Transport of N-CD and Pre-Sorbed Pb in Saturated Porous Media

Carbon dots (CDs) are a new type of nanomaterials of the carbon family with unique characteristics, such as their small size (e.g., \u3c10 nm), high water solubility, low toxicity, and high metal affinity. Modification of CDs by Nitrogen functional groups (N-CDs) enhances their metal adsorption capacity. This study investigated the influences of pH (4, 6, and 9), ionic strength (1, 50, and 100 mM), and cation valency (Na+ and Ca2+) on the competitive adsorption of Pb to quartz and N-CD surfaces, the transport and retention of N-CDs in saturated porous media, and the capacity of N-CDs to mobilize pre-adsorbed Pb in quartz columns. Pb adsorption was higher on N-CDs than on quartz surfaces and decreased with increases in ionic strength (IS) and divalent cations (Ca2+) concentration. N-CD mobility in quartz columns was highest at pH of 9- and 1-mM monovalent cations (Na+) and decreased with decreases in pH and increases in ionic strength and ion valency. N-CDs mobilized pre-adsorbed Pb from quartz due to the higher adsorption affinity of Pb to N-CD than to quartz surfaces. These findings provide valuable insights into the transport, retention, and risk assessment of lead in the presence of carbon-based engineered nanoparticles

Enrichments of Metals, Including Methylmercury, in Sewage Spills in South Carolina, USA

Exposure to microbial pathogens is the primary concern of sanitary sewer overflows; however, sewage spills may also be a significant source of toxic metals, including methylmercury (MeHg). Between November 2015 and January 2017, after Hurricane Joaquin, surface water samples were collected routinely from three creeks in Columbia, SC. Routine sampling coincided with six sewage spills. Total mercury (THg) and MeHg (unfiltered and filtered) and 32 other metals (filtered) were measured. Compared with surface water samples, THg (unfiltered and filtered), MeHg (unfiltered), and 19 other metals were significantly higher in sewage spills (all log(10)-transformed) (two-tailed t test, p < 0.05 for all, n = 38-42). Toxic weighting factors were applied to 18 metals, including THg and MeHg, in samples collected directly from sewage spills (n = 3-4) and a wastewater outfall (n = 5). On average, sewage was 18.2 and 12.0 times more toxic for THg and MeHg, respectively, and 1.75 times more toxic for all 18 metals, compared to treated effluent from the wastewater outfall. Results suggest sewage spills were a source of inorganic Hg, MeHg, and other metals to the receiving waters and may potentially contribute to water quality impairments

Results of an interlaboratory comparison for characterization of Pt nanoparticles using single-particle ICP-TOFMS

This study describes an interlaboratory comparison (ILC) among nine (9) laboratories to evaluate and validate the standard operation procedure (SOP) for single-particle (sp) ICP-TOFMS developed within the context of the Horizon 2020 project ACEnano. The ILC was based on the characterization of two different Pt nanoparticle (NP) suspensions in terms of particle mass, particle number concentration, and isotopic composition. The two Pt NP suspensions were measured using icpTOF instruments (TOFWERK AG, Switzerland). Two Pt NP samples were characterized and mass equivalent spherical sizes (MESSs) of 40.4 ± 7 nm and 58.8 ± 8 nm were obtained, respectively. MESSs showed <16% relative standard deviation (RSD) among all participating labs and <4% RSD after exclusion of the two outliers. A good agreement was achieved between the different participating laboratories regarding particle mass, but the particle number concentration results were more scattered, with <53% RSD among all laboratories, which is consistent with results from previous ILC studies conducted using ICP-MS instrumentation equipped with a sequential mass spectrometer. Additionally, the capabilities of sp-ICP-TOFMS to determine masses on a particle basis are discussed with respect to the potential for particle density determination. Finally, because quasi-simultaneous multi-isotope and multi-element determinations are a strength of ICP-TOFMS instrumentation, the precision and trueness of isotope ratio determinations were assessed. The average of 1000 measured particles yielded a precision of below ±1% for intensity ratios of the most abundant Pt isotopes, i.e.194Pt and 195Pt, while the accuracy of isotope ratios with the lower abundant isotopes was limited by counting statistics

Conformation and size of humic substances: Effects of major cation concentration and type, pH, salinity, and residence time

International audienceThe macromolecular structure of humic substances (HS), i.e. molecular size, shape, conformation, and weight is believed to control key physico-chemical reactions in aquatic systems. However, these properties of HS are still deeply a matter of debate. Furthermore, they are affected by solution physico-chemical parameters such as ionic strength, pH, and chemical composition, etc. To better understand aggregation processes of HS in natural waters, the effects of cation concentration and type, water composition, and pH on the size and conformation of the Suwannee River Humic Acid (SRHA) were investigated with synthetic solutions. The size and the conformation of the SRHA in NaCl and CaCl2 solutions at different concentrations (0.001–0.5 M) and pH (4.5–9.3) were determined using the photon correlation spectroscopy (PCS) and transmission electron microscopy (TEM), respectively. In addition, dissolved organic matter (DOM) samples collected from the Adour estuary along a salinity gradient were imaged by TEM. The average size of the SRHA measured by PCS increased with pH and ionic strength. This behavior was confirmed by TEM micrographs. The increase in pH and CaCl2 engendered aggregation of the SRHA. Two aggregation steps were identified, a big increase in HS size occurred for small changes in CaCl2 concentrations in the range 0.02 M CaCl2. The parallel analysis of SRHA by PCS and TEM allowed overcoming the limits for both techniques.Comparable results were found for the DOM samples from the Adour estuary (South West of France). The conformation and size of the HS network of these samples varied with the salinity gradient. TEM images demonstrated that, HS have a branched open network in freshwater whereas they have a more compacted and close network with increasing salinity

Elemental Fingerprints in Natural Nanomaterials Determined using SP-ICP-TOF-MS and Clustering Analysis

Detection and quantification of engineered nanomaterials in environmental systems require precise knowledge of the elemental composition, association, and ratios in homologous natural nanomaterials (NNMs). Here, we characterized soil NNMs at the single particle level using single particle-inductively coupled plasma-time of flight-mass spectrometer (SP-ICP-TOF-MS) in order to identify the elemental purity, composition, associations, and ratios within NNMs. Elements naturally present as a major constituent in NNMs such as Ti, and Fe occurred predominantly as pure/single metals, whereas elements naturally present at trace levels in NNMs occurred predominantly as impure/multi-metal NNMs such as V, Nb, Pr, Nd, Sm, Eu, Gd, Tb, Er, Dy, Yb, Lu, Hf, Ta, Pb, Th, and U. Other elements occurred as a mixture of single metal and multi-metal NNMs such as Al, Si, Cr, Mn, Ni, Cu, Zn, Ba, La, Ce, W, and Bi. Thus, elemental purity can be used to differentiate ENMs vs. NNMs only for those elements that occur at trace level in NNMs. We also classified multi-metal NNM into clusters of similar elemental composition and determined their mean elemental composition. Six major clusters accounted for more than 95% of the detected multi-metal NNMs including Al-, Fe-, Ti-, Si-, Ce-, and Zr-rich particles\u27 clusters. The elemental composition of these multi-metal NNM clusters is consistent with naturally occurring minerals. Titanium occurred as a major element (\u3e70% of the total metal mass in NNMs) in Ti-rich cluster and as a minor

Transport of N-CD and Pre-Sorbed Pb in Saturated Porous Media

Carbon dots (CDs) are a new type of nanomaterials of the carbon family with unique characteristics, such as their small size (e.g., &lt;10 nm), high water solubility, low toxicity, and high metal affinity. Modification of CDs by Nitrogen functional groups (N-CDs) enhances their metal adsorption capacity. This study investigated the influences of pH (4, 6, and 9), ionic strength (1, 50, and 100 mM), and cation valency (Na+ and Ca2+) on the competitive adsorption of Pb to quartz and N-CD surfaces, the transport and retention of N-CDs in saturated porous media, and the capacity of N-CDs to mobilize pre-adsorbed Pb in quartz columns. Pb adsorption was higher on N-CDs than on quartz surfaces and decreased with increases in ionic strength (IS) and divalent cations (Ca2+) concentration. N-CD mobility in quartz columns was highest at pH of 9- and 1-mM monovalent cations (Na+) and decreased with decreases in pH and increases in ionic strength and ion valency. N-CDs mobilized pre-adsorbed Pb from quartz due to the higher adsorption affinity of Pb to N-CD than to quartz surfaces. These findings provide valuable insights into the transport, retention, and risk assessment of lead in the presence of carbon-based engineered nanoparticles

Association of arsenic and phosphorus with iron nanoparticles between streams and aquifers: Implications for arsenic mobility

The microbial oxidation of organic matter coupled to reductive iron oxide dissolution is widely recognized as the dominant mechanism driving elevated arsenic (As) concentrations in aquifers. This paper considers the potential of nanoparticles to increase the mobility of As in aquifers, thereby accounting for discrepancies between predicted and observed As transport reported elsewhere. Arsenic, phosphorus, and iron size distributions and natural organic matter association were examined along a flow path from surface water via the hyporheic zone to shallow groundwater. Our analysis demonstrates that the colloidal Fe concentration (>1 kDa) correlates with both colloidal P and colloidal As concentrations. Importantly, increases in the concentration of colloidal P (>1 kDa) were positively correlated with increases in the concentration of nominally dissolved As (<1 kDa), but no correlation was observed between colloidal As and nominally dissolved P. This suggests that P actively competes for adsorption sites on Fe nanoparticles, displacing adsorbed As, thus mirroring their interaction with Fe oxides in the aquifer matrix. Dynamic redox fronts at the interface between streams and aquifers may therefore provide globally widespread conditions for the generation of Fe nanoparticles, a mobile phase for As adsorption currently not a part of reactive transport models