Sensitivity Improvement of a 1-μm Ladar System Incorporating an Active Optical Fiber Preamplifier

In an effort to increase the SNR of a continuous wave, 1-μm all solid state ladar system, a rare-earth-doped optical fiber amplifier is investigated as a preamplifier for ladar return signals. The experimental system is detailed and a theoretical analysis of the fiber amplifier\u27s effect on both heterodyne and direct detection schemes is provided. Beginning with the optical powers incident on the detector, the signal and noises are analyzed, through the detector electronics, to predict the SNR. The SNR is then plotted as a function of the return signal power, and a SNR threshold is defined to determine a minimum detectable signal power. The return signals required to attain the SNR threshold are then compared for four cases: direct detection with and without the fiber amplifier and heterodyne detection with and without the fiber amplifier. For the direct detection scheme considered, our results predict a sensitivity increase of 20.6 dB with the addition of the fiber amplifier, yet for heterodyne detection the predicted sensitivity increase is only 3.1 dB

Optical-fiber Preamplifiers for Ladar Detection and Associated Measurements for Improving the Signal-to-noise Ratio

In an effort to increase achievable postdetection signal-tonoise ratios (SNRs) of continuous-wave, 1-gm all-solid-state ladar systems, a prototype rare-earth-doped optical-fiber amplifier has been included in the optical return signal path of both a heterodyne and a directdetection ladar system. We provide numerical predictions for SNR increases according to our previously developed theory. We also detail our experimental efforts and provide the results of SNR measurements for four distinct cases: direct ladar detection with and without a fiber amplifier, and heterodyne ladar detection with and without a fiber amplifier. Experimentally measured increases in SNRs for ladar systems incorporating an optical-fiber amplifier are then compared with our earlier predictions. Specifically, we have found that for direct detection with a fiber amplifier in place, the predicted SNR increase is 42.0 dB, and we have measured an increase of 36.5 dB. Similarly, for heterodyne ladar detection with a fiber amplifier, the predicted SNR increase is 3.8 dB, and we have measured an increase of 8.0 dB

Modeling of Optical Aberration Correction using a Liquid Crystal Device

Gruneisen (sup 1-3), has shown that small, light weight, liquid crystal based devices can correct for the optical distortion caused by an imperfect primary mirror in a telescope and has discussed the efficiency of this correction. In this paper we expand on that work and propose a semi-analytical approach for quantifying the efficiency of a liquid crystal based wavefront corrector for this application

Coherent Versus Incoherent Ladar Detection at 2.09 μm

A 2.09-μm ladar system is built to compare coherent to incoherent detection. The 2.09-μm wavelength is of interest because of its high atmospheric transmission and because it is eyesafe. The 2.09-μm system presented is capable of either a coherent or incoherent operational mode, is tunable in a small region around 2.09 μm, and is being used to look at the statistical nature of the ladar return pulses for typical glint and speckle targets. To compare coherent to incoherent detection the probability of detection is investigated as the primary performance criterion of interest. The probability of detection is dependent on both the probability of false alarm and the probability density function, representing the signal current output from the detector. These probability distributions are different for each detection technique and for each type of target. Furthermore, the probability of detection and the probability of false alarm are both functions of the dominating noise source(s) in the system. A description of the theoretical expectations of this system along with the setup of the ladar system and how it is being used to collect data for both coherent and incoherent detection is presented

Using Ethnographic Methods to Articulate Community-Based Conceptions of Cultural Heritage Management

How can ethnographic methods help communities articulate and enact their own conceptions of heritage management? This and related questions are being explored through an international research project, ‘Intellectual Property Issues in Cultural Heritage’. The project includes up to twenty community- based initiatives that incorporate community-based participatory research and ethnographic methods to explore emerging intellectual property-related issues in archaeological contexts; the means by which they are being addressed or resolved; and the broader implications of these issues and concerns. We discuss three examples that use ethnography to (a) articulate local or customary laws and principles of archaeological heritage management among a First Nations group in British Columbia; (b) assemble knowledge related to land/sea use and cultural practices of the Moriori people of Rekohu (Chatham Islands) for their use in future land and heritage manage- ment policies; and (c) aid a tribal cultural centre in Michigan in crafting co-management strategies to protect spiritual traditions associated with a rock art site on state property. Such situations call for participatory methods that place control over the design, process, products, and interpretation of ‘archaeology’ in the hands of cultural descendants. We hope that these examples of community-based conceptions of archaeological heritage management, facilitated through ethnographic methods and participatory approaches, will increase awareness of the value of these and other alternative approaches and the need to share them widely

Discovery of os cordis in the cardiac skeleton of chimpanzees (Pan troglodytes)

Cardiovascular diseases, especially idiopathic myocardial fibrosis, is one of the most significant causes of morbidity and mortality in captive great apes. This study compared the structure and morphology of 16 hearts from chimpanzees (Pan troglodytes) which were either healthy or affected by myocardial fibrosis using X-ray microtomography. In four hearts, a single, hyperdense structure was detected within the right fibrous trigone of the cardiac skeleton. High resolution scans and histopathology revealed trabecular bones in two cases, hyaline cartilage in another case and a focus of mineralised fibro-cartilaginous metaplasia with endochondral ossification in the last case. Four other animals presented with multiple foci of ectopic calcification within the walls of the great vessels. All hearts affected by marked myocardial fibrosis presented with bone or cartilage formation, and increased collagen levels in tissues adjacent to the bone/cartilage, while unaffected hearts did not present with os cordis or cartilago cordis. The presence of an os cordis has been described in some ruminants, camelids, and otters, but never in great apes. This novel research indicates that an os cordis and cartilago cordis is present in some chimpanzees, particularly those affected by myocardial fibrosis, and could influence the risk of cardiac arrhythmias and sudden death

Participatory Augering: A methodology for challenging perceptions of archaeology and landscape change

Public engagement is a significant feature of twenty-first-century archaeological practice. While more diverse audiences are connecting with the discipline in a multitude of ways, public perceptions of archaeology are still marred by stereotypes. Community excavations of ‘sites’ to discover ‘treasures’ which tell us about the ‘past’ overshadow other forms of public research output and hinder the potential of the discipline to contribute to contemporary society more widely. This paper proposes participatory augering as an active public engagement method that challenges assumptions about the nature of archaeological practice by focusing on interpretation at a landscape-scale. Through exploration of recent participatory augering research by the REFIT Project and Environmental Archaeologist Mike Allen, this paper demonstrates how the public can contribute to active archaeological research by exploring narratives of landscape change. Evaluation of the existing case studies reflects the potential of the approach to engage audiences with new archaeological methods and narratives which have the potential to transform perceptions of the discipline and, through knowledge exchange, drive community-led contributions to contemporary landscape management

Cold War : a Transnational Approach to a Global Heritage

Although within living memory, many countries now consider their surviving Cold War architecture as part of their heritage. It can even be a priority for heritage managers given that significant buildings are often suitable for reuse while extensive ‘brownfield’ sites such as airfields can be used for large-scale redevelopment. In a number of countries whose work we refer to here (notably the United Kingdom and elsewhere in Europe), agencies responsible for managing their country’s heritage have approached this priority by creating national inventories of sites and buildings with a view to taking informed decisions on their future. This paper presents the argument that the wider international context of the Cold War provides a more appropriate (or additional, higher-level) framework for such decision making. Such a ‘transnational’ approach would allow the comparison of similar (e.g. European) sites not merely within national borders but across the full extent of their western NATO1 deployment in Europe and North America. Taking this approach would also allow comparison with related sites in countries that formed part of the eastern-bloc Warsaw Pact.2 After outlining some examples of how national agencies have approached their Cold War heritage, this paper presents the four stages of this transnational approach making provision for an improved understanding and management of Cold War heritage sites wherever they occur. With a specific focus on the direct comparison between England and Russia, and also referring to sites surviving elsewhere within the former NATO and Warsaw Pact regions, as well as the United States, we argue that this four-stage approach: provides new understandings of a complex archaeological and architectural record; gives fresh perspectives on significance; and (importantly in a time of geopolitical instability) does so in a spirit of cooperation and friendship

Spectral Band Selection and Classifier Design for a Multispectral Imaging Laser Radar

A statistical spectral band selection procedure and classifiers for an active multispectral laser radar (LADAR) sensor are described. The sensor will operate in the 1 to 5 mm wavelength region. The algorithms proposed are tested using library reflectance spectra for some representative background materials. The material classes considered include both natural (vegetation and soil) and man-made (camouflage cloth and tar-asphalt). The analysis includes noise statistics due to Gaussian receiver noise and target induced speckle variations in the LADAR return signal intensity. The results of this analysis are then directly applied to an artificially generated spatial template of a scene consisting of these four material classes. The performance of four different classifier algorithms, which include a minimum distance classifier, a logdomain minimum distance classifier, a Bayes speckle-only classifier, and a Bayes speckle-Gaussian classifier, are evaluated. We show that the Bayesian classifier designed for speckle and Gaussian noise statistics outperforms the other classifiers. Our results also indicate that even when exact knowledge of the observation model is available, the classifier performance for speckled images can be poor unless the number of integrated speckle cells is large