Estimation of offsets in GPS time-series and application to the detection of earthquake deformation in the far-field

Extracting geophysical signals from Global Positioning System (GPS) coordinate time-series is a well-established practice that has led to great insights into how the Earth deforms. Often small discontinuities are found in such time-series and are traceable to either broad-scale deformation (i.e. earthquakes) or discontinuities due to equipment changes and/or failures. Estimating these offsets accurately enables the identification of coseismic deformation estimates in the former case, and the removal of unwanted signals in the latter case which then allows tectonic rates to be estimated more accurately. We develop a method to estimate accurately discontinuities in time series of GPS positions at specified epochs, based on a so-called ‘offset series’. The offset series are obtained by varying the amount of GPS data before and after an event while estimating the offset. Two methods, a mean and a weighted mean method, are then investigated to produce the estimated discontinuity from the offset series. The mean method estimates coseismic offsets without making assumptions about geophysical processes that may be present in the data (i.e. tectonic rate, seasonal variations), whereas the weighted mean method includes estimating coseismic offsets with a model of these processes. We investigate which approach is the most appropriate given certain lengths of available data and noise within the time-series themselves. For the Sumatra–Andaman event, with 4.5 yr of pre-event data, we show that between 2 and 3 yr of post-event data are required to produce accurate offset estimates with the weighted mean method. With less data, the mean method should be used, but the uncertainties of the estimated discontinuity are larger

Present Day Kinematics of the Eastern California Shear Zone from a Geodetically Constrained Block Model

We use Global Positioning System (GPS) data from 1993–2000 to determine horizontal velocities of 65 stations in eastern California and western Nevada between 35° and 37° N. We relate the geodetic velocities to fault slip rates using a block model that enforces path integral constraints over geologic and geodetic time scales and that includes the effects of elastic strain accumulation on faults locked to a depth of 15 km. The velocity of the Sierra Nevada block with respect to Nevada is 11.1±0.3 mm/yr, with slip partitioned across the Death Valley, (2.8±0.5 mm/yr), Panamint Valley (2.5±0.8 mm/yr), and Airport Lake/Owens Valley (5.3±0.7/4.6±0.5 mm/yr) faults. The western Mojave block rotates at 2.1±0.8°/My clockwise, with 3.7±0.7 mm/yr of left lateral motion across the western Garlock Fault. We infer 11±2 mm/yr of right lateral motion across the Mojave region of the Eastern California Shear Zone

Identifying Trends in Masterplanning: A Typological Classification System

This document is the Accepted Manuscript version of the following article: Robert Adam, and Claire Jamieson, ‘Identifying trends in masterplanning: A typological classification system’, URBAN DESIGN International, Vol. 19 (4): 274-290, December 2014. The final publication is available at Springer via https://doi.org/10.1057/udi.2013.24.This article reports research carried out to develop a new typological method for the analysis of masterplans. This quantitative method of analysis can be used to produce comparative data that will help in the comparison of urban design typologies and their development over time. This article sets out the research to date, describing how the initial aims have developed from simple analysis to the creation of an analytical tool with wide applications. Comprising a detailed taxonomy of urban design features gathered from a wide database of recent and emerging masterplans, the system provides opportunities for further study such as trends, qualitative comparison against quantitative measurement, and comparison of aims and outcomes. This article will describe the methodology and process of research, while elaborating on the potential of the tool.Peer reviewedFinal Accepted Versio

In-situ evidence for dextral active motion at the Arabia-India plate boundary

International audienceThe Arabia-India plate boundary--also called theOwen fracture zone--is perhaps the least-known boundary among large tectonic plates1-6. Although it was identified early on as an example of a transform fault converting the divergent motion along the Carlsberg Ridge to convergent motion in the Himalayas7, its structure and rate of motion remains poorly constrained. Here we present the first direct evidence for active dextral strike-slip motion along this fault, based on seafloor multibeam mapping of the Arabia-India-Somalia triple junction in the northwest Indian Ocean. There is evidence for 12km of apparent strike-slip motion along the mapped segment of the Owen fracture zone, which is terminated to the south by a 50-km-wide pull-apart basin bounded by active faults. By evaluating these new constraints within the context of geodetic models of global plate motions, we determine a robust angular velocity for the Arabian plate relative to the Indian plate that predicts 2-4mmyr−1 dextral motion along the Owen fracture zone. This transformfault was probably initiated around 8 million years ago in response to a regional reorganization of plate velocities and directions8-11, which induced a change in configuration of the triple junction. Infrequent earthquakes of magnitude 7 and greater may occur along the Arabia-India plate boundary, unless deformation is in the formof aseismic creep

An example of secondary fault activity along the North Anatolian Fault on the NE Marmara Sea Shelf, NW Turkey

Seismic data on the NE Marmara Sea Shelf indicate that a NNE-SSW-oriented buried basin and ridge system exist on the sub-marine extension of the Paleozoic Rocks delimited by the northern segment of the North Anatolian Fault (NS-NAF), while seismic and multi-beam bathymetric data imply that four NW-SE-oriented strike-slip faults also exist on the shelf area. Seismic data indicate that NW-SE-oriented strike-slip faults are the youngest structures that dissect the basin-ridge system. One of the NW-SE-oriented faults (F1) is aligned with a rupture of the North Anatolian Fault (NAF) cutting the northern slope of the Cinarcik Basin. This observation indicates that these faults have similar characteristics with the NS-NAF along the Marmara Sea. Therefore, they may have a secondary relation to the NAF since the principle deformation zone of the NAF follows the Marmara Trough in that region. The seismic energy recorded on these secondary faults is much less than that on the NAF in the Marmara Sea. These faults may, however, produce a large earthquake in the long term

Seismic site characterization of the Kastelli (Kissamos) Basin in northwest Crete (Greece): Assessments using ambient noise recordings

Crete is actively seismic and site response studies are needed for estimating local site conditions subjected to seismic activity. In order to collect basic data, we performed ambient noise recordings to estimate the site response of the surface and near subsurface structure of the small-scale Kastelli Basin in northwest Crete. The spatial horizontal to vertical spectral ratios (HVSR) resonance pattern of the investigated sites in the centre of the Basin consists of either one or two peaks divided into low to high frequency range in different sites as follows: (a) in some sites only one amplified peak at low frequencies (0.6–1.2 Hz), (b) in other sites only one amplified peak at medium frequencies (2.9–8.5 Hz) and (c) in yet other sites two amplified peaks in the low to high frequency range (0.6–15.5 Hz). The investigated sites are amplified in the frequency range 0.6–15.5 Hz, while the amplitude reaches to a factor of 4 in the spectral ratios. The one HVSR amplified peak at low frequencies is related to locally soft or thick Quaternary deposits. Microtremors were measured in the coastal northwest part of the Basin in a well—lithified Cretaceous limestone site characterized by fractures and faults striking predominantly in a sector NNE to NNW. Sites of one amplified peak at medium frequencies are extended from coastal northwest to southwest delineating a structure striking to NNW. The two amplified peaks are attributed to shallow subsurface heterogeneities/irregularities, locally induced by fault zones and to the overlying Quaternary deposits. Spatial HVSR variations in the frequency and HVSR shape delineate four structures striking NNE, NNW and in a sector NW to WNW, crosscutting the dense populated Basin suggesting that microtremors could be a valuable tool for providing a first approximation of fault zone delineation at least for the Kastelli-Kissamos Basin. The Basin is classified into the X soil category of the Greek Seismic Code 2000.This work was implemented through the project entitled “Interdisciplinary Multi-Scale Research of Earth-quake Physics and Seismotectonics at the Front of the Hellenic Arc (IMPACT-ARC)” in the framework of action “ARCHIMEDES III—Support of Research Teams at TEI of Crete” (MIS380353) of the Operational Program “Education and Lifelong Learning” and is co-financed by the European Union (European Social Fund) and Greek national fund

nb3sn accelerator magnets the early days 1960s 1980s

Since Nb3Sn became available in the form of relatively long tapes in the early 1960s, it was considered for high-field magnets thanks to its high upper critical magnetic field and critical temperature. This chapter is a review of the effort accomplished by the community in the first 25 years of development of Nb3Sn accelerator magnets, and an attempt to understand why it took so long before this technology became successful