3,648 research outputs found
Recommended from our members
Exact and approximate boundary data interpolation in the finite element method
Matching boundary data exactly in an elliptic problem avoids one of Strang's "variational crimes". (Strang and Fix (1973)). Supporting numerical evidence for this procedure is given by Marshall and Mitchell (1973), who considered the solution of Laplace's equation with Dirichlet boundary data by bilinear elements over squares and measured the errors in the L2 norm. Then Marshall and Mitchell (1978) obtained some surprising results: for certain triangular elements, matching the boundary data exactly produced worse results than the usual procedure of interpolating the boundary data
The use of conservation biomass feedstocks as potential bioenergy resources in the United Kingdom
A number of countries have introduced energy policies to reduce the emission of carbon dioxide which, in the case of bio-heat, has resulted in increased use of small wood burning stoves and boilers, particularly in Europe. There are issues surrounding the supply of sustainable wood feedstock, prompting a desire to utilise local biomass resources. This includes biomass generated through the management of natural woodlands in nature reserves and conservation areas. These management practices can also extend to other areas, such as raised bog wildernesses and estuary Reed beds. We term the biomass from this resource as conservation biomass. This study is concerned with the viability of this resource as a fuel within the United Kingdom, and combustion tests were carried out using a small domestic stove. It was concluded that there is as much as 500 kt yâ1 that could be used in this way
Organic Carbon Emissions from the Co-firing of Coal and Wood in a Fixed Bed Combustor
Co-firing of biomass and coal and biomass reduces the emission of pollutants and the overall effects have been extensively studied, but many aspects of the detailed mechanism remain uncertain. A number of studies have been previously made by us of emissions from the combustion in a fixed-bed furnace of bituminous coal and wood, both individually and together, and it was observed that biomass produced less soot and lower NOX emissions. These data are combined with recent measurements of emissions of black carbon (BC) and organic carbon (OC), which are an important source of climate forcing, from the combustion of a number of solid fuels. Conclusion are drawn about the nature of the OC and how the values are dependent on the measurement technique used. Complementary analytical-scale combustion and pyrolysis experiments were also carried out. The results of the analysis of emissions and reaction products, mainly by gas chromatographyâmass spectrometry (GCâMS), were interpreted so as to construct a model for pollutant formation during co-firing
The Impact of Fuel Properties on the Composition of Soot Produced by the Combustion of Residential Solid Fuels in a Domestic Stove
Soot is formed from the incomplete combustion of biomass and conventional fossil fuels. It consists largely of a carbonaceous core termed Elemental Carbon (EC) with adsorbed volatile organic species, commonly termed Organic Carbon (OC). Estimation of the ratio of BC/OC is critical as climate models have recognised the Global Warming Potential (GWP) of BC as the second most important climate forcing agent after carbon dioxide. This paper presents values of EC, OC and EC/TC (where TC = EC + OC) for three different soot types: Firstly, soots collected on filters from the combustion of eight fossil fuel and biomass residential solid fuels (RSF), burned in a 6 kW heating stove. Secondly, chimney soot deposits taken from 'real-life' stoves installed in domestic homes; and finally wick burner soots generated from biomass model compounds; namely eugenol, furfural and anisole. Values of the EC/TC ratios for wood logs, torrefied briquettes, coal and smokeless fuel are given. These ratios are highly dependent on burning conditions; namely the flaming and smouldering phases. The results of this study suggest that EC and OC emissions from various solid fuels differ substantially in composition and relative proportion, which is useful information for climate models
On the dynamic response of an instrumented headform for alternative mounting stiffnesses when subjected to ballistic impacts
Š 2017, Š IMechE 2017. The current British Standard for head protectors for cricketers has been recently revised to include a projectile-based battery of tests, the intention being to ensure that a certified helmet will also prevent contact of the ball or grille with the specified headform facial region. The purpose of this study was to characterise the dynamic response of the headform to direct ballistic impacts for alternative headform mounting arrangements. On one hand, and in accordance with the relevant sections of the Standard, what might be described as a âConstrainedâ setup was evaluated while, on the other hand, an arrangement with significantly reduced stiffness, in line with that previously reported for the passive human neck, was subject to equivalent appraisal. For each mounting scenario, an air cannon was used to project a cricket training ball at three speeds towards the instrumented headform at three locations with five repeats per speed/location combination. High-rate/resolution video and piezoelectric accelerometer data were collected and processed to determine the headform response. While differences between specific ball impact speed and location scenarios are set out in detail later in the article, overall observations are summarised as follows. From a ball/headform contact duration standpoint, video derived results showed ranges of 1.30â1.45 ms (Constrained) versus 1.26â1.41 ms. Maximum ball deformations, the timing of which enabling the event to be subdivided into âloadingâ and âunloadingâ phases, were found to be 82.5%â86.2% (Constrained) versus 82.8%â86.4% of original ball diameter; mean peak headform accelerations during loading were found to be 860â1615 m/s2 (Constrained) versus 967â1638 m/s2; and headform speeds at the end of the loading phase were found to be 0.5â0.92 m/s (Constrained) versus 0.54â0.93 m/s. Differences between headform response for the two mounting arrangements were observed to be more substantial during the loading rather than unloading phase
Emissions performance of high moisture wood fuels burned in a residential stove
A study has been made of the effect of fuel moisture content on emissions from a wood burning domestic stove. Two fuel types were studied: beech which is a hardwood, and spruce which is a softwood. The moisture contents investigated were for a freshly felled wood, a seasoned wood and a kiln dried wood. The effect of the moisture measurement method was considered using a commercial electrical conductivity probe moisture meter which was compared with laboratory analysis by drying in an oven at 105âŻÂ°C. It was shown that the probe can significantly underestimate the actual moisture content in certain cases. Correlations were made of the burning rate, the Emission Factors for the formation of gaseous and particulate pollutants as a function of the moisture content. We also studied the ratio of Black Carbon to Total Carbon (BC/TC) to obtain information on the organic content of the particles. The NOâ emissions from this type of stove were only dependent on the fuel-nitrogen content and not on the moisture content
New Concepts of Fluorescent Probes for Specific Detection of DNA Sequences: Bis-Modified Oligonucleotides in Excimer and Exciplex Detection
The detection of single base mismatches in DNA is important for diagnostics, treatment of genetic diseases, and identification of single nucleotide polymorphisms. Highly sensitive, specific assays are needed to investigate genetic samples from patients. The use of a simple fluorescent nucleoside analogue in detection of DNA sequence and point mutations by hybridisation in solution is described in this study. The 5â˛-bispyrene and 3â˛-naphthalene oligonucleotide probes form an exciplex on hybridisation to target in water and the 5â˛-bispyrene oligonucleotide alone is an adequate probe to determine concentration of target present. It was also indicated that this system has a potential to identify mismatches and insertions. The aim of this work was to investigate experimental structures and conditions that permit strong exciplex emission for nucleic acid detectors, and show how such exciplexes can register the presence of mismatches as required in SNP analysis. This study revealed that the hybridisation of 5â˛-bispyrenyl fluorophore to a DNA target results in formation of a fluorescent probe with high signal intensity change and specificity for detecting a complementary target in a homogeneous system. Detection of SNP mutations using this split-probe system is a highly specific, simple, and accessible method to meet the rigorous requirements of pharmacogenomic studies. Thus, it is possible for the system to act as SNP detectors and it shows promise for future applications in genetic testing
Effect of Arterial Stiffness and Carotid Intima-Media Thickness Progression on the Risk of Dysglycemia, Insulin Resistance, and Dyslipidemia: a Temporal Causal Longitudinal Study
This is the final version. Available on open access from the American Heart Association via the DOI in this recordData Availability Statement:
The informed consent obtained from ALSPAC participants does not allow the data to be made freely available through any third-party maintained public repository. However, data used for this submission can be made available on request to the ALSPAC Executive. The ALSPAC data management plan describes in detail the policy regarding data sharing, which is through a system of managed open access. Full instructions for applying for data access can be found here: http://www.bristol.ac.uk/alspac/researchers/access/. The ALSPAC study website contains details of all the data that are available (http://www.bristol.ac.uk/alspac/researchers/our-data/).BACKGROUND: We investigated the temporal causal longitudinal associations of carotid-femoral pulse wave velocity (cfPWV), a measure of arterial stiffness, and carotid intima-media thickness (cIMT) progression with the risk of dysglycemia, insulin resistance, and dyslipidemia. METHODS: We included 3862, 17.7-year-old, participants from the Avon Longitudinal Study of Parents and Children, followed up for 7 years. cfPWV, cIMT, and fasting plasma samples were repeatedly measured. We computed homeostatic model assessment (HOMA) of insulin resistance and percent pancreatic beta-cell function. Data were analyzed using logistic regression, linear mixed-effect, and cross-lagged structural equation models. RESULTS: A higher cfPWV at 17.7 years was associated with higher insulin at age 24.5 years (odds ratio, 1.25 [CI, 1.08-1.44]; P=0.003), which slightly attenuated after covariates adjustment. Higher cIMT at 17.7 years was associated with lower insulin (odds ratio, 0.06 [0.01-0.95]; P=0.046) at 24.5 years, after covariate adjustments. In mixed-effect models, the 7-year progression in cfPWV (predictor) was directly associated with the increase in triglyceride (outcome). cIMT progression was associated with the 7-year increase in LDL (low-density lipoprotein), triglyceride, and glucose. In cross-lagged models, higher cfPWV at 17.7 years was associated with higher insulin (β=0.06, SE, 0.12, P=0.014), HOMA of insulin resistance, and HOMA-percent pancreatic beta-cell function at 24.5 years. However, insulin, HOMA of insulin resistance, and HOMA-percent pancreatic beta-cell function at 17.7 years were not associated with cfPWV at 24.5 years. Higher cIMT at 17.7 years was associated with reduced insulin, HOMA of insulin resistance, and HOMA-percent pancreatic beta-cell function at 24.5 years, but not vice versa. Higher glucose at 17.7 years was associated with higher cfPWV and cIMT at 24.5 years only. CONCLUSIONS: Arterial stiffness in adolescence may be a causal risk factor for hyperinsulinemia and insulin resistance in young adulthood
Public awareness of cancer in Britain: a population-based survey of adults
*_Objective:_* To assess public awareness of cancer warning signs, anticipated delay, and perceived barriers to seeking medical advice in the British population. 
Methods: We carried out a population-based survey using face-to-face, computer-assisted interviews to administer the Cancer Awareness Measure (CAM), a newly-developed, validated measure of cancer awareness. The sample included 2216 adults (970 male and 1246 female) recruited as part of the Office for National Statistics Opinions Survey using stratified probability sampling.

*_Results:_* Awareness of cancer warning signs was low when open-ended (recall) questions were used and higher with closed (recognition) questions; but on either measure, awareness was lower in those who were male, younger, and from lower socioeconomic status (SES) groups or ethnic minorities. The most commonly endorsed barriers to help-seeking were difficulty making an appointment, worry about wasting the doctor’s time and worry about what would be found. Emotional barriers were more prominent in lower SES groups and practical barriers (e.g. too busy) more prominent in higher SES groups. Anticipated delay was lower in ethnic minority and lower SES groups. In multivariate analysis, higher symptom awareness was associated with lower anticipated delay, and more barriers with greater anticipated delay.

*_Conclusions:_* A combination of public education about symptoms and empowerment to seek medical advice, as well as support at primary care level, could enhance early presentation and improve cancer outcomes
Surveillance strategies for Classical Swine Fever in wild boar â a comprehensive evaluation study to ensure powerful surveillance
Surveillance of Classical Swine Fever (CSF) should not only focus on livestock, but must also include wild boar. To prevent disease transmission into commercial pig herds, it is therefore vital to have knowledge about the disease status in wild boar. In the present study, we performed a comprehensive evaluation of alternative surveillance strategies for Classical Swine Fever (CSF) in wild boar and compared them with the currently implemented conventional approach. The evaluation protocol was designed using the EVA tool, a decision support tool to help in the development of an economic and epidemiological evaluation protocol for surveillance. To evaluate the effectiveness of the surveillance strategies, we investigated their sensitivity and timeliness. Acceptability was analysed and finally, the cost-effectiveness of the surveillance strategies was determined. We developed 69 surveillance strategies for comparative evaluation between the existing approach and the novel proposed strategies. Sampling only within sub-adults resulted in a better acceptability and timeliness than the currently implemented strategy. Strategies that were completely based on passive surveillance performance did not achieve the desired detection probability of 95%. In conclusion, the results of the study suggest that risk-based approaches can be an option to design more effective CSF surveillance strategies in wild boar
- âŚ