x}O3_3: simulation and experiment

The electrocaloric effect (ECE) of BaZr$_{x}$Ti$_{1-x}$O$_3$ (BZT) is closely related to the relaxor state transition of the materials. This work presents a systematic study on the ECE and the state transition of the BZT, using a combined canonical and microcanonical Monte Carlo simulations based a lattice-based on a Ginzburg-Landau-type Hamiltonian. For comparison and verification, experimental measurements have been carried on BTO and BZT ($x=0.12$ and $0.2$) samples, including the ECE at various temperatures, domain patterns by Piezoresponse Force Microscopy at room temperature, and the P-E loops at various temperatures. Results show that the dependency of BZT behavior of the Zr-concentration can be classified into three different stages. In the composition range of $0 \leq x \leq 0.2$, ferroelectric domains are visible, but ECE peak drops with increasing Zr-concentration harshly. In the range of $0.3 \leq x \leq 0.7$, relaxor features become prominent, and the decrease of ECE with Zr-concentration is moderate. In the high concentration range of $x \geq 0.8$, the material is almost nonpolar, and there is no ECE peak visible. Results suggest that BZT with certain low range of Zr-concentration around $x=0.12 \sim 0.3$ can be a good candidate with relatively high ECE and simutaneously wide temperature application range at rather low temperature

Itching in Patients with Chronic Hand Eczema: Data from the CARPE Registry

Background: Itching is a leading symptom of chronic hand eczema (CHE) having a great impact on patients. The determinants of itching in CHE are unclear. Objective: We performed a cross-sectional analysis investigating factors associated with the presence and severity of itch in CHE patients from the CARPE registry. Methods: We present baseline data on itch in relationship with sociodemographic factors, severity of CHE, atopy, contact allergy, treatment and patient- reported outcomes including health-related quality of life (HRQoL). Results: Of 1,051 patients with CHE, 78.1% reported itching. Significant positive associations with itching were observed for younger age groups (17-25 and 26-45 years), for moderate, severe and very severe CHE and for small/moderate impairment in HRQoL. Atopic skin diathesis, hardly being able to realize treatment recommendations and very or extremely large impairments in HRQoL were associated with itch severity. Conclusion: Taking the identified variables into account may help identify vulnerable groups most affected by (severe) itch

Hyperoxemia and excess oxygen use in early acute respiratory distress syndrome : Insights from the LUNG SAFE study

Publisher Copyright: © 2020 The Author(s). Copyright: Copyright 2020 Elsevier B.V., All rights reserved.Background: Concerns exist regarding the prevalence and impact of unnecessary oxygen use in patients with acute respiratory distress syndrome (ARDS). We examined this issue in patients with ARDS enrolled in the Large observational study to UNderstand the Global impact of Severe Acute respiratory FailurE (LUNG SAFE) study. Methods: In this secondary analysis of the LUNG SAFE study, we wished to determine the prevalence and the outcomes associated with hyperoxemia on day 1, sustained hyperoxemia, and excessive oxygen use in patients with early ARDS. Patients who fulfilled criteria of ARDS on day 1 and day 2 of acute hypoxemic respiratory failure were categorized based on the presence of hyperoxemia (PaO2 > 100 mmHg) on day 1, sustained (i.e., present on day 1 and day 2) hyperoxemia, or excessive oxygen use (FIO2 ≥ 0.60 during hyperoxemia). Results: Of 2005 patients that met the inclusion criteria, 131 (6.5%) were hypoxemic (PaO2 < 55 mmHg), 607 (30%) had hyperoxemia on day 1, and 250 (12%) had sustained hyperoxemia. Excess FIO2 use occurred in 400 (66%) out of 607 patients with hyperoxemia. Excess FIO2 use decreased from day 1 to day 2 of ARDS, with most hyperoxemic patients on day 2 receiving relatively low FIO2. Multivariate analyses found no independent relationship between day 1 hyperoxemia, sustained hyperoxemia, or excess FIO2 use and adverse clinical outcomes. Mortality was 42% in patients with excess FIO2 use, compared to 39% in a propensity-matched sample of normoxemic (PaO2 55-100 mmHg) patients (P = 0.47). Conclusions: Hyperoxemia and excess oxygen use are both prevalent in early ARDS but are most often non-sustained. No relationship was found between hyperoxemia or excessive oxygen use and patient outcome in this cohort. Trial registration: LUNG-SAFE is registered with ClinicalTrials.gov, NCT02010073publishersversionPeer reviewe

A Solve-RD ClinVar-based reanalysis of 1522 index cases from ERN-ITHACA reveals common pitfalls and misinterpretations in exome sequencing

Purpose Within the Solve-RD project (https://solve-rd.eu/), the European Reference Network for Intellectual disability, TeleHealth, Autism and Congenital Anomalies aimed to investigate whether a reanalysis of exomes from unsolved cases based on ClinVar annotations could establish additional diagnoses. We present the results of the “ClinVar low-hanging fruit” reanalysis, reasons for the failure of previous analyses, and lessons learned. Methods Data from the first 3576 exomes (1522 probands and 2054 relatives) collected from European Reference Network for Intellectual disability, TeleHealth, Autism and Congenital Anomalies was reanalyzed by the Solve-RD consortium by evaluating for the presence of single-nucleotide variant, and small insertions and deletions already reported as (likely) pathogenic in ClinVar. Variants were filtered according to frequency, genotype, and mode of inheritance and reinterpreted. Results We identified causal variants in 59 cases (3.9%), 50 of them also raised by other approaches and 9 leading to new diagnoses, highlighting interpretation challenges: variants in genes not known to be involved in human disease at the time of the first analysis, misleading genotypes, or variants undetected by local pipelines (variants in off-target regions, low quality filters, low allelic balance, or high frequency). Conclusion The “ClinVar low-hanging fruit” analysis represents an effective, fast, and easy approach to recover causal variants from exome sequencing data, herewith contributing to the reduction of the diagnostic deadlock

Curvularia Haloperoxidase: Antimicrobial Activity and Potential Application as a Surface Disinfectant

A presumed antimicrobial enzyme system, the Curvularia haloperoxidase system, was examined with the aim of evaluating its potential as a sanitizing agent. In the presence of hydrogen peroxide, Curvularia haloperoxidase facilitates the oxidation of halides, such as chloride, bromide, and iodide, to antimicrobial compounds. The Curvularia haloperoxidase system caused several-log-unit reductions in counts of bacteria (Pseudomonas spp., Escherichia coli, Serratia marcescens, Aeromonas salmonicida, Shewanella putrefaciens, Staphylococcus epidermidis, and Listeria monocytogenes), yeasts (Candida sp. and Rhodotorula sp.), and filamentous fungi (Aspergillus niger, Aspergillus tubigensis, Aspergillus versicolor, Fusarium oxysporum, Penicillium chrysogenum, and Penicillium paxilli) cultured in suspension. Also, bacteria adhering to the surfaces of contact lenses were killed. The numbers of S. marcescens and S. epidermidis cells adhering to contact lenses were reduced from 4.0 and 4.9 log CFU to 1.2 and 2.7 log CFU, respectively, after treatment with the Curvularia haloperoxidase system. The killing effect of the Curvularia haloperoxidase system was rapid, and 10(6) CFU of E. coli cells/ml were eliminated within 10 min of treatment. Furthermore, the antimicrobial effect was short lived, causing no antibacterial effect against E. coli 10 min after the system was mixed. Bovine serum albumin (1%) and alginate (1%) inhibited the antimicrobial activity of the Curvularia haloperoxidase system, whereas glucose and Tween 20 did not affect its activity. In conclusion, the Curvularia haloperoxidase system is an effective sanitizing system and has the potential for a vast range of applications, for instance, for disinfection of contact lenses or medical devices

Lipopeptide production in Pseudomonas sp strain DSS73 is regulated by components of sugar beet seed exudate via the gac two-component regulatory system

Pseudomonas sp. strain DSS73 isolated from the sugar beet rhizosphere produces the cyclic lipopeptide amphisin, which inhibits the growth of plant-pathogenic fungi. By Tn5::luxAB mutagenesis, we obtained two nonproducing mutant strains, DSS73-15C2 and DSS73-12H8. The gene interrupted by the transposon in strain DSS73-15C2 (amsY) encoded a protein with homology to peptide synthetases that was designated amphisin synthetase. DSS73-12H8 carried the transposon in a regulatory gene encoding a protein with homology to the sensor kinase GacS. Growth of strain DSS73-15C2 (amsY) was impaired during the transition to stationary phase in a minimal medium amended with an exudate of sugar beet seeds. This growth phenotype could be complemented by purified amphisin. Seed exudate further induced expression of bioluminescence from the amsY::luxAB reporter during the transition to stationary phase. This agreed with an increase in amphisin production by the DSS73 wild-type strain during early stationary phase. Amphisin synthesis in DSS73 was strictly dependent on GacS, and even induction by seed exudate depended on a functional gacS locus. Hence, a signal triggering the GacS/GacA two-component system appeared to be present in the seed exudate

Comparison of direct electrocaloric characterization methods exemplified by 0.92 Pb(Mg_1/3Nb_2/3)O₃-0.08 PbTiO₃ multilayer ceramics

Abstract Electrocaloric device structures have been developed as multilayer ceramics (MLCs) based on fundamental research carried out on PMN-8PT bulk ceramics. Two different MLC structures were prepared with nine layers each and layer thicknesses of 86 μm and 39 μm. The influence of the device design on its properties has been characterized by microstructural, dielectric, ferroelectric, and direct electrocaloric measurement. For direct characterization two different methods, ie temperature reading (thermistor and thermocouple) and heat flow measurement (differential scanning calorimetry), were used. A comparison of results revealed a highly satisfactory agreement between the different methods. This study confirms that MLCs are promising candidates for implementation into energy-efficient electrocaloric cooling systems providing large refrigerant volume and high electrocaloric effect. Due to their micron-sized active layers, they allow for the application of high electric fields under low operation voltages. We measured a maximum electrocaloric temperature change of ΔT = 2.67 K under application/withdrawal of an electric field of ΔE = 16 kV mm⁻¹, which corresponds to operation voltages below 1.5 kV