116 research outputs found

    The Karlsruhe temperature time series since 1779

    Get PDF
    This paper presents the long-term Karlsruhe temperature series re-digitized and reconstructed from handwritten manuscripts from 1779 to 1875 archived in various libraries. Despite great efforts, data from some periods remained missing in the manuscript departments so that the main Karlsruhe series remained partially fragmented. Combined with historic climate records available in the archive of German Weather Service (DWD), the entire series until 2008, when the official Karlsruhe station was relocated to Rheinstetten, is one of the longest climate series available for Germany. The series includes various observational parameters on a daily or even sub-daily basis converted into SI units or contemporary units. The focus of this paper is on the temperature series and presents some first statistical analyses to demonstrate the additional benefit of possessing unique long-term instrumental climate data on a sub-daily basis. The entire temperature series was homogenized with respect to consistent observation times and to an urban boundary site. It is shown that the width of the distribution function quantified from constructed daily maximum and minimum temperature has substantially broadened in the summer months, but not during winter or the entire year. The number of summer and hot days has substantially increased in the last 30–50 years, while the number of frost and ice days has decreased. Summer or hot days as well as heat waves were very rare before 1920, being unrepresentative of a period mainly unaffected by climate change. Singularities of the climate system, such as the (cold) Schafskälte in June or the (warm) Hundstage in July/August, are clearly shown in most periods. The (cold) Ice Saints in May, however, have a high frequency only in the coldest period between 1870 and 1960; they are hardly detectable in most of the preceding years. Temperature statistics show that the severity of late spring frosts has gradually increased during the entire record mainly as a result of later frost occurrences

    A prospective observational study

    Get PDF
    Background: Severe bacterial infections remain a major challenge in intensive care units because of their high prevalence and mortality. Adequate antibiotic exposure has been associated with clinical success in critically ill patients. The objective of this study was to investigate the target attainment of standard meropenem dosing in a heterogeneous critically ill population, to quantify the impact of the full renal function spectrum on meropenem exposure and target attainment, and ultimately to translate the findings into a tool for practical application. Methods: A prospective observational single-centre study was performed with critically ill patients with severe infections receiving standard dosing of meropenem. Serial blood samples were drawn over 4 study days to determine meropenem serum concentrations. Renal function was assessed by creatinine clearance according to the Cockcroft and Gault equation (CLCRCG). Variability in meropenem serum concentrations was quantified at the middle and end of each monitored dosing interval. The attainment of two pharmacokinetic/pharmacodynamic targets (100%T>MIC, 50%T>4×MIC) was evaluated for minimum inhibitory concentration (MIC) values of 2 mg/L and 8 mg/L and standard meropenem dosing (1000 mg, 30-minute infusion, every 8 h). Furthermore, we assessed the impact of CLCRCG on meropenem concentrations and target attainment and developed a tool for risk assessment of target non- attainment. Results: Large inter- and intra-patient variability in meropenem concentrations was observed in the critically ill population (n = 48). Attainment of the target 100%T>MIC was merely 48.4% and 20.6%, given MIC values of 2 mg/L and 8 mg/L, respectively, and similar for the target 50%T>4×MIC. A hyperbolic relationship between CLCRCG (25–255 ml/ minute) and meropenem serum concentrations at the end of the dosing interval (C8h) was derived. For infections with pathogens of MIC 2 mg/L, mild renal impairment up to augmented renal function was identified as a risk factor for target non- attainment (for MIC 8 mg/L, additionally, moderate renal impairment). Conclusions: The investigated standard meropenem dosing regimen appeared to result in insufficient meropenem exposure in a considerable fraction of critically ill patients. An easy- and free-to-use tool (the MeroRisk Calculator) for assessing the risk of target non-attainment for a given renal function and MIC value was developed

    Role of renal function in risk assessment of target non-attainment after standard dosing of meropenem in critically ill patients: a prospective observational study

    Get PDF
    Background: Severe bacterial infections remain a major challenge in intensive care units because of their high prevalence and mortality. Adequate antibiotic exposure has been associated with clinical success in critically ill patients. The objective of this study was to investigate the target attainment of standard meropenem dosing in a heterogeneous critically ill population, to quantify the impact of the full renal function spectrum on meropenem exposure and target attainment, and ultimately to translate the findings into a tool for practical application. Methods: A prospective observational single-centre study was performed with critically ill patients with severe infections receiving standard dosing of meropenem. Serial blood samples were drawn over 4 study days to determine meropenem serum concentrations. Renal function was assessed by creatinine clearance according to the Cockcroft and Gault equation (CLCRCG). Variability in meropenem serum concentrations was quantified at the middle and end of each monitored dosing interval. The attainment of two pharmacokinetic/pharmacodynamic targets 100%T >MIC,50%T >4×MIC) was evaluated for minimum inhibitory concentration (MIC) values of 2 mg/L and 8 mg/L and standard meropenem dosing (1000 mg, 30-minute infusion, every 8 h). Furthermore, we assessed the impact of CLCRCG on meropenem concentrations and target attainment and developed a tool for risk assessment of target non-attainment. Results: Large inter- and intra-patient variability in meropenem concentrations was observed in the critically ill population (n = 48). Attainment of the target 100%T >MIC was merely 48.4% and 20.6%, given MIC values of 2 mg/L and 8 mg/L, respectively, and similar for the target 50%T >4×MIC. A hyperbolic relationship between CLCRCG (25–255 ml/minute) and meropenem serum concentrations at the end of the dosing interval (C8h) was derived. For infections with pathogens of MIC 2 mg/L, mild renal impairment up to augmented renal function was identified as a risk factor for target non-attainment (for MIC 8 mg/L, additionally, moderate renal impairment). Conclusions: The investigated standard meropenem dosing regimen appeared to result in insufficient meropenem exposure in a considerable fraction of critically ill patients. An easy- and free-to-use tool (the MeroRisk Calculator) for assessing the risk of target non-attainment for a given renal function and MIC value was developed. Trial registration Clinicaltrials.gov, NCT01793012 . Registered on 24 January 2013

    Consensus care recommendations for alfapump® in cirrhotic patients with refractory or recurrent ascites

    Get PDF
    BACKGROUND: The alfapump® is an implantable class III medical device that pumps ascitic fluid from the peritoneal space to the urinary bladder from where it is excreted. The pump reduces or abrogates the need for repeated paracentesis in patients with recurrent or refractory ascites. AIMS: To improve outcomes for alfapump® implantation and pre- and post-implant patient management in both clinical trial and real-world settings by development of consensus recommendations. METHODS: The alfapump® working group consisting of hepatologists and surgeons with extensive experience in implantation of the alfapump® and patient management met on two occasions: (1) to determine the key areas where recommendations should be made; and (2) to discuss the experiences of the working group within those areas and formulate draft statements. Developed statements were submitted to the group and consensus sought on relevance and wording through a collaborative iterative approach in order to consolidate the recommendations into consensus statements. Only recommendations agreed upon unanimously were included. RESULTS: Twenty-three consensus recommendations were developed in the areas of pre-implantation procedure, (three statements), surgical implant procedure (11 statements), immediate post-implant care (three statements) and long-term management (six statements). CONCLUSIONS: The consensus statements are a valuable reference resource for physicians managing patients with the alfapump® and for those considering management strategies for patients with refractory ascites

    Consensus care recommendations for alfapump® in cirrhotic patients with refractory or recurrent ascites.

    Get PDF
    BACKGROUND The alfapump® is an implantable class III medical device that pumps ascitic fluid from the peritoneal space to the urinary bladder from where it is excreted. The pump reduces or abrogates the need for repeated paracentesis in patients with recurrent or refractory ascites. AIMS To improve outcomes for alfapump® implantation and pre- and post-implant patient management in both clinical trial and real-world settings by development of consensus recommendations. METHODS The alfapump® working group consisting of hepatologists and surgeons with extensive experience in implantation of the alfapump® and patient management met on two occasions: (1) to determine the key areas where recommendations should be made; and (2) to discuss the experiences of the working group within those areas and formulate draft statements. Developed statements were submitted to the group and consensus sought on relevance and wording through a collaborative iterative approach in order to consolidate the recommendations into consensus statements. Only recommendations agreed upon unanimously were included. RESULTS Twenty-three consensus recommendations were developed in the areas of pre-implantation procedure, (three statements), surgical implant procedure (11 statements), immediate post-implant care (three statements) and long-term management (six statements). CONCLUSIONS The consensus statements are a valuable reference resource for physicians managing patients with the alfapump® and for those considering management strategies for patients with refractory ascites

    Quality assurance guidelines for superficial hyperthermia clinical trials: II. Technical requirements for heating devices

    Get PDF
    Quality assurance (QA) guidelines are essential to provide uniform execution of clinical trials with uniform quality hyperthermia treatments. This document outlines the requirements for appropriate QA of all current superficial heating equipment including electromagnetic (radiative and capacitive), ultrasound, and infrared heating techniques. Detailed instructions are provided how to characterize and document the performance of these hyperthermia applicators in order to apply reproducible hyperthermia treatments of uniform high quality. Earlier documents used specific absorption rate (SAR) to define and characterize applicator performance. In these QA guidelines, temperature rise is the leading parameter for characterization of applicator performance. The intention of this approach is that characterization can be achieved with affordable equipment and easy-to-implement procedures. These characteristics are essential to establish for each individual applicator the specific maximum size and depth of tumors that can be heated adequately. The guidelines in this document are supplemented with a second set of guidelines focusing on the clinical application. Both sets of guidelines were developed by the European Society for Hyperthermic Oncology (ESHO) Technical Committee with participation of senior Society of Thermal Medicine (STM) members and members of the Atzelsberg Circle

    Association of Interprofessional Discharge Planning Using an Electronic Health Record Tool With Hospital Length of Stay Among Patients with Multimorbidity: A Nonrandomized Controlled Trial

    Get PDF
    Whether interprofessional collaboration is effective and safe in decreasing hospital length of stay remains controversial.; To evaluate the outcomes and safety associated with an electronic interprofessional-led discharge planning tool vs standard discharge planning to safely reduce length of stay among medical inpatients with multimorbidity.; This multicenter prospective nonrandomized controlled trial used interrupted time series analysis to examine medical acute hospitalizations at 82 hospitals in Switzerland. It was conducted from February 2017 through January 2019. Data analysis was conducted from March 2021 to July 2022.; After a 12-month preintervention phase (February 2017 through January 2018), an electronic interprofessional-led discharge planning tool was implemented in February 2018 in 7 intervention hospitals in addition to standard discharge planning.; Mixed-effects segmented regression analyses were used to compare monthly changes in trends of length of stay, hospital readmission, in-hospital mortality, and facility discharge after the implementation of the tool with changes in trends among control hospitals.; There were 54 695 hospitalizations at intervention hospitals, with 27 219 in the preintervention period (median [IQR] age, 72 [59-82] years; 14 400 [52.9%] men) and 27 476 in the intervention phase (median [IQR] age, 72 [59-82] years; 14 448 [52.6%] men) and 438 791 at control hospitals, with 216 261 in the preintervention period (median [IQR] age, 74 [60-83] years; 109 770 [50.8%] men) and 222 530 in the intervention phase (median [IQR] age, 74 [60-83] years; 113 053 [50.8%] men). The mean (SD) length of stay in the preintervention phase was 7.6 (7.1) days for intervention hospitals and 7.5 (7.4) days for control hospitals. During the preintervention phase, population-averaged length of stay decreased by -0.344 hr/mo (95% CI, -0.599 to -0.090 hr/mo) in control hospitals; however, no change in trend was observed among intervention hospitals (-0.034 hr/mo; 95% CI, -0.646 to 0.714 hr/mo; difference in slopes, P = .09). Over the intervention phase (February 2018 through January 2019), length of stay remained unchanged in control hospitals (slope, -0.011 hr/mo; 95% CI, -0.281 to 0.260 hr/mo; change in slope, P = .03), but decreased steadily among intervention hospitals by -0.879 hr/mo (95% CI, -1.607 to -0.150 hr/mo; change in slope, P = .04, difference in slopes, P = .03). Safety analyses showed no change in trends of hospital readmission, in-hospital mortality, or facility discharge over the whole study time.; In this nonrandomized controlled trial, the implementation of an electronic interprofessional-led discharge planning tool was associated with a decline in length of stay without an increase in hospital readmission, in-hospital mortality, or facility discharge.; isrctn.org Identifier: ISRCTN83274049

    Human neutrophil kinetics: modeling of stable isotope labeling data supports short blood neutrophil half-lives.

    Get PDF
    Human neutrophils have traditionally been thought to have a short half-life in blood; estimates vary from 4-18 hours. This dogma was recently challenged by stable isotope labeling studies with heavy water which yielded estimates in excess of 3 days. To investigate this disparity we generated new stable isotope labeling data in healthy adult subjects using both heavy water (n=4) and deuterium-labeled glucose (n=9), a compound with more rapid labeling kinetics. To interpret results we developed a novel mechanistic model. We applied this model to both previously-published (n=5) and newly-generated data. We initially constrained the ratio of the blood neutrophil pool to the marrow precursor pool (R=0.26, from published values). Analysis of heavy water datasets yielded turnover rates consistent with a short blood half-life, but parameters, particularly marrow transit-time, were poorly-defined. Analysis of glucose-labeling data yielded more precise estimates of half-life, 0.79 ± 0.25 days (19 hours), and marrow transit-time, 5.80 ± 0.42 days. Substitution of this marrow transit-time in the heavy water analysis gave a better-defined blood half-life, 0.77 ± 0.14 days (18.5 hours), close to glucose-derived values. Allowing R to vary yielded a best-fit value, R=0.19. Reanalysis of the previously-published model and data also revealed the origin of their long estimates for neutrophil half-life, an implicit assumption that R is very large, which is physiologically untenable. We conclude that stable isotope labeling in healthy humans is consistent with a blood neutrophil half-life of less than one day

    IODP Expedition 330: Drilling the Louisville Seamount Trail in the SW Pacific

    Get PDF
    Deep-Earth convection can be understood by studying hotspot volcanoes that form where mantle plumes rise up and intersect the lithosphere, the Earth's rigid outer layer. Hotspots characteristically leave age-progressive trails of volcanoes and seamounts on top of oceanic lithosphere, which in turn allow us to decipher the motion of these plates relative to "fixed" deep-mantle plumes, and their (isotope) geochemistry provides insights into the long-term evolution of mantle source regions. However, it is strongly suggested that the Hawaiian mantle plume moved ~15° south between 80 and 50 million years ago. This raises a fundamental question about other hotspot systems in the Pacific, whether or not their mantle plumes experienced a similar amount and direction of motion. Integrated Ocean Drilling Program (IODP) Expedition 330 to the Louisville Seamounts showed that the Louisville hotspot in the South Pacific behaved in a different manner, as its mantle plume remained more or less fixed around 48°S latitude during that same time period. Our findings demonstrate that the Pacific hotspots move independently and that their trajectories may be controlled by differences in subduction zone geometry. Additionally, shipboard geochemistry data shows that, in contrast to Hawaiian volcanoes, the construction of the Louisville Seamounts doesn’t involve a shield-building phase dominated by tholeiitic lavas, and trace elements confirm the rather homogenous nature of the Louisville mantle source. Both observations set Louisville apart from the Hawaiian-Emperor seamount trail, whereby the latter has been erupting abundant tholeiites (characteristically up to 95% in volume) and which exhibit a large variability in (isotope) geochemistry and their mantle source components
    • …
    corecore