325 research outputs found
On the tear resistance of skin.
Tear resistance is of vital importance in the various functions of skin, especially protection from predatorial attack. Here, we mechanistically quantify the extreme tear resistance of skin and identify the underlying structural features, which lead to its sophisticated failure mechanisms. We explain why it is virtually impossible to propagate a tear in rabbit skin, chosen as a model material for the dermis of vertebrates. We express the deformation in terms of four mechanisms of collagen fibril activity in skin under tensile loading that virtually eliminate the possibility of tearing in pre-notched samples: fibril straightening, fibril reorientation towards the tensile direction, elastic stretching and interfibrillar sliding, all of which contribute to the redistribution of the stresses at the notch tip
Recommended from our members
The shape of Nature’s stingers revealed
Stinger-like structures in living organisms evolved convergently across taxa for both defensive and offensive purposes, with the main goal being penetration and damage. Our observations over a broad range of taxa and sizes, from microscopic radiolarians to narwhals, reveal a self-similar geometry of the stinger extremity: the diameter (d) increases along the distance from the tip (x) following a power law [Formula: see text] , with the tapering exponent varying universally between 2 and 3. We demonstrate, through analytical and experimental mechanics involving three-dimensional (3D) printing, that this geometry optimizes the stinger's performance; it represents a trade-off between the propensity to buckle, for n smaller than 2, and increased penetration force, for n greater than 3. Moreover, we find that this optimal tapering exponent does not depend on stinger size and aspect ratio (base diameter over length). We conclude that for Nature's stingers, composed of biological materials with moduli ranging from hundreds of megapascals to ten gigapascals, the necessity for a power-law contour increases with sharpness to ensure sufficient stability for penetration of skin-like tissues. Our results offer a solution to the puzzle underlying this universal geometric trait of biological stingers and may provide a new strategy to design needle-like structures for engineering or medical applications
Phase Transformation in Tantalum under Extreme Laser Deformation
The structural and mechanical response of metals is intimately connected to phase transformations. For instance, the product of a phase transformation (martensite) is responsible for the extraordinary range of strength and toughness of steel, making it a versatile and important structural material. Although abundant in metals and alloys, the discovery of new phase transformations is not currently a common event and often requires a mix of experimentation, predictive computations, and luck. High-energy pulsed lasers enable the exploration of extreme pressures and temperatures, where such discoveries may lie. The formation of a hexagonal (omega) phase was observed in recovered monocrystalline body-centered cubic tantalum of four crystallographic orientations subjected to an extreme regime of pressure, temperature, and strain-rate. This was accomplished using high-energy pulsed lasers. The omega phase and twinning were identified by transmission electron microscopy at 70 GPa (determined by a corresponding VISAR experiment). It is proposed that the shear stresses generated by the uniaxial strain state of shock compression play an essential role in the transformation. Molecular dynamics simulations show the transformation of small nodules from body-centered cubic to a hexagonal close-packed structure under the same stress state (pressure and shear).Fil: Lu, C. H.. University of California at San Diego; Estados UnidosFil: Hahn, E. N.. University of California at San Diego; Estados UnidosFil: Remington, B. A.. Lawrence Livermore National Laboratory; Estados UnidosFil: Maddox, B. R.. Lawrence Livermore National Laboratory; Estados UnidosFil: Bringa, Eduardo Marcial. Universidad Nacional de Cuyo; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza; ArgentinaFil: Meyers, Marc A.. University of California at San Diego; Estados Unido
Recommended from our members
The effects of ultra-fine-grained structure and cryogenic temperature on adiabatic shear localization in titanium
Recommended from our members
Micro-mechanical response of ultrafine grain and nanocrystalline tantalum
In order to investigate the effect of grain boundaries on the mechanical response in the micrometer and submicrometer levels, complementary experiments and molecular dynamics simulations were conducted on a model bcc metal, tantalum. Microscale pillar experiments (diameters of 1 and 2 μm) with a grain size of ~100–200 nm revealed a mechanical response characterized by a yield stress of ~1500 MPa. The hardening of the structure is reflected in the increase in the flow stress to 1700 MPa at a strain of ~0.35. Molecular dynamics simulations were conducted for nanocrystalline tantalum with grain sizes in the range of 20–50 nm and pillar diameters in the same range. The yield stress was approximately 6000 MPa for all specimens and the maximum of the stress–strain curves occurred at a strain of 0.07. Beyond that strain, the material softened because of its inability to store dislocations. The experimental results did not show a significant size dependence of yield stress on pillar diameter (equal to 1 and 2 um), which is attributed to the high ratio between pillar diameter and grain size (~10–20). This behavior is quite different from that in monocrystalline specimens where dislocation ‘starvation’ leads to a significant size dependence of strength. The ultrafine grains exhibit clear ‘pancaking’ upon being plastically deformed, with an increase in dislocation density. The plastic deformation is much more localized for the single crystals than for the nanocrystalline specimens, an observation made in both modeling and experiments. In the molecular dynamics simulations, the ratio of pillar diameter (20–50 nm) to grain size was in the range 0.2–2, and a much greater dependence of yield stress to pillar diameter was observed. A critical result from this work is the demonstration that the important parameter in establishing the overall deformation is the ratio between the grain size and pillar diameter; it governs the deformation mode, as well as surface sources and sinks, which are only important when the grain size is of the same order as the pillar diameter
Micro-mechanical response of ultrafine grain and nanocrystalline tantalum
In order to investigate the effect of grain boundaries on the mechanical response in the micrometer and submicrometer levels, complementary experiments and molecular dynamics simulations were conducted on a model bcc metal, tantalum. Microscale pillar experiments (diameters of 1 and 2 μm) with a grain size of ~100-200 nm revealed a mechanical response characterized by a yield stress of ~1500 MPa. The hardening of the structure is reflected in the increase in the flow stress to 1700 MPa at a strain of ~0.35. Molecular dynamics simulations were conducted for nanocrystalline tantalum with grain sizes in the range of 20-50 nm and pillar diameters in the same range. The yield stress was approximately 6000 MPa for all specimens and the maximum of the stress-strain curves occurred at a strain of 0.07. Beyond that strain, the material softened because of its inability to store dislocations. The experimental results did not show a significant size dependence of yield stress on pillar diameter (equal to 1 and 2 um), which is attributed to the high ratio between pillar diameter and grain size (~10-20). This behavior is quite different from that in monocrystalline specimens where dislocation 'starvation' leads to a significant size dependence of strength. The ultrafine grains exhibit clear 'pancaking' upon being plastically deformed, with an increase in dislocation density. The plastic deformation is much more localized for the single crystals than for the nanocrystalline specimens, an observation made in both modeling and experiments. In the molecular dynamics simulations, the ratio of pillar diameter (20-50 nm) to grain size was in the range 0.2-2, and a much greater dependence of yield stress to pillar diameter was observed. A critical result from this work is the demonstration that the important parameter in establishing the overall deformation is the ratio between the grain size and pillar diameter; it governs the deformation mode, as well as surface sources and sinks, which are only important when the grain size is of the same order as the pillar diameter.Fil: Yang, Wen. University of California at San Diego; Estados UnidosFil: Ruestes, Carlos Javier. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Mendoza. Instituto Interdisciplinario de Ciencias Básicas. - Universidad Nacional de Cuyo. Instituto Interdisciplinario de Ciencias Básicas; ArgentinaFil: Li, Zezhou. University of California at San Diego; Estados UnidosFil: Abad, Oscar Torrents. Leibniz Institute for New Materials; AlemaniaFil: Langdon, Terence G.. University of Southern California; Estados UnidosFil: Heiland, Birgit. Leibniz Institute for New Materials; AlemaniaFil: Koch, Marcus. Leibniz Institute for New Materials; AlemaniaFil: Arzt, Eduard. Leibniz Institute for New Materials; Alemania. Universitat Saarland; AlemaniaFil: Meyers, Marc A.. University of California at San Diego; Estados Unido
GREAT3 results I: systematic errors in shear estimation and the impact of real galaxy morphology
We present first results from the third GRavitational lEnsing Accuracy
Testing (GREAT3) challenge, the third in a sequence of challenges for testing
methods of inferring weak gravitational lensing shear distortions from
simulated galaxy images. GREAT3 was divided into experiments to test three
specific questions, and included simulated space- and ground-based data with
constant or cosmologically-varying shear fields. The simplest (control)
experiment included parametric galaxies with a realistic distribution of
signal-to-noise, size, and ellipticity, and a complex point spread function
(PSF). The other experiments tested the additional impact of realistic galaxy
morphology, multiple exposure imaging, and the uncertainty about a
spatially-varying PSF; the last two questions will be explored in Paper II. The
24 participating teams competed to estimate lensing shears to within systematic
error tolerances for upcoming Stage-IV dark energy surveys, making 1525
submissions overall. GREAT3 saw considerable variety and innovation in the
types of methods applied. Several teams now meet or exceed the targets in many
of the tests conducted (to within the statistical errors). We conclude that the
presence of realistic galaxy morphology in simulations changes shear
calibration biases by per cent for a wide range of methods. Other
effects such as truncation biases due to finite galaxy postage stamps, and the
impact of galaxy type as measured by the S\'{e}rsic index, are quantified for
the first time. Our results generalize previous studies regarding sensitivities
to galaxy size and signal-to-noise, and to PSF properties such as seeing and
defocus. Almost all methods' results support the simple model in which additive
shear biases depend linearly on PSF ellipticity.Comment: 32 pages + 15 pages of technical appendices; 28 figures; submitted to
MNRAS; latest version has minor updates in presentation of 4 figures, no
changes in content or conclusion
Recommended from our members
Inflation and Dark Energy from spectroscopy at z > 2
The expansion of the Universe is understood to have accelerated during two
epochs: in its very first moments during a period of Inflation and much more
recently, at z < 1, when Dark Energy is hypothesized to drive cosmic
acceleration. The undiscovered mechanisms behind these two epochs represent
some of the most important open problems in fundamental physics. The large
cosmological volume at 2 < z < 5, together with the ability to efficiently
target high- galaxies with known techniques, enables large gains in the
study of Inflation and Dark Energy. A future spectroscopic survey can test the
Gaussianity of the initial conditions up to a factor of ~50 better than our
current bounds, crossing the crucial theoretical threshold of
of order unity that separates single field and
multi-field models. Simultaneously, it can measure the fraction of Dark Energy
at the percent level up to , thus serving as an unprecedented test of
the standard model and opening up a tremendous discovery space
- …