106 research outputs found
Sulfation and carbonation competition in the treatment of flue gas from a coal-based power plant by calcium hydroxide
In this work, a gas containing CO2 and SO2 at the usual concentrations on the coal combustion flue gas reacted with calcium hydroxide to evaluate and quantify the influence of SO2 on the CO2 capture and vice versa. This influence was quantified with a continuous gas analyzer and by thermogravimetry (TG). Results show that the CO2 retained increases in general as its concentration does and decreases as the SO2 concentration increases. A similar behavior was found for the SO2 retention at different CO2 concentrations being more relevant the influence of the presence of SO2 on the CO2 capture than the opposite one. Results suggest that for a high CO2 capture, SO2 should be eliminated previously. With respect to the reaction process it was found that the desulfurization product clearly identified was CaSO3·½H2O; in the reaction between Ca(OH)2 and CO2, CaCO3 is mainly obtained, the complex CaO·CO2 being another possible product synthesized in low amount. Gas analyzer shows that SO2 and CO2 react simultaneously and that a part of the CaCO3 reacts with the SO2 and releases CO2. Sulfation values calculated by TG and from the gas analyzer are very similar but the amount of CO2 captured is not possible to know clearly by TG due to the synthesis and decomposition of CaCO3 during the process. The study of the evolution of the sorbent porosity in the process reveals that the presence of both acid gases produces a lower blockage of the pores than when only one gas is present probably due to the generation of new pores in the reaction of CaCO3 and SO2.We are thankful to MICINN in Spain, National Plan for Scientific Research, Development and Innovation, for financial support under Project: MAT2010-18862 and to the University of Cantabria, Project Ref. 51.VP10.64005
Energy and exergy analysis of chemical looping combustion technology and comparison with pre-combustion and oxy-fuel combustion technologies for CO2 capture
Carbon dioxide (CO2) emitted from conventional coal-based power plants is a growing concern for the environment. Chemical looping combustion (CLC), pre-combustion and oxy-fuel combustion are promising CO2 capture technologies which allow clean electricity generation from coal in an integrated gasification combined cycle (IGCC) power plant. This work compares the characteristics of the above three capture technologies to those of a conventional IGCC plant without CO2 capture. CLC technology is also investigated for two different process configurations—(i) an integrated gasification combined cycle coupled with chemical looping combustion (IGCC–CLC), and (ii) coal direct chemical looping combustion (CDCLC)—using exergy analysis to exploit the complete potential of CLC. Power output, net electrical efficiency and CO2 capture efficiency are the key parameters investigated for the assessment. Flowsheet models of five different types of IGCC power plants, (four with and one without CO2 capture), were developed in the Aspen plus simulation package. The results indicate that with respect to conventional IGCC power plant, IGCC–CLC exhibited an energy penalty of 4.5%, compared with 7.1% and 9.1% for pre-combustion and oxy-fuel combustion technologies, respectively. IGCC–CLC and oxy-fuel combustion technologies achieved an overall CO2 capture rate of ∼100% whereas pre-combustion technology could capture ∼94.8%. Modification of IGCC–CLC into CDCLC tends to increase the net electrical efficiency by 4.7% while maintaining 100% CO2 capture rate. A detailed exergy analysis performed on the two CLC process configurations (IGCC–CLC and CDCLC) and conventional IGCC process demonstrates that CLC technology can be thermodynamically as efficient as a conventional IGCC process
Comparative assessment of gasification based coal power plants with various CO2 capture technologies producing electricity and hydrogen
Seven different types of gasification-based coal conversion processes for producing mainly electricity and in some cases hydrogen (H2), with and without carbon dioxide (CO2) capture, were compared on a consistent basis through simulation studies. The flowsheet for each process was developed in a chemical process simulation tool “Aspen Plus”. The pressure swing adsorption (PSA), physical absorption (Selexol), and chemical looping combustion (CLC) technologies were separately analyzed for processes with CO2 capture. The performances of the above three capture technologies were compared with respect to energetic and exergetic efficiencies, and the level of CO2 emission. The effect of air separation unit (ASU) and gas turbine (GT) integration on the power output of all the CO2 capture cases is assessed. Sensitivity analysis was carried out for the CLC process (electricity-only case) to examine the effect of temperature and water-cooling of the air reactor on the overall efficiency of the process. The results show that, when only electricity production in considered, the case using CLC technology has an electrical efficiency 1.3% and 2.3% higher than the PSA and Selexol based cases, respectively. The CLC based process achieves an overall CO2 capture efficiency of 99.9% in contrast to 89.9% for PSA and 93.5% for Selexol based processes. The overall efficiency of the CLC case for combined electricity and H2 production is marginally higher (by 0.3%) than Selexol and lower (by 0.6%) than PSA cases. The integration between the ASU and GT units benefits all three technologies in terms of electrical efficiency. Furthermore, our results suggest that it is favorable to operate the air reactor of the CLC process at higher temperatures with excess air supply in order to achieve higher power efficiency
The Globalization of Steam Coal Markets and the Role of Logistics: An Empirical Analysis
Syngas Production, Storage, Compression and Use in Gas Turbines
This chapter analyses syngas production through pyrolysis and gasification, its compression and its use in gas turbines. Syngas compression can be performed during or after thermal treatment processes. Important points are discussed related to syngas ignition, syngas explosion limit at high temperatures and high pressures and syngas combustion kinetics. Kinetic aspects influence ignition and final emissions which are obtained at the completion of the combustion process. The chapter is organized into four subsections, dealing with (1) innovative syngas production plants, (2) syngas compressors and compression process, (3) syngas ignition in both heterogeneous and homogeneous systems and (4) syngas combustion kinetics and experimental methods. Particular attention is given to ignition regions that affect the kinetics, namely systems that operate at temperatures higher than 1000 K can have strong ignition, whereas those operating at lower temperatures have weak ignition. Keywords: Pyrogas Pyrolysis Ignition Syngas Compression GasificationacceptedVersio
The development of coal utilisation systems to achieve improved efficiency and reduced environmental impact
SIGLEAvailable from British Library Document Supply Centre-DSC:DXN016436 / BLDSC - British Library Document Supply CentreGBUnited Kingdo
- …