401 research outputs found

    X-ray film holder permits single continuous picture of tubing joint

    Get PDF
    X ray technique produces a clear continuous picture of a welded brazed tubing joint on a single film with one exposure. A stationary X ray source located in the plane of the joint to be inspected, a means of rotating the tube, and a unique internal film holder and positioning fixture are used

    Apparent-Strain Correction for Combined Thermal and Mechanical Testing

    Get PDF
    Combined thermal and mechanical testing requires that the total strain be corrected for the coefficient of thermal expansion mismatch between the strain gage and the specimen or apparent strain when the temperature varies while a mechanical load is being applied. Collecting data for an apparent strain test becomes problematic as the specimen size increases. If the test specimen cannot be placed in a variable temperature test chamber to generate apparent strain data with no mechanical loads, coupons can be used to generate the required data. The coupons, however, must have the same strain gage type, coefficient of thermal expansion, and constraints as the specimen to be useful. Obtaining apparent-strain data at temperatures lower than -320 F is challenging due to the difficulty to maintain steady-state and uniform temperatures on a given specimen. Equations to correct for apparent strain in a real-time fashion and data from apparent-strain tests for composite and metallic specimens over a temperature range from -450 F to +250 F are presented in this paper. Three approaches to extrapolate apparent-strain data from -320 F to -430 F are presented and compared to the measured apparent-strain data. The first two approaches use a subset of the apparent-strain curves between -320 F and 100 F to extrapolate to -430 F, while the third approach extrapolates the apparent-strain curve over the temperature range of -320 F to +250 F to -430 F. The first two approaches are superior to the third approach but the use of either of the first two approaches is contingent upon the degree of non-linearity of the apparent-strain curve

    Mir-223 regulates the number and function of myeloid-derived suppressor cells in multiple sclerosis and experimental autoimmune encephalomyelitis

    Get PDF
    Myeloid-derived cells play important modulatory and effector roles in multiple sclerosis (MS) and its animal model, experimental autoimmune encephalomyelitis (EAE). Myeloid-derived suppressor cells (MDSCs) are immature myeloid cells, composed of monocytic (MO) and polymorphonuclear (PMN) fractions, which can suppress T cell activities in EAE. Their role in MS remains poorly characterized. We found decreased numbers of circulating MDSCs, driven by lower frequencies of the MO-MDSCs, and higher MDSC expression of microRNA miR-223 in MS versus healthy subjects. To gain mechanistic insights, we interrogated the EAE model. MiR-223 knock out (miR-223 12/ 12) mice developed less severe EAE with increased MDSC numbers in the spleen and spinal cord compared to littermate controls. MiR-223 12/ 12 MO-MDSCs suppressed T cell proliferation and cytokine production in vitro and EAE in vivo more than wild-type MO-MDSCs. They also displayed an increased expression of critical mediators of MDSC suppressive function, Arginase-1(Arg1), and the signal transducer and activator of transcription 3 (Stat3), which herein, we demonstrate being an miR-223 target gene. Consistently, MDSCs from MS patients displayed decreased STAT3 and ARG1 expression compared with healthy controls, suggesting that circulating MDSCs in MS are not only reduced in numbers but also less suppressive. These results support a critical role for miR-223 in modulating MDSC biology in EAE and in MS and suggest potential novel therapeutic applications

    Source Mechanism of Small Long-Period Events at Mount St. Helens in July 2005 Using Template Matching, Phase-Weighted Stacking, and Full-Waveform Inversion

    Get PDF
    Long-period (LP, 0.5-5 Hz) seismicity, observed at volcanoes worldwide, is a recognized signature of unrest and eruption. Cyclic LP “drumbeating” was the characteristic seismicity accompanying the sustained dome-building phase of the 2004–2008 eruption of Mount St. Helens (MSH), WA. However, together with the LP drumbeating was a near-continuous, randomly occurring series of tiny LP seismic events (LP “subevents”), which may hold important additional information on the mechanism of seismogenesis at restless volcanoes. We employ template matching, phase-weighted stacking, and full-waveform inversion to image the source mechanism of one multiplet of these LP subevents at MSH in July 2005. The signal-to-noise ratios of the individual events are too low to produce reliable waveform inversion results, but the events are repetitive and can be stacked. We apply network-based template matching to 8 days of continuous velocity waveform data from 29 June to 7 July 2005 using a master event to detect 822 network triggers. We stack waveforms for 359 high-quality triggers at each station and component, using a combination of linear and phase-weighted stacking to produce clean stacks for use in waveform inversion. The derived source mechanism points to the volumetric oscillation (∌10 m3) of a subhorizontal crack located at shallow depth (∌30 m) in an area to the south of Crater Glacier in the southern portion of the breached MSH crater. A possible excitation mechanism is the sudden condensation of metastable steam from a shallow pressurized hydrothermal system as it encounters cool meteoric water in the outer parts of the edifice, perhaps supplied from snow melt

    Bibliometric Analysis of Gender Authorship Trends and Collaboration Dynamics over 30 Years of Spine 1985 to 2015

    Get PDF
    Study Design. A bibliometric analysis. Objective. The aim of this article was to study bibliometric changes over the last 30 years of Spine. These trends are important regarding academic publication productivity. Summary of Background Data. Inflation in authorship number and other bibliometric variables has been described in the scientific literature. The issue of author gender is taking on increasing importance, as efforts are being made to close the gender gap. Methods. From 1985 to 2015, 10-year incremental data for several bibliometric variables were collected, including author gender. Standard bivariate statistical analyses were performed. Trends over time were assessed by the Cochran linear trend. A P < 0.05 was considered statistically significant. Results. Inclusion criteria were met for 1566 manuscripts. The majority of the manuscripts were from North America (51.2%), Europe (25.2%), and Asia (20.8%). The number of manuscripts, authors, countries, pages, and references all increased from 1985 to 2015. There was a slight increase in female first authors over time (17.5% to 18.4%, P = 0.048). There was no gender change over time for corresponding authors (14.3% to 14.0%, P = 0.29). There was an 88% increase in the percentage of female first authors having male corresponding authors (P = 0.00004), and a 123% increase in male first authors having female corresponding authors (P = 0.0002). The 14% to 18% of female authors in Spine is higher than the ∌5% female membership of the Scoliosis Research Society and North American Spine Society. Conclusion. Manuscripts in Spine over the past 30 years have shown a significant increase in the number of authors, collaborating institutions and countries, printed pages, references, and number of times each manuscript was cited. There has been a mild increase in female first authorship, but none in corresponding authorship. Increases in female authorship will likely require recruitment of more females into the discipline rather than providing females in the discipline with authorship opportunities. Level of Evidence: N/

    Agenda Setting And Bargaining Power: The Mexican State Versus Transnational Automobile Corporations

    Get PDF
    The authors explore the often conflictual bargaining relations between transnational corporations and host governments of less developed countries. They focus particular attention on the conflict that surrounded the creation of the Mexican automobile industry (1960-1964), criticizing and reformulating a current approach to these issues. The argument proceeds in two parts--agenda setting and bargaining power. Each part is organized around a central criticism of the bargaining power approach and provides an alternative formulation which is then applied to an analysis of the bargaining relationship between the Mexican Government and the transnational automobile corporations

    Degradation of a benzene–toluene mixture by hydrocarbon-adapted bacterial communities

    Get PDF
    We examined the rate of degradation of a benzene–toluene mixture in aerobic microcosms prepared with samples of an aquifer that lies below a petrochemical plant (SIReN, UK). Five samples exposed to different concentrations of benzene (from 0.6 to 317 mg l−1) were used. Fast degradation (approx. 1–6 mg l−1 day−1) of both contaminants was observed in all groundwater samples and complete degradation was recorded by the seventh day except for one sample. We also identified the microbial community in each of the samples by culture-independent techniques. Two of the less impacted samples harbour the aerobic benzene degrader Pseudomonas fluorescens, while Acidovorax and Arthrobacter spp. were found in the most polluted sample and are consistent with the population observed in situ. Hydrogenophaga was found in the deepest sample while Rhodoferax spp. were recovered in an alkaline sample (pH 8.4) and may also be implicated in benzene degradation. Time series analysis shows that each of the samples has a different community but they remain stable over the degradation period. This study provides new information on a well not previously studied (no. 309s) and confirms that adapted communities have the ability to degrade hydrocarbon mixtures and could be used in further bioaugmentation approaches in contaminated sites
    • 

    corecore