403 research outputs found
Modification of the trapped field in bulk high-temperature superconductors as a result of the drilling of a pattern of artificial columnar holes
The trapped magnetic field is examined in bulk high-temperature
superconductors that are artificially drilled along their c-axis. The influence
of the hole pattern on the magnetization is studied and compared by means of
numerical models and Hall probe mapping techniques. To this aim, we consider
two bulk YBCO samples with a rectangular cross-section that are drilled each by
six holes arranged either on a rectangular lattice (sample I) or on a centered
rectangular lattice (sample II). For the numerical analysis, three different
models are considered for calculating the trapped flux: (i), a two-dimensional
(2D) Bean model neglecting demagnetizing effects and flux creep, (ii), a 2D
finite-element model neglecting demagnetizing effects but incorporating
magnetic relaxation in the form of an E-J power law, and, (iii), a 3D finite
element analysis that takes into account both the finite height of the sample
and flux creep effects. For the experimental analysis, the trapped magnetic
flux density is measured above the sample surface by Hall probe mapping
performed before and after the drilling process. The maximum trapped flux
density in the drilled samples is found to be smaller than that in the plain
samples. The smallest magnetization drop is found for sample II, with the
centered rectangular lattice. This result is confirmed by the numerical models.
In each sample, the relative drops that are calculated independently with the
three different models are in good agreement. As observed experimentally, the
magnetization drop calculated in the sample II is the smallest one and its
relative value is comparable to the measured one. By contrast, the measured
magnetization drop in sample (1) is much larger than that predicted by the
simulations, most likely because of a change of the microstructure during the
drilling process.Comment: Proceedings of EUCAS 09 conferenc
Recommended from our members
Modeling the martian atmosphere with the LMD global climate model
Introduction: For several years we have been developing a 3D Global Climate Model (GCM) for Mars derived from the models used on Earth for weather forecasting or climate changes studies [1]. The purpose of such a project is ambitious: we wish to build a 'Mars simulator' based only on physical equations, with no tailor-made forcing, but able to reproduce all the available observations of the Martian climate (temperatures, winds, but also clouds, dust, ices, chemical species, etc...).
The GCM is constantly evolving, thanks to a contnuous collaboration between several teams based in France (LMD, SA), the UK (The Open University, University of Oxford) and Spain (Instituto de Astrofisica de Andalucia), and with the support of ESA and CNES.
We are currently working on an improved version of the model. Several new parametrisation are included in the heart of the model (radiative transfer, surface and subsurface processes, dynamics) and the applications of the GCM are in contnuous development (Water, dust, CO2, radon cycles, photochemistry, thermosphere, ionosphere, etc...
Pulsed-field magnetization of drilled bulk high-temperature superconductors: flux front propagation in the volume and on the surface
We present a method for characterizing the propagation of the magnetic flux
in an artificially drilled bulk high-temperature superconductor (HTS) during a
pulsed-field magnetization. As the magnetic pulse penetrates the cylindrical
sample, the magnetic flux density is measured simultaneously in 16 holes by
means of microcoils that are placed across the median plane, i.e. at an equal
distance from the top and bottom surfaces, and close to the surface of the
sample. We discuss the time evolution of the magnetic flux density in the holes
during a pulse and measure the time taken by the external magnetic flux to
reach each hole. Our data show that the flux front moves faster in the median
plane than on the surface when penetrating the sample edge; it then proceeds
faster along the surface than in the bulk as it penetrates the sample further.
Once the pulse is over, the trapped flux density inside the central hole is
found to be about twice as large in the median plane than on the surface. This
ratio is confirmed by modelling
Erratum to: Benchmarks for ethically credible partnerships between industry and academic health centers: beyond disclosure of financial conflicts of interest.
Relationships between industry and university-based researchers have been commonplace for decades and have received notable attention concerning the conflicts of interest these relationships may harbor. While new efforts are being made to update conflict of interest policies and make industry relationships with academia more transparent, the development of broader institutional partnerships between industry and academic health centers challenges the efficacy of current policy to effectively manage these innovative partnerships. In this paper, we argue that existing strategies to reduce conflicts of interest are not sufficient to address the emerging models of industry-academic partnerships because they focus too narrowly on financial matters and are not comprehensive enough to mitigate all ethical risk. Moreover, conflict-of-interest strategies are not designed to promote best practices nor the scientific and social benefits of academic-industry collaboration. We propose a framework of principles and benchmarks for "ethically credible partnerships" between industry and academic health centers and describe how this framework may provide a practical and comprehensive approach for designing and evaluating such partnerships
Bulk high-Tc superconductors with drilled holes: how to arrange the holes to maximize the trapped magnetic flux ?
Drilling holes in a bulk high-Tc superconductor enhances the oxygen annealing
and the heat exchange with the cooling liquid. However, drilling holes also
reduces the amount of magnetic flux that can be trapped in the sample. In this
paper, we use the Bean model to study the magnetization and the current line
distribution in drilled samples, as a function of the hole positions. A single
hole perturbs the critical current flow over an extended region that is bounded
by a discontinuity line, where the direction of the current density changes
abruptly. We demonstrate that the trapped magnetic flux is maximized if the
center of each hole is positioned on one of the discontinuity lines produced by
the neighbouring holes. For a cylindrical sample, we construct a polar
triangular hole pattern that exploits this principle; in such a lattice, the
trapped field is ~20% higher than in a squared lattice, for which the holes do
not lie on discontinuity lines. This result indicates that one can
simultaneously enhance the oxygen annealing, the heat transfer, and maximize
the trapped field
Apatites in Gale Crater
ChemCam is an active remote sensing instrument suite that has operated successfully on MSL since landing Aug. 6th, 2012. It uses laser pulses to remove dust and to analyze rocks up to 7 m away. Laser-induced breakdown spectroscopy (LIBS) obtains emission spectra of materials ablated from the samples in electronically excited states. The intensities of the emission lines scale with the abundances of the related element. ChemCam is sensitive to most major rock-forming elements as well as to a set of minor and trace elements such as F, Cl, Li, P, Sr, Ba, and Rb. The measured chemical composition can then be used to infer the mineralogical composition of the ablated material. Here, we report a summary of inferred apatite detections along the MSL traverse at Gale Crater. We present the geologic settings of these findings and derive some interpretations about the formation conditions of apatite in time and space
Perforated monodomain YBa 2 Cu 3 O 7-x bulk superconductors prepared by infiltration-growth process
Abstract : For various applications such as FCL, motor flyweel or bearing, ... the core of bulk superconductors need to be fully oxygenated and some defects like cracks, pores and voids suppressed, in order that the material can carry high current densities. In order to study and minimise the above defects, we have developed a new elaboration technique. YBa 2 Cu 3 O y (Y123) bulks have been prepared by combining liquid infiltration and top seed growth (ITSG) process. This process involves negligible shrinkage and an uniform distribution of Y211 inclusions. In addition, we prepare a regular perforation of the Y123 sample in view to magnify the specific surface and by then increase oxygen diffusion into the core of the material. Neutron texture analysis demonstrates the nonperturbative effect of the holes in the bulk from the orientation point of view. The advantages of the ITSG-process and of the novel perforated Y123 bulk are discussed
Ethical Issues in Measuring Biomarkers in Children’s Environmental Health
Background: Studying the impact of environmental exposures is important in children because they are more vulnerable to adverse effects on growth, development, and health. Assessing exposure in children is difficult, and measuring biomarkers is potentially useful. Research measuring biomarkers in children raises a number of ethical issues, some of which relate to children as research subjects and some of which are specific to biomarker research. Objective: As an international group with experience in pediatric research, biomarkers, and the ethics of research in children, we highlight the ethical issues of undertaking biomarker research in children in these environments. Discussion: Significant issues include undertaking research in vulnerable communities, especially in developing countries; managing community expectations; obtaining appropriate consent to conduct the research; the potential conflicts of obtaining permission from an ethics review board in an economically developed country to perform research in a community that may have different cultural values; returning research results to participants and communities when the researchers are uncertain of how to interpret the results; and the conflicting ethical obligations of maintaining participant confidentiality when information about harm or illegal activities mandate reporting to authorities. Conclusion: None of these challenges are insurmountable and all deserve discussion. Pediatric biomarker research is necessary for advancing child health
- …