Introduction of an adhesion factor to cube in cube models and its effect on calculated moduli of particulate composites

The cube in cube approach was used by Paul and Ishai-Cohen to model and derive formulas for filler content dependent Young's moduli of particle filled composites assuming perfect filler matrix adhesion. Their formulas were chosen because of their simplicity, and recalculated using an elementary volume approach which transforms spherical inclusions to cubic inclusions. The EV approach led to expression of the composites moduli that allows introducing an adhesion factor kadh ranging from 0 and 1 to take into account reduced filler matrix adhesion. This adhesion factor scales the edge length of the cubic inclusions, thus reducing the stress transfer area between matrix and filler. Fitting the experimental data with the modified Paul model provides reasonable kadh for PA66, PBT, PP, PE-LD and BR which are in line with their surface energies. Further analysis showed that stiffening only occurs if kadh exceeds [Formula: see text] and depends on the ratio of matrix modulus and filler modulus. The modified model allows for a quick calculation of any particle filled composites for known matrix modulus EM, filler modulus EF, filler volume content vF and adhesion factor kadh. Thus, finite element analysis (FEA) simulations of any particle filled polymer parts as well as materials selection are significantly eased. FEA of cubic and hexagonal EV arrangements show that stress distributions within the EV exhibit more shear stresses if one deviates from the cubic arrangement. At high filler contents the assumption that the property of the EV is representative for the whole composite, holds only for filler volume contents up to 15 or 20% (corresponding to 30 to 40 weight %). Thus, for vast majority of commercially available particulate composites, the modified model can be applied. Furthermore, this indicates that the cube in cube approach reaches two limits: (i) the occurrence of increasing shear stresses at filler contents above 20% due to deviations of EV arrangements or spatial filler distribution from cubic arrangements (singular), and (ii) increasing interaction between particles with the formation of particle network within the matrix violating the EV assumption of their homogeneous dispersion

A novel multiparametric imaging approach to acute myocarditis using T2-mapping and CMR feature tracking

Background: The aim of this study was to evaluate the diagnostic potential of a novel cardiovascular magnetic resonance (CMR) based multiparametric imaging approach in suspected myocarditis and to compare it to traditional Lake Louise criteria (LLC). Methods: CMR data from 67 patients with suspected acute myocarditis were retrospectively analyzed. Seventeen age- and gender-matched healthy subjects served as control. T2-mapping data were acquired using a Gradient-Spin-Echo T2-mapping sequence in short-axis orientation. T2-maps were segmented according to the 16-segments AHA-model and segmental T2 values and pixel-standard deviation (SD) were recorded. Afterwards, the parameters maxT2 (the highest segmental T2 value) and madSD (the mean absolute deviation (MAD) of the pixel-SDs) were calculated for each subject. Cine sequences in three long axes and a stack of short-axis views covering the left and right ventricle were analyzed using a dedicated feature tracking algorithm. Results: A multiparametric imaging model containing madSD and LV global circumferential strain (GCSLV) resulted in the highest diagnostic performance in receiver operating curve analyses (area under the curve [AUC] 0.84) when compared to any model containing a single imaging parameter or to LLC (AUC 0.79). Adding late gadolinium enhancement (LGE) to the model resulted in a further increased diagnostic performance (AUC 0.93) and yielded the highest diagnostic sensitivity of 97% and specificity of 77%. Conclusions: A multiparametric CMR imaging model including the novel T2-mapping derived parameter madSD, the feature tracking derived strain parameter GCSLV and LGE yields superior diagnostic sensitivity in suspected acute myocarditis when compared to any imaging parameter alone and to LLC. © 2017 The Author(s)

Introduction of an adhesion factor to cube in cube models and its effect on calculated moduli of particulate composites

The cube in cube approach was used by Paul and Ishai-Cohen to model and derive formulas for filler content dependent Young's moduli of particle filled composites assuming perfect filler matrix adhesion. Their formulas were chosen because of their simplicity, and recalculated using an elementary volume approach which transforms spherical inclusions to cubic inclusions. The EV approach led to expression of the composites moduli that allows introducing an adhesion factor kadh ranging from 0 and 1 to take into account reduced filler matrix adhesion. This adhesion factor scales the edge length of the cubic inclusions, thus reducing the stress transfer area between matrix and filler. Fitting the experimental data with the modified Paul model provides reasonable k(adh) for PA66, PBT, PP, PE-LD and BR which are in line with their surface energies. Further analysis showed that stiffening only occurs if k(adh) exceeds root E-M/E-F and depends on the ratio of matrix modulus and filler modulus. The modified model allows for a quick calculation of any particle filled composites for known matrix modulus E-M, filler modulus E-F, filler volume content v(F) and adhesion factor k(adh). Thus, finite element analysis (FEA) simulations of any particle filled polymer parts as well as materials selection are significantly eased. FEA of cubic and hexagonal EV arrangements show that stress distributions within the EV exhibit more shear stresses if one deviates from the cubic arrangement. At high filler contents the assumption that the property of the EV is representative for the whole composite, holds only for filler volume contents up to 15 or 20% (corresponding to 30 to 40 weight %). Thus, for vast majority of commercially available particulate composites, the modified model can be applied. Furthermore, this indicates that the cube in cube approach reaches two limits: (i) the occurrence of increasing shear stresses at filler contents above 20% due to deviations of EV arrangements or spatial filler distribution from cubic arrangements (singular), and (ii) increasing interaction between particles with the formation of particle network within the matrix violating the EV assumption of their homogeneous dispersion.Ministry of Education, Youth and Sports of the Czech Republic-DKRVO [RP/CPS/2022/003

Introduction of an adhesion factor to cube in cube models and its effect on calculated moduli of particulate composites

The cube in cube approach was used by Paul and Ishai-Cohen to model and derive formulas for filler content dependent Young's moduli of particle filled composites assuming perfect filler matrix adhesion. Their formulas were chosen because of their simplicity, and recalculated using an elementary volume approach which transforms spherical inclusions to cubic inclusions. The EV approach led to expression of the composites moduli that allows introducing an adhesion factor kadh ranging from 0 and 1 to take into account reduced filler matrix adhesion. This adhesion factor scales the edge length of the cubic inclusions, thus reducing the stress transfer area between matrix and filler. Fitting the experimental data with the modified Paul model provides reasonable kadh for PA66, PBT, PP, PE-LD and BR which are in line with their surface energies. Further analysis showed that stiffening only occurs if kadh exceeds [Formula: see text] and depends on the ratio of matrix modulus and filler modulus. The modified model allows for a quick calculation of any particle filled composites for known matrix modulus EM, filler modulus EF, filler volume content vF and adhesion factor kadh. Thus, finite element analysis (FEA) simulations of any particle filled polymer parts as well as materials selection are significantly eased. FEA of cubic and hexagonal EV arrangements show that stress distributions within the EV exhibit more shear stresses if one deviates from the cubic arrangement. At high filler contents the assumption that the property of the EV is representative for the whole composite, holds only for filler volume contents up to 15 or 20% (corresponding to 30 to 40 weight %). Thus, for vast majority of commercially available particulate composites, the modified model can be applied. Furthermore, this indicates that the cube in cube approach reaches two limits: (i) the occurrence of increasing shear stresses at filler contents above 20% due to deviations of EV arrangements or spatial filler distribution from cubic arrangements (singular), and (ii) increasing interaction between particles with the formation of particle network within the matrix violating the EV assumption of their homogeneous dispersion. © 2022. The Author(s)

Butyrylcholinesterase as a perioperative complication marker in patients after transcatheter aortic valve implantation: a prospective observational study

Objectives Transcatheter aortic valve implantation (TAVI) is performed in elderly patients with severe aortic valve stenosis and increased operative risks. We tested the hypothesis that acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) have a predictive value for prevalent complications after TAVI and could serve as indicators of systemic inflammation in the early postoperative period

Bacterial Infection of an Alveolar Echinococcus Cyst from C. perfringens Septicemia: A Case Report and Review of the Literature

Background and Objectives: Alveolar echinococcosis (AE) is a highly variable disease able to present as structurally diverse cysts in different organs based on the host’s immunological state as well as the time between diagnosis and the primary infection. Bacterial superinfections, especially with anaerobic pathogens from the Clostridiaceae genus, can further alter the radiological findings due to pneumobilia, newly formed abscess formations, and inflammatory changes. Materials and Methods: We present a case of a 71-year-old Caucasian male admitted to our intensive care unit with septic shock, pneumobilia, and a complex cyst of the liver with calcification, as shown by an initial CT. Because of the septic shock, the patient was started on broad-band antibiotics. Clostridiaceae infection was considered an important differential diagnosis due to the presence of pneumobilia observed in the initial CT, without a history of previous endoscopy. Furthermore, serology for echinococcus was positive, and blood cultures showed growth of C. perfringens. Therefore, the patient was additionally treated with albendazole. After recovery, further staging was conducted, showing complete remission of the cyst and a left-over lesion classified as Alveolar Echinococcosis Ulm Classification (AEUC) V. In summary, the patient had a pre-existing, controlled AE infection that became superinfected with C. perfringens, likely attributable to the anaerobic necrotic tissue, leading to septicemia. Results: The anaerobic tissue within the AE cyst provided an ideal medium for C. perfringens to replicate, leading to cyst infection, which subsequently caused septic shock and pneumobilia. The initial findings from CT and MRI were confounded by the superinfection, demonstrating the diagnostic challenges of AE, especially when presenting with complications. Conclusions: Diagnosing AE remains a demanding task, even with the excellent tools available through serology, coupled with CT, FDG-PET-CT, and MRI. Notably, older superinfected cysts can pose difficulties when integrated into the appropriate diagnostic context. Prompt diagnosis is critical for the accurate treatment of echinococcosis and its complications, such as bacterial superinfections. From a clinical perspective, septicemia from Clostridiaceae and infections with C. perfringens—pathogens capable of inducing pneumobilia—should be regarded as significant differential diagnoses for pneumobilia in the absence of a recent history of endoscopy

Profiling of WDR36 Missense Variants in German Patients with Glaucoma

PURPOSE. Mutations in WDR36 were recently reported in patients with adult-onset primary open-angle glaucoma (POAG). In this study, the prevalence of WDR36 variants was investigated in patients with glaucoma who were of German descent with diverse age of onset and intraocular pressure levels. METHODS. Recruited were 399 unrelated patients with glaucoma and 376 healthy subjects of comparable age and origin, who had had repeated normal findings in ophthalmic examinations. The frequency of observed variants was obtained by direct sequencing of the entire WDR36 coding region. RESULTS. A total of 44 WDR36 allelic variants were detected, including 14 nonsynonymous amino acid alterations, of which 7 are novel (P31T, Y97C, D126N, T403A, H411Y, H411L, and P487R) and 7 have been reported (L25P, D33E, A163V, H212P, A449T, D658G and I264V). Of these 14 variants, 6 were classified as polymorphisms as they were detected in patients and control individuals at similar frequencies. Eight variants present in 15 patients (3.7%) but only 1 control individual (0.2%) were defined as putative disease-causing variants (P 0.0005). Within this patient group, 12 (80%) presented with high and 3 (20%) with low intraocular pressure. Disease severity and age of onset showed a broad range. CONCLUSIONS. The occurrence of several rare putative diseasecausing variants in patients with glaucoma suggests that WDR36 may be a minor disease-causing gene in glaucoma, at least in the German population. The large variability in WDR36, though, requires functional validation of these variants, once its function is characterized.UCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Básicas::Centro de Investigación en Biología Celular y Molecular (CIBCM)UCR::Vicerrectoría de Docencia::Ciencias Básicas::Facultad de Ciencias::Escuela de Biologí

Heterozygous Loss-of-Function Variants in CYP1B1 Predispose to Primary Open-Angle Glaucoma

Purpose.: Although primary congenital glaucoma (PCG)–associated CYP1B1 mutations in the heterozygous state have been evaluated for association with primary open-angle glaucoma (POAG) in several small studies, their contribution to the occurrence of POAG is still controversial. The present study was conducted to determine whether heterozygous functionally characterized CYP1B1 mutations are associated with the disease in a large cohort of German patients with POAG. Methods.: The frequency of CYP1B1 variants on direct sequencing of the entire coding region was compared in 399 unrelated German patients with POAG (270, POAG; 47, JOAG; and 82, NTG) and 376 control subjects without any signs of glaucoma on ophthalmic examination. In vitro functional assays were performed and relative enzymatic activity of the CYP1B1 variants embedded in their respective background haplotypes and not previously unambiguously classified were determined, to assess their possible causative role. Results.: Apart from known polymorphic variants, 11 amino acid substitutions in CYP1B1 reported before, both in PCG and POAG cases, were identified. After in vitro functional assay, variants P52L and R368H showed marked reduction of activity, confirming their role as loss-of-function mutations similar to previously determined variants G61E, N203S, and G329V. In contrast, variants G168D, A443G, and A465V showed no relevant effects and were thus classified as polymorphisms. Overall, seven functionally impaired variants were present in 13 (3.6%) patients and in 1 (0.2%) control subject (P = 0.002, OR = 5.4). Reanalysis of previous studies reporting CYP1B1 mutations in patients with POAG based on updated functional validation showed a significant excess of carriers among patients compared to controls (OR = 3.85; P = 2.3 × 10−7). Conclusions.: Heterozygous CYP1B1 mutations with absent or reduced relative enzymatic activity can be considered a risk factor for POAG.German Research Foundation/[WE1259/14-3]/DFG/GermanyGerman Research Foundation/[SFB-539]/DFG/GermanyUCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Básicas::Centro de Investigación en Biología Celular y Molecular (CIBCM

Exploiting the 2-Amino-1,3,4-thiadiazole Scaffold To Inhibit <i>Trypanosoma brucei </i>Pteridine Reductase in Support of Early-Stage Drug Discovery

Pteridine reductase-1 (PTR1) is a promising drug target for the treatment of trypanosomiasis. We investigated the potential of a previously identified class of thiadiazole inhibitors of Leishmania major PTR1 for activity against Trypanosoma brucei (Tb). We solved crystal structures of several TbPTR1-inhibitor complexes to guide the structure-based design of new thiadiazole derivatives. Subsequent synthesis and enzyme- and cell-based assays confirm new, mid-micromolar inhibitors of TbPTR1 with low toxicity. In particular, compound 4m, a biphenyl-thiadiazole-2,5-diamine with IC50 = 16 μM, was able to potentiate the antitrypanosomal activity of the dihydrofolate reductase inhibitor methotrexate (MTX) with a 4.1-fold decrease of the EC50 value. In addition, the antiparasitic activity of the combination of 4m and MTX was reversed by addition of folic acid. By adopting an efficient hit discovery platform, we demonstrate, using the 2-amino-1,3,4-thiadiazole scaffold, how a promising tool for the development of anti-T. brucei agents can be obtained