24,591 research outputs found
Effect of Tidal Cycling Rate on the Distribution and Abundance of Nitrogen-Oxidizing Bacteria in a Bench-Scale Fill-and-Drain Bioreactor
Most domestic wastewater can be effectively treated for secondary uses by engineered biological systems. These systems rely on microbial activity to reduce nitrogen (N) content of the reclaimed water. Such systems often employ a tidal-flow process to minimize space requirements for the coupling of aerobic and anaerobic metabolic processes. In this study, laboratory-scale tidal-flow treatment systems were studied to determine how the frequency and duration of tidal cycling may impact reactor performance. Fluorescent in situ hybridization and epifluorescence microscopy were used to enumerate the key functional groups of bacteria responsible for nitrification and anaerobic ammonium oxidation (anammox), and N-removal efficiency was calculated via a mass-balance approach. When water was cycled (i.e., reactors were filled and drained) at high frequencies (16–24 cycles day−1), nitrate accumulated in the columns—presumably due to inadequate periods of anoxia that limited denitrification. At lower frequencies, such as 4 cycles day−1, nearly complete N removal was achieved (80–90%). These fill-and-drain systems enriched heavily for nitrifiers, with relatively few anammox-capable organisms. The microbial community produced was robust, surviving well through short (up to 3 h) anaerobic periods and frequent system-wide perturbation
Laser-assisted transfer for rapid additive micro-fabrication of electronic devices
Laser-based micro-fabrication techniques can be divided into the two broad categories of subtractive and additive processing. Subtractive embraces the well-established areas of ablation, drilling, cutting and trimming, where the substrate material is post-processed into the desired final form or function. Additive describes a manufacturing process that most recently has captured the news in terms of 3-d printing, where materials and structures are assembled from scratch to form complex 3-d objects. While most additive 3-d printing methods are purely aimed at fabrication of structures, the ability to deposit material on the micron-scale enables the creation of functional, e.g. electronic or photonic, devices [1]. Laser-induced forward transfer (LIFT) is a method for the transfer of functional thin film materials with sub-micron to few millimetre feature sizes [2,3]. It has a unique advantage as the materials can be optimised beforehand in terms of their electrical, mechanical or optical properties. LIFT allows the intact transfer of solid, viscous or matrix-embedded films in an additive fashion. As a direct-write method, no lithography or post-processing is required and does not add complexity to existing laser machining systems, thus LIFT can be applied for the rapid and inexpensive fabrication or repair of electronic devices. While the technique is not limited to a specific range of materials, only a few examples show transfer of inorganic semiconductors. So far, LIFT demonstration of materials such as silicon [4,5] have undergone melting, and hence a phase transition process during the transfer which may not be desirable, compromising or reducing the efficiency of a resulting device. Here, we present our first results on the intact transfer of solid thermoelectric semiconductor materials on a millimetre scale via nanosecond excimer laser-based LIFT. We have studied the transfer and its effect on the phase and physical properties of the printed materials and present a working thermoelectric generator as an example of such a device. Furthermore, results from initial experiments to transfer silicon onto polymeric substrates in an intact state via a Ti:sapphire femtosecond laser are also shown, which illustrate the utility of LIFT for printing micron-scale semiconductor features in the context of flexible electronic applications
Digital micromirror devices for laser-based manufacturing
Digital Micromirror Devices (DMDs), containing arrays of around one million individually-controllable ~10µm square mirrors, provide an extremely cost-effective and practical method to modulate the spatial beam profile of a pulsed laser source for both additive and subtractive laser processing and printing. When demagnified by a factor of ~100 in one dimension (hence ~10,000 in area) a ~1mJ/cm2 laser pulse reflected from the mirrors on the DMD surface that are switched to the 'on' position, attains a fluence of ~10J/cm2 at the workpiece, which is more than sufficient to ablate most materials of interest to the laser-manufacturing community. More familiar in the context of high values of magnification by the laser projection industry, reversing the role to use them for equally high values of demagnification opens up a wealth of possibilities for ablation, multiphoton polymerization, security marking and fabrication of features that perhaps surprisingly can be well below the wavelength of the laser used. Of key relevance is that very high-resolution patterning can be achieved by a single laser pulse, and step-and-repeat processes, when combined with the refresh rates of the DMD pattern that are currently at the 30kHz level, open up the possibility of processing areas of up to 1cm2 per second with micron-scale resolution where each ~100µm x 100µm area patterned per pulse can display arbitrary pixelated content. We will discuss the application of DMD-baser laser processing to the following areas of interest to the laser-manufacturing community
Spectroscopic study of unique line broadening and inversion in low-pressure microwave generated water plasmas
It was demonstrated that low pressure (~0.2 Torr) water vapor plasmas
generated in a 10 mm inner diameter quartz tube with an Evenson microwave
cavity show at least two features which are not explained by conventional
plasma models. First, significant (> 0.25 nm) hydrogen Balmer_ line broadening,
of constant width, up to 5 cm from the microwave coupler was recorded. Only
hydrogen, and not oxygen, showed significant line broadening. This feature,
observed previously in hydrogen-containing mixed gas plasmas generated with
high voltage dc and rf discharges was explained by some researchers to result
from acceleration of hydrogen ions near the cathode. This explanation cannot
apply to the line broadening observed in the (electrodeless) microwave plasmas
generated in this work, particularly at distances as great as 5 cm from the
microwave coupler. Second, inversion of the line intensities of both the Lyman
and Balmer series, again, at distances up to 5 cm from the coupler, were
observed. The line inversion suggests the existence of a hitherto unknown
source of pumping of the optical power in plasmas. Finally, it is notable that
other aspects of the plasma including the OH* rotational temperature and low
electron concentrations are quite typical of plasmas of this type.Comment: 27 pages, 7 figure
A capacitor‐discharge mechanism to explain the timing of orogeny‐related global glaciations
Over geological timescales, mountain building or orogenesis is associated with increased weathering, the drawdown of atmospheric CO2, and global cooling. However, a multimillion‐year delay appears to exist between peaks in low‐latitude mountain uplift and the maximum extent of Phanerozoic glaciation, implying a more complex causal relationship between the two. Here we show that global silicate weathering can be modulated by orogeny in three distinct phases. High, young mountain belts experience preferential precipitation and the highest erosion. As mountains are denuded, precipitation decreases, but runoff temperature rises, sharply increasing chemical weathering potential and CO2 drawdown. In the final phase, erosion and weathering are throttled by flatter topography. We conclude that orogeny acts as a capacitor in the climate system, granting the potential for intense transient CO2 drawdown when mountain ranges are denuded; the mechanism suggests such a scenario potentially happening 10‐50 million years in the future
Magnon Mediated Electric Current Drag Across a Ferromagnetic Insulator Layer
In a semiconductor hererostructure, the Coulomb interaction is responsible
for the electric current drag between two 2D electron gases across an electron
impenetrable insulator. For two metallic layers separated by a ferromagnetic
insulator (FI) layer, the electric current drag can be mediated by a
nonequilibrium magnon current of the FI. We determine the drag current by using
the semiclassical Boltzmann approach with proper boundary conditions of
electrons and magnons at the metal-FI interface.Comment: 13 pages, 2 figures: to appear in PR
Rapid and mask-less laser-processing technique for the fabrication of microstructures in polydimethylsiloxane
We report a rapid laser-based method for structuring polydimethylsiloxane (PDMS) on the micron-scale. This mask-less method uses a digital multi-mirror device as a spatial light modulator to produce a given spatial intensity pattern to create arbitrarily shaped structures via either ablation or multi-photon photo-polymerisation in a master substrate, which is subsequently used to cast the complementary patterns in PDMS. This patterned PDMS mould was then used for micro-contact printing of ink and biological molecules
Radio Observations of the Supernova Remnant Candidate G312.5-3.0
The radio images from the Parkes-MIT-NRAO (PMN) Southern Sky Survey at 4850
MHz have revealed a number of previously unknown radio sources. One such
source, G312.5-3.0 (PMN J1421-6415), has been observed using the
multi-frequency capabilities of the Australia Telescope Compact Array (ATCA) at
frequencies of 1380 MHz and 2378 MHz. Further observations of the source were
made using the Molonglo Observatory Synthesis Telescope (MOST) at a frequency
of 843 MHz. The source has an angular size of 18 arcmin and has a distinct
shell structure. We present the reduced multi-frequency observations of this
source and provide a brief argument for its possible identification as a
supernova remnant.Comment: 5 pages, 5 figures, Accepted for publication in MNRA
- …