Selecting background galaxies in weak-lensing analysis of galaxy clusters

In this paper, we present a new method to select the faint, background galaxies used to derive the mass of galaxy clusters by weak lensing. The method is based on the simultaneous analysis of the shear signal, that should be consistent with zero for the foreground, unlensed galaxies, and of the colors of the galaxies: photometric data from the COSMic evOlution Survey are used to train the color selection. In order to validate this methodology, we test it against a set of state-of-the-art image simulations of mock galaxy clusters in different redshift [$0.23-0.45$] and mass [$0.5-1.55\times10^{15}M_\odot$] ranges, mimicking medium-deep multicolor imaging observations (e.g. SUBARU, LBT). The performance of our method in terms of contamination by unlensed sources is comparable to a selection based on photometric redshifts, which however requires a good spectral coverage and is thus much more observationally demanding. The application of our method to simulations gives an average ratio between estimated and true masses of $\sim 0.98 \pm 0.09$. As a further test, we finally apply our method to real data, and compare our results with other weak lensing mass estimates in the literature: for this purpose we choose the cluster Abell 2219 ($z=0.228$), for which multi-band (BVRi) data are publicly available.Comment: MNRAS, Accepted 2016 February 2

Is the Number of Giant Arcs in LCDM Consistent With Observations?

We use high-resolution N-body simulations to study the galaxy-cluster cross-sections and the abundance of giant arcs in the $\Lambda$CDM model. Clusters are selected from the simulations using the friends-of-friends method, and their cross-sections for forming giant arcs are analyzed. The background sources are assumed to follow a uniform ellipticity distribution from 0 to 0.5 and to have an area identical to a circular source with diameter 1\arcsec. We find that the optical depth scales as the source redshift approximately as \tau_{1''} = 2.25 \times 10^{-6}/[1+(\zs/3.14)^{-3.42}] (0.6<\zs<7). The amplitude is about 50% higher for an effective source diameter of 0.5\arcsec. The optimal lens redshift for giant arcs with the length-to-width ratio ($L/W$) larger than 10 increases from 0.3 for \zs=1, to 0.5 for \zs=2, and to 0.7-0.8 for \zs>3. The optical depth is sensitive to the source redshift, in qualitative agreement with Wambsganss et al. (2004). However, our overall optical depth appears to be only $\sim$ 10% to 70% of those from previous studies. The differences can be mostly explained by different power spectrum normalizations ($\sigma_8$) used and different ways of determining the $L/W$ ratio. Finite source size and ellipticity have modest effects on the optical depth. We also found that the number of highly magnified (with magnification $|\mu|>10$) and ``undistorted'' images (with $L/W<3$) is comparable to the number of giant arcs with $|\mu|>10$ and $L/W>10$. We conclude that our predicted rate of giant arcs may be lower than the observed rate, although the precise `discrepancy' is still unclear due to uncertainties both in theory and observations.Comment: Revised version after the referee's reports (32 pages,13figures). The paper has been significantly revised with many additions. The new version includes more detailed comparisons with previous studies, including the effects of source size and ellipticity. New discussions about the redshift distribution of lensing clusters and the width of giant arcs have been adde

Does repetitive thinking mediate the relationship between self-compassion and competition anxiety in athletes?

Due to the promising effect of self-compassion interventions in sports, it was the main goal of this study to investigate, if two aspects of repetitive thinking, worry and rumination, mediate the possible relation of self-compassion on competition anxiety of women and men in different types of sport (team- vs. individual sport). Two hundred and ninety-three athletes participated, 127 were soccer players, 103 handball players, and 63 athletes practiced an individual sport. They completed four questionnaires of sport competition anxiety, rumination, worry, and self-compassion. The results showed that for both rumination and worry, women had higher values than men and individual athletes had higher values than athletes from team sport. Women had higher values in the negative scale of self-compassion compared to men, and individual athletes and handball players had lower values than soccer players. The result of a mediation analysis demonstrated that the relation between the negative scale of self-compassion and the somatic anxiety and concern aspect of competition anxiety was mediated by worry

Waste-to-energy application in an industrial district

Industrial districts present some features that can be recognized and exploited in the plant engineering through the proposal of solutions which are not simple applications of models created for individual companies. This work illustrates a waste-to-energy plant to be used for the industrial waste of the district of Friuli Venezia Giulia. The project from the union between university and local entrepreneurs. It is described how the expense for woodworking-waste disposal can turn from a charge into an advantage for the firms of the district thanks to the incineration of this waste in a plant unique for the typology of waste treated. Each plant section is described in detail, underlining innovative approaches and solutions

Decarbonizing the cold chain: Long-haul refrigerated deliveries with on-board photovoltaic energy integration

Decarbonizing the cold chain is a priority for sustainability due to the increasing demand for chilled/frozen food and pharmaceutics. Refrigerated transport requires additional fuel for refrigeration other than for traction. Photovoltaic panels on the vehicle rooftop, a battery bank, and a power conversion system can replace the diesel engine driving the transport refrigerated unit. In long-haul deliveries, vehicles cross zones with different climate conditions, which affect both refrigeration requirements and photovoltaic energy conversion. Mandatory driver\u2019s breaks and rest also affect delivery timing and energy consumption. A multiperiod, multizone optimization model is developed to size the onboard photovoltaic system, based on features of the delivery tour. The model is applied to a palletized chilled food delivery from North-Eastern Italy, showing a payback time of around four years, which can drop under two years for expected reduction of component costs. Economic and environmental performances can be increased by also allowing refrigerated products on-board during the return journey, leading to more fuel savings. Photovoltaic-integrated long-haul delivery for frozen products is not convenient at current market costs. Different climate conditions are tested, showing the model ability to act as a decision support tool to foster renewable energy penetration into the cold chain

Weighing simulated galaxy clusters using lensing and X-ray

We aim at investigating potential biases in lensing and X-ray methods to measure the cluster mass profiles. We do so by performing realistic simulations of lensing and X-ray observations that are subsequently analyzed using observational techniques. The resulting mass estimates are compared among them and with the input models. Three clusters obtained from state-of-the-art hydrodynamical simulations, each of which has been projected along three independent lines-of-sight, are used for this analysis. We find that strong lensing models can be trusted over a limited region around the cluster core. Extrapolating the strong lensing mass models to outside the Einstein ring can lead to significant biases in the mass estimates, if the BCG is not modeled properly for example. Weak lensing mass measurements can be largely affected by substructures, depending on the method implemented to convert the shear into a mass estimate. Using non-parametric methods which combine weak and strong lensing data, the projected masses within R200 can be constrained with a precision of ~10%. De-projection of lensing masses increases the scatter around the true masses by more than a factor of two due to cluster triaxiality. X-ray mass measurements have much smaller scatter (about a factor of two smaller than the lensing masses) but they are generally biased low by 5-20%. This bias is ascribable to bulk motions in the gas of our simulated clusters. Using the lensing and the X-ray masses as proxies for the true and the hydrostatic equilibrium masses of the simulated clusters and averaging over the cluster sample we are able to measure the lack of hydrostatic equilibrium in the systems we have investigated.Comment: 27 pages, 21 figures, accepted for publication on A&A. Version with full resolution images can be found at http://pico.bo.astro.it/~massimo/Public/Papers/massComp.pd

Mass Distributions of HST Galaxy Clusters from Gravitational Arcs

Although N-body simulations of cosmic structure formation suggest that dark matter halos have density profiles shallower than isothermal at small radii and steeper at large radii, whether observed galaxy clusters follow this profile is still ambiguous. We use one such density profile, the asymmetric NFW profile, to model the mass distributions of 11 galaxy clusters with gravitational arcs observed by HST. We characterize the galaxy lenses in each cluster as NFW ellipsoids, each defined by an unknown scale convergence, scale radius, ellipticity, and position angle. For a given set of values of these parameters, we compute the arcs that would be produced by such a lens system. To define the goodness of fit to the observed arc system, we define a chi^2 function encompassing the overlap between the observed and reproduced arcs as well as the agreement between the predicted arc sources and the observational constraints on the source system. We minimize this chi^2 to find the values of the lens parameters that best reproduce the observed arc system in a given cluster. Here we report our best-fit lens parameters and corresponding mass estimates for each of the 11 lensing clusters. We find that cluster mass models based on lensing galaxies defined as NFW ellipsoids can accurately reproduce the observed arcs, and that the best-fit parameters to such a model fall within the reasonable ranges defined by simulations. These results assert NFW profiles as an effective model for the mass distributions of observed clusters.Comment: Submitted to ApJ, 14 figures include

Mode I fatigue limit of notched structures: A deeper insight into Finite Fracture Mechanics

In the present contribution, the coupled stress-energy criterion of Finite Fracture Mechanics (FFM) is applied to assess the fatigue limit of structures weakened by sharp V- and U-notches and subjected to mode I loading conditions. The FFM is a critical-distance-based approach whose implementation requires the knowledge of two material properties, namely the plain material fatigue limit and the threshold value of the stress intensity factor (SIF) range for the fatigue crack growth of long cracks. However, the FFM critical distance is a structural parameter, being a function not only of the material but also of the geometry of the notched component. Experimental notch fatigue results taken from the literature and referred to a variety of materials and geometrical configurations are compared with FFM theoretical estimations, obtained through simple semi-analytical relationships. The case of semi-circular edge notches is also dealt with

Crystallographic and spectroscopic study on a known orally active progestin

6,17a-dimethyl-4,6-pregnadiene-3,20-dione (medrogestone, 2) is for a long time known steroid endowed with progestational activity. In order to study its crystallographic and NMR spectroscopic properties with the aim to fill the literature gap, we prepared medrogestone following a traditional procedure. A careful NMR study allowed the complete assignement of the 1H and 13C NMR signals not only of medrogestone but also of its synthetic intermediates. The structural and stereochemical characterizations of medrogestone togheter with its precursor 17a-methyl-3-ethoxy-pregna-3,5- dien-20-one were described by means of X-ray analysis, allowing a deepened conformational investigation

Metallicity evolution, metallicity gradients and gas fractions at z~3.4

We used near-infrared integral field spectroscopic observations from the AMAZE and LSD programs to constrain the metallicity in a sample of 40 star forming galaxies at 3<z<5 (most of which at z~3.4). We measure metallicities by exploiting strong emission line diagnostics. We found that a significant fraction of star-forming galaxies at z~3.4 deviate from the Fundamental Metallicity Relation (FMR), with a metallicity up to a factor of ten lower than expected according to the FMR. This deviation does not correlate with the dynamical properties of the galaxy or with the presence of interactions. To investigate the origin of the metallicity deviations in more detail, we also infer information on the gas content, by inverting the Schmidt-Kennicutt relation. In agreement with recent CO observational data, we found that, in contrast with the steeply rising trend at 0<z<2, the gas fraction in massive galaxies remains constant, with indication of a marginal decline, at 2<z<3.5. When combined with the metallicity information, we infer that to explain both the low metallicity and gas content in z~3.4 galaxies, both prominent outflows and massive pristine gas inflows are needed. In ten galaxies we can also spatially resolve the metallicity distribution. We found that the metallicity generally anticorrelates with the distribution of star formation and with the gas surface density. We discuss these findings in terms of pristine gas inflows towards the center, and outflows of metal rich gas from the center toward the external regions. (Abridged)Comment: Replaced to match the published versio