Utilizing ultrasonic energy for reduction of free fatty acids in crude palm oil

Recently, biodiesel production from abundant bio-sources has drawn the attention of the academic and the industrial community. In this study, crude palm oil (CPO) containing 8.7% free fatty acid content (FFA) was used as raw material. Different common types of acid catalysts (sulfuric acid, methanesulfonic acid and hydrochloric acid) were optimized to investigate the catalytic activity of each acid in the pre-treatment of CPO by the esterification process. Ultrasonic energy was used for the reduction of FFA in CPO. FFA content was measured at different sonication intervals, and the optimum time was determined. Hydrochloric acid showed the highest catalytic activity in the reduction of FFA content in CPO, as well as in converting FFA to fatty acid methyl ester (FAME). From this work, it is reasonable to conclude that there is significant enhancement in the pre-treatment of oils by applying ultrasonic energy using long sonication time.Keywords: Biodiesel, crude palm oil, free fatty acids, ultrasonic energ

Different hydrodynamic model for gas-phase propylene polymemation in a catalytic fluidized bed reactor

A comparative simulation study was carried out using the improved well-mixed, constant bubble size and well mixed models. These fluidized bed reactor models, combined with comprehensive kinetics for propylene homo-polymerization in the presence of a multiple active site Ziegler-Natta catalyst. In the improved model, the effect of the presence of particles in the bubbles and the excess gas in the emulsion phase was taken into account to improve the quantitative understanding of the actual fluidized bed process. The superficial gas velocity and catalyst feed rate have a strong effect on the hydrodynamics and reaction rate, which results in a greater variation in the polymer production rate and reactor temperature. At typical operating conditions the improved well mixed and well mixed models were in good agreement. While the COO!ICU bubble size model was found to over-predict the emulsion phase temperature and underpredict propylene concentration

Application of low cost ionic liquids for the separation of glycerine from palm oil-based biodiesel

One of the most serious obstacles in using biodiesel as an alternative fuel is the intricate and costly purification processes involved in its production. The difficulties in the separation of glycerine and other reaction mixtures necessitate the development of new competent low cost separation processes. In the present work, a low cost quaternary ammonium salt-glycerinebased ionic liquid is used as a solvent for extracting glycerine from the transesterification biodiesel product. The separation technique was tested on palm oil-based biodiesel. The laboratory-scale purification experiments established the viability of the technique as the purified biodiesel fulfilled the EN 14214 and ASTM D6751 standard specifications for biodiesel fuel in terms of glycerine content

Temperature Effects on the Kinetics of Ferrocene and Cobaltocenium in Methyltriphenylphosphonium Bromide Based Deep Eutectic Solvents

The oxidation of ferrocene (Fc/Fc+) and reduction of cobaltocenium (Cc+/Cc) under different temperatures has been studied by cyclic voltammetry and double potential step chronoamperometry in deep eutectic solvents (DESs) consisting of methyltriphenylphosphonium bromide salt with tri-ethylene glycol, glycerol or ethylene glycol as hydrogen bond donors. The temperature dependence of the measured physical properties of DESs (such as viscosity and conductivity) is discussed in detail. The kinetics of the redox couples are studied using cyclic voltammetry, and the standard heterogeneous electron transfer rate constant, k0 is found to be of the order of 10−5 to 10−4 cms−1 at different temperatures. The diffusion coefficient, D, of Fc and Cc+ is determined to lie between 8.28 × 10−10 to 6.65 × 10−9 cm2 s−1. These results show that both k0 and D increase with temperature in the studied DESs. In addition, better kinetic parameters for the DES with ethylene glycol as hydrogen bond donor means that this could be evaluated favorably as both solvents and electrolytes for redox flow cells

Investigation of ammonium- and phosphonium-based deep eutectic solvents as electrolytes for a non-aqueous all-vanadium redox cell

The charge/discharge characteristics for vanadium acetylacetonate in deep eutectic solvents were evaluated using an H-cell with an anion-exchange membrane separator for the first time. Coulombic (CE) and energy efficiencies (EE) of the electrolyte containing V(acac)3/0.5 M TEABF4 in DES3 (a hydrogen bonded eutectic between choline chloride and ethylene glycol) were obtained as 49-52% and 25-31%, respectively, when charging from 0 to 50% of theoretical maximum state-of-charge for 12 cycles. The low CE may be due to the crossover of the active species through the separator, or to the loss of active vanadium due to a parasitic reaction. However, the CE was similar to that for acetonitrile (CH3CN) indicating the promise of DESs as suitable electrolytes for future evaluation. Charge and discharge voltages are respectively higher and lower than the formal cell potential obtained by voltammetry. Ohmic drop in the DES results from the low conductivity of the electrolyte and the relatively large distance between the two electrodes in the H-cell. Further studies require investigation in a flow cell with analyses of polarization curves and impedance to determine the loss mechanisms in sufficient detail

Preparation of sustainable activated carbon-alginate beads impregnated with ionic liquid for phenol decontamination

Powder activated carbon (PAC), derived from calligonum pollygonides, was successfully modified with the ionic liquid (IL) trihexyltetradecylphosphonium bromide ([PC6C6C6C14][Br]) in the presence of sodium alginate and characterized using SEM, FTIR and TGA. PAC, granular AC (GAC), AC-alginate and AC-Alg-IL bead were assessed for the removal of phenol from aqueous media via batch adsorption. Both PAC and AC-Alg-IL beads displayed high adsorption capacities, 123 mg/g and 78 mg/g, respectively, under optimized conditions. In contrast, GAC gave a much lower adsorption capacity than AC-ALG-IL beads, indicating that AC-ALG-IL beads are superior as potential adsorbents for this industrial application. Theoretical studies showed that the pseudo-second-order kinetic and Freundlich isotherm models were suitable to describe the adsorption process. The interaction between phenol and AC-Alg-IL beads was analyzed using the conductor-like screening model for realistic solvents (COSMO-RS). It has been concluded that AC-Alg-IL beads can be used as an efficient adsorbent for phenol and other organic compounds

DESolution of CD and CB Macrocycles.

Supramolecular chemistry utilizing the macrocyclic hosts cyclodextrins (CDs) and cucurbit[n]urils (CB[n]s) is traditionally performed in aqueous media; however, their solubility is typically poor, especially for the family of CB[n]s. Through derivatization of these macrocycles their solubility can be augmented to enable enhanced solubility in water and in some organic solvents. The increase in solubility of these derivatized macrocycles allows for their use in a wider range of chemical environments and giving rise to myriad potential applications. The dissolution of parent CDs (α-, β- and γ-) and CB[n]s (n=6-8) in deep eutectic solvents (DES) is reported, showing dramatic enhanced solubility of the larger species in both families, CB[7] and CB[8] as well as β- and γ-CD, respectively. Furthermore, the host-guest properties are maintained in this new solvation medium.This research was supported by the European Union (European Research Council Starting Grants ASPiRe 240629 (OAS), EPSRC departmental PhD studentship (EP/K503009/1 (JAM)) and Marie Curie FP7 SASSYPOL ITN (607602) programme (OAS & MO)

Encapsulated deep eutectic solvent for esterification of free fatty acid

A novel encapsulated deep eutectic solvent (DES) was introduced for biodiesel production via a two-step process. The DES was encapsulated in medical capsules and were used to reduce the free fatty acid (FFA) content of acidic crude palm oil (ACPO) to the minimum acceptable level (< 1%). The DES was synthesized from methyltriphenylphosphonium bromide (MTPB) and p-toluenesulfonic acid (PTSA). The effects pertaining to different operating conditions such as capsule dosage, reaction time, molar ratio, and reaction temperature were optimized. The FFA content of ACPO was reduced from existing 9.61% to less than 1% under optimum operating conditions. This indicated that encapsulated MTPB-DES performed high catalytic activity in FFA esterification reaction and showed considerable activity even after four consecutive recycling runs. The produced biodiesel after acid esterification and alkaline transesterification met the EN14214 international biodiesel standard specifications. To our best knowledge, this is the first study to introduce an acidic catalyst in capsule form. This method presents a new route for the safe storage of new materials to be used for biofuel production. Conductor-like screening model for real solvents (COSMO-RS) representation of the DES using σ-profile and σ-potential graphs indicated that MTPB and PTSA is a compatible combination due to the balanced presence and affinity towards hydrogen bond donor and hydrogen bond acceptor in each constituent

A Mn(III) polyoxotungstate in the oxidation of organosulfur compounds by H2O2 at room temperature: an environmentally safe catalytic approach

The tetrabutylammonium (TBA) salt of a Keggin-type polyoxometalate (POM), with the chemical formula TBA4H2[BW11Mn(H2O)O39]{\textperiodcentered}H2O, TBABW11Mn, was evaluated as a catalyst in the oxidation by hydrogen peroxide of several organosulfur compounds, namely benzothiophene (BT), 2-methylbenzothiophene (2-MBT), 3-methylbenzothiophene (3-MBT), dibenzothiophene (DBT), 4-methyldibenzothiophene (4-MDBT) and 4,6-diethyldibenzothiophene (4,6-DEDBT), in acetonitrile at room temperature. All compounds were oxidized to their corresponding sulfones with high conversion and selectivity. Following the excellent results achieved, the BW11Mn/H2O2 in CH3CN system was tested in the oxidation of model fuels (MFs) consisting of a mixture of BTs and DBTs in hexane (MF1 containing mainly BTs and MF2 containing predominantly DBTs). In both cases, the organosulfur compounds from the model fuels were fully converted into their corresponding sulfones. Envisaging the development of a promising desulfurization procedure, the extraction of sulfur compounds from MF2 was attempted after the catalytic oxidation process. More than 98 mol% was removed using an ethanol/H2O mixture