842 research outputs found
ENCORE AND PIXIE, TWO LATE-SEASON MANDARIN HYBRIDS IN PUERTO RICO
ENCORE AND PIXIE, TWO LATE-SEASON MANDARIN HYBRIDS IN PUERTO RIC
Changes in the kinase activity of the insulin receptor account for an increased insulin sensitivity of mammary gland in late pregnancy
Copyright (1998) The Endocrine Society .The paper can be found at the following URL on the website http://endo.endojournals.org
Analysis, Validation and Optimization of the Multi-Stage Sequential Wiredrawing Process of EN AW-1370 Aluminium
For the wiredrawing of aluminium, the initial wire rod is obtained by continuous inverted casting. The raw geometry is industrially processed in a linear multi-step wiredrawing sequence to obtain a wire that is commonly used for the manufacture of electrical conductors. In the present work a complete study of the material has been made. The experimental procedure consisted in the realization of a sequence of section reduction stages in the laboratory, a sequence designed following the technological criteria recommended by the manufacturer of the drawing machine in which the industrial process will be implemented. From the specimens corresponding to each reduction step, it has been possible to know the evolution of the main mechanical properties when this pure aluminium is processed by wiredrawing. This information has led to establish the hardening law by which it is possible characterize the plastic behaviour of this pure metal when it is transformed by this specific sequential process of cold forming. The strain hardening law has been implemented in a numerical simulation software application and the experimental setup has been simulated for its validation. Finally, the classic analytical solution founded in the “slab method” has been applied for the design of a proposal for the optimization of the industrial wiredrawing process
Use of the support vector machine (SVM) algorithm to predict geometrical accuracy in the manufacture of molds via single point incremental forming (SPIF) using aluminized steel sheets
In the present work, the use of the support vector machine (SVM) algorithm is proposed to generate models that allow predicting the geometrical accuracy of molds manufactured via single point incremental forming (SPIF) using aluminized steel sheets DX51D AS120 B CO. For this purpose, 27 molds were manufactured, using the dummy technique, and employing different process parameters (tool diameter, spindle speed, feed rate, step size) and toolpath strategies (contour-parallel, spiral, radial). The molds manufactured were geometrically characterized by means of a coordinate measuring machine: the transverse profile of each mold was measured and compared with the expected theoretical profile. Three geometrical values were extracted from this comparison: the area between the two profiles, the moment of inertia of this area with respect to the Y-axis and the difference in height between the two profiles at the mid-point of the mold. The geometrical accuracy of the mold increases if these values decrease. The model that achieved the best results is the one associated with the area between the theoretical and real profiles (correctly classified instances = 90%; kappa statistic = 0.8). This model was generated using the LibSVM (linear kernel) algorithm and evaluating only three of the five parameters (strategy, tool diameter and step size). In addition, process maps were drawn up to show briefly which values generate higher geometrical accuracy in the molds: contour-parallel strategy, tool diameter equal to 12 mm and small step size values
Experimental Study for the Stripping of PTFE Coatings on Al-Mg Substrates Using Dry Abrasive Materials
Polytetrafluoroethylene (PTFE) coatings are used in many applications and processing industries. With their use, they wear out and lose properties and must be replaced by new ones if the cost of the element so advises. There are different stripping techniques, but almost all of them are very difficult and require strict environmental controls. It is a challenge to approach the process through efficient and more sustainable techniques. In the present work, we have studied the stripping of PTFE coatings by projection with abrasives (1 step) as an alternative to carbonization + sandblasting procedures (2 steps). For this purpose, different types of abrasives have been selected: brown corundum, white corundum, glass microspheres, plastic particles, and a walnut shell. The tests were performed at pressures from 0.4 to 0.6 MPa on PTFE-coated aluminium substrates of EN AW-5182 H111 alloy. Stripping rates, surface roughness, and substrate hardness have been studied. Scanning electron microscopy (SEM) images of sandblasted specimens have also been obtained. All abrasives improved mechanical and surface properties in one-step vs. two-step processes. The abrasives of plastic and glass microspheres are the most appropriate for the one-step process, which increases the hardness and roughness level Ra in the substrate. Corundum abrasives enable the highest stripping rates
Use of Data Mining Techniques for the Prediction of Surface Roughness of Printed Parts in Polylactic Acid (PLA) by Fused Deposition Modeling (FDM): A Practical Application in Frame Glasses Manufacturing
In the present work, ten data mining algorithms have been used to generate models capable of predicting the surface roughness of parts printed on polylactic acid (PLA) by using fused deposition modeling (FDM). The models have been trained using experimental data measured on 27 horizontal (XY) and 27 vertical (XZ) specimens, printed using different values for the parameters studied (layer height, extrusion temperature, print speed, print acceleration and flow). The models generated by multilayer perceptron (MLP) and logistic model trees (LMT) have obtained the best results in a cross-validation. Although it does not obtain such optimal results, the J48 algorithm (C4.5) allows the generation of models in the form of a decision tree. These trees permit to determine which print parameters have an influence on the surface roughness. For XY specimens, the surface roughness measured in the direction parallel to the extrusion path (Ra,0,XY ) depends on the flow, the print temperature and the layer height; in the direction perpendicular to the extrusion path, the surface roughness (Ra,90,XY) depends only on the flow. For XZ specimens, the surface roughness measured in the direction parallel to the extrusion path (Ra,0,XZ) depends only on the print speed; in the direction perpendicular to the extrusion path (Ra,90,XZ), it depends on the layer height and the extrusion temperature. According to the study carried out, the most suitable set up provides values of Ra,0,XY, Ra,90,XY, Ra,0,XZ and Ra,90,XZ equal to 0.46, 1.18, 0.45 and 11.54, respectively. A practical application of this work is the manufacture of PLA frame glasses using FDM
Los carnívoros del yacimiento pleistoceno de Cueva del Búho (Segovia, España) y sus huellas de actividad
This paper deals with the carnivores from Cueva del Búho (Segovia, Spain) identifying five species (Croeuta eroeuta spelaea, Meles meles, Canis lupus, Vulpes vulpes and, Lynx spelaea). Living traces of hyena are decribed: coprolites, bone surface modifications and body parts representation. It is deduced that this site has been originated in a den of Croeuta croeuta spelaea.Este trabajo estudia los carnívoros de Cueva del Búho (Segovia, España) identificando cinco especies (Croeuta croeuta spelaea, Meles meles, Canis lupus, Vulpes vulpes y Lynx spelaea). Se describen huellas de actividad de hiena: coprolitos, marcas en la superficie de huesos y representación de las distintas partes del esqueleto. Se deduce que el yacimiento se ha originado en una madriguera de Crocuta croeuta spelaea
Risk of Dementia Associated with Elevated Plasma Homocysteine in a Latin American Population
The relationship between total homocysteine (tHcy) and dementia risk remains controversial, as the association varies among populations and dementia subtypes. We studied a Venezuelan population that has high prevalence of both elevated tHcy and dementia. We tested the hypotheses that (1) elevated tHcy is associated with increased dementia risk, (2) the risk is greater for vascular dementia (VaD) than for Alzheimer's disease (AD), and (3) a history of stroke may partly explain this association. 2100 participants (≥55 years old) of the Maracaibo Aging Study underwent standardized neurological, neuropsychiatric, and cardiovascular assessments. Elevated tHcy was significantly associated with dementia, primarily VaD. When history of stroke and other confounding factors were taken into account, elevated tHcy remained a significant risk factor in older (>66 years), but not in younger (55–66 years) subjects. Ongoing studies of this population may provide insight into the mechanism by which tHcy increases risk for dementia
Stripping of PFA Fluoropolymer Coatings Using a Nd:YAG Laser (Q-Switch) and an Yb Fiber Laser (CW)
Fluoropolymers such as PFA are used as coatings for the protection of metal substrates due to their high chemical inertia and non-stick properties. These are “wear and tear” coatings and they degrade, at which point they should be removed for a new application. The removal of these types of coating by laser is of interest due to the process’s flexibility, precision, ease of automation, and environmental sustainability. The efficiency of the procedure was shown with the use of a source in a pulsed Nd:YAG and a source in continuous mode of fiber (Yb). The rates of stripping (cm2/min) and fluence (J/cm2) were analyzed and related to the power of the laser sources. Variations of the substrate after stripping were studied: roughness and hardness. The properties of the coating, thickness, roughness, water sliding angle, and microhardness were also evaluated. It was concluded that the laser in continuous mode was more efficient than the pulsed laser; laser removal of fluoropolymers has a strong relationship with reflectivity, and the mechanical and surface properties of the substrate after stripping remained virtually unchanged
Long-term monitoring of the radio-galaxy M87 in gamma-rays: joint analysis of MAGIC, VERITAS and Fermi-LAT data
M87 was discovered in the very-high-energy band (VHE, E > 100 GeV) with HEGRA
in 2003, long before its emission was detected in the high-energy band (HE, E >
100 MeV) with Fermi-LAT in 2009, opening the window to a new family of
extragalactic sources with tilted jets. After a series of major VHE flares in
2005, 2008, and 2010, which were detected in multiple bands, the source has
been found in a low activity state, interrupted only by comparatively
smaller-scale flares. MAGIC and VERITAS, two stereoscopic Cherenkov telescope
arrays located at Roque de los Muchachos Observatory (Canary Islands, Spain)
and the Fred Lawrence Whipple Observatory (Arizona, US), have monitored M87
continuously and in coordination for more than 10 years. In this work, we
present the data for 4 years of MAGIC and VERITAS observations corresponding to
2019, 2020, 2021 and 2022. The resulting light curves are shown in daily and
monthly scales where no significant variability is observed. In addition, we
show the first joint analysis using combined event data from the two VHE
instruments and Fermi-LAT to compute the spectral energy distribution
- …