590 research outputs found
Ranking the geothermal potential of radiothermal granites in Scotland: are any others as hot as the Cairngorms?
Prior investigations concur that the granite plutons in Scotland which are most likely to prove favourable for geothermal exploration are the Ballater, Bennachie, Cairngorm and Mount Battock plutons, all of which have heat production values greater than 5 μW m−3. This heat production arises from the significant concentrations of potassium, uranium and thorium in some granite plutons. A new field-based gamma-ray spectrometric survey targeted plutons that were poorly surveyed in the past or near areas of high heat demand. This survey identifies several other plutons (Ben Rhinnes, Cheviot, Hill of Fare, Lochnagar and Monadhliath) with heat production rates between 3 and 5 μW m−3 that could well have geothermal gradients sufficient for direct heat use rather than higher temperatures required for electricity generation.
The Criffel and Cheviot plutons are examples of Scottish granites that have concentric compositional zonation and some zones have significantly higher (up to 20%) heat production rates than others in the same plutons. However, the relatively small surface areas of individual high heat-production zones mean that it is unlikely to be worthwhile specifically targeting them
Gamma-ray spectrometry in the field: Radioactive heat production in the Central Slovakian Volcanic Zone
We report 62 sets of measurements from central-southern Slovakia, obtained using a modern portable gamma-ray spectrometer, which reveal the radioactive heat production in intrusive and extrusive igneous rocks of the Late Cenozoic Central Slovakian Volcanic Zone. Sites in granodiorite of the Štiavnica pluton are thus shown to have heat production in the range ~ 2.2–4.9 μW m− 3, this variability being primarily a reflection of variations in content of the trace element uranium. Sites in dioritic parts of this pluton have a lower, but overlapping, range of values, ~ 2.1–4.4 μW m− 3. Sites that have been interpreted in adjoining minor dioritic intrusions of similar age have heat production in the range ~ 1.4–3.3 μW m− 3. The main Štiavnica pluton has zoned composition, with potassium and uranium content and radioactive heat production typically increasing inward from its margins, reflecting variations observed in other granodioritic plutons elsewhere. It is indeed possible that the adjoining dioritic rocks, hitherto assigned to other minor intrusions of similar age, located around the periphery of the Štiavnica pluton, in reality provide further evidence for zonation of the same pluton. The vicinity of this pluton is associated with surface heat flow ~ 40 mW m− 2 above the regional background. On the basis of our heat production measurements, we thus infer that the pluton has a substantial vertical extent, our preferred estimate for the scale depth for its downward decrease in radioactive heat production being ~ 8 km. Nonetheless, this pluton lacks any significant negative Bouguer gravity anomaly. We attribute this to the effect of the surrounding volcanic caldera, filled with relatively low-density lavas, ‘masking’ the pluton's own gravity anomaly. We envisage that emplacement occurred when the pluton was much hotter, and thus of lower density, than at present, its continued uplift, evident from the local geomorphology, being the isostatic consequence of localized erosion. The heat production in this intrusion evidently plays a significant role, hitherto unrecognized, in the regional geothermics
“A Process of Controlled Serendipity”: An Exploratory Study of Historians’ and Digital Historians’ Experiences of Serendipity in Digital Environments
We investigate historians\u27 experiences with serendipity in both physical and digital environments through an online survey. Through a combination of qualitative and quantitative data analyses, our preliminary findings show that many digital historians select a specific digital environment because of the expectation that it may elicit a serendipitous experience. Historians also create heuristic methods of using digital tools to integrate elements of serendipity into their research practice. Four features of digital environments were identified by participants as supporting serendipity: exploration, highlighted triggers, allowed for keyword searching and connected them to other people
A meta-analysis of coal mining induced subsidence data and implications for their use in the carbon industry
Many empricial subsidence estimation tools exist worldwide but are designed and calibrated for specific coalfields. This paper presents an universal tool for the estimation of maximum subsidence (SMax). The subsidence tool is based on pooling and meta-analysis of empirical data from a number of different countries and coalfields. The key factors influencing SMax are the void dimensions and the mechanical competency of the overburden. These factors are used to estimate subsidence using the empirical equation SMax = [c/(1 + 10^(−a((W/D) − b)))] ∗m, where W is the width of the void, D the depth, m the effective void thickness, and a, b, c are parameters related to the mechanical competency of the overburden. This universial empirical method was validated against historical data from United Kingdom and Australia. The method also provided SMax estimations for underground coal gasification (UCG) projects, that were inline with those from numerical modelling under certain conditions. This tool would likely be most useful when investigating areas, where there are little or no historical data of subsidence and mining. Such areas are most likely to be targeted by UCG schemes
Renewing the Exploration Approach for Mid-Enthalpy Systems: Examples from Northern England and Scotland
After a promising start in the 1970s and 80s, the UK rather fell behind other countries in the search for viable mid-enthalpy
geothermal resources. This situation began to turn around in 2004, when the first of three deep geothermal exploration boreholes
were drilled in northern England. What distinguished these from earlier drilling in Cornwall was the deliberate search for naturallyhigh
permeability associated with major faults, especially those that have undergone strike-slip reactivation during the Cenozoic.
Boreholes at Eastgate in the North Pennines targeted buried radiothermal granite, whereas the 1,821m-deep Science Central
Borehole in Newcastle upon Tyne targeted a postulated deep sedimentary aquifer (the Fell Sandstones), which were inferred to be
connected laterally to the granitic heat source by a major fault (the reactivation of the Iapetus geo-suture). The drilling was in both
cases rewarded with impressive heat flows, and in the case of Eastgate with what is believed to be the highest permeability yet
found in a deep granite batholith anywhere in the world. In parallel with these developments, a re-assessment was made of the preexisting
geothermal heat flow database for the UK, applying newly-standardised correction protocols for palaeoclimatic and
topographic distortions, which were found to be particularly marked in Scotland (where only shallow boreholes had been used to
establish geothermal gradients in the original 1980s analysis), Similar prospects in northern England (similar to that drilled at
Science Central) are now the focus of commercial exploration efforts. Appraisal of fault dispositions relative to the present-day
maximum compressive stress azimuth are being used to identify the most promising areas for intersecting fault-related permeability
at depth. New geophysical tools – most notably atomic dielectric resonance scanning – are also being appraised for their ability to
directly detect features (such as hot brines) which are indicative of localised convection in target fault zones and aquifers
Laser Welding Dissimilar Reflective Alloys
This project, jointly sponsored by Rocketdyne and CSTAR, involves the development of laser joining of materials which have heretofore been impractical to bond. Of particular interest are joints between stainless steel and copper and also aluminum 6061 to aluminum 2219. CSTAR has a unique opportunity in this area since both the process and development and diagnostics are of interest to industry. Initial results using the pulse tailored laser welding technique developed in CLA for joining crack sensitive materials have proven promising for the aluminum joints based upon metallurgical and electronic microprobe analysis. A declaration of success requires additional mechanical testing. A CW technique has been applied to the stainless-copper joining with some preliminary success. These joints are of significant interest for aeronautics and rocket propulsion applications and the project is expected to continue
Recommended from our members
Observing Serendipity in Digital Information Environments
We often interact with digital information environments to find useful information. But sometimes useful information finds us unexpectedly, propelling us in new and exciting directions. We might come across information serendipitously when looking for information on something else, or when we are not looking for anything in particular. In previous studies, people have self-reported that they come across information serendipitously. However, there has been limited success in directly observing people doing so. To see if we could have more success, we conducted naturalistic observations of 45 users interacting with different types of digital information environments. Without priming them about serendipity, we asked the users to conduct self-chosen naturalistic information tasks, which varied from broad tasks such as browsing online news to narrow tasks such as finding a particular product to buy. We noted several examples where users either 1) stated they were looking for information on a particular topic or product and unexpectedly found useful/potentially useful information about something else or 2) unexpectedly found useful/potentially useful information when not looking for anything in particular. Our findings suggest that, with a carefully-considered approach, serendipity-related information interaction behaviour can be directly observed. Direct observation allows designers of digital information environments to better understand this behaviour and use this understanding to reason about ways of designing new or improving existing support for serendipity
God\u27s Church Is Just: A Specific Discussion Of Some Cases of Church Discipline
https://digitalcommons.acu.edu/crs_books/1364/thumbnail.jp
- …