Tube-side mass transfer for hollow fibre membrane contactors operated in the low Graetz range

Transformation of the tube-side mass transfer coefficient derived in hollow fibre membrane contactors (HFMC) of different characteristic length scales (equivalent diameter and fibre length) has been studied when operated in the low Graetz range (Gz < 10). Within the low Gz range, mass transfer is generally described by the Graetz problem (Sh=3.67) which assumes that the concentration profile comprises a constant shape over the fibre radius. In this study, it is experimentally evidenced that this assumption over predicts mass transfer within the low Graetz range. Furthermore, within the low Gz range (below 2), a proportional relationship between the experimentally determined mass transfer coefficient (Kov) and the Graetz number has been identified. For Gz numbers below 2, the experimental Sh number approached unity, which suggests that mass transfer is strongly dependent upon diffusion. However, within this diffusion controlled region of mass transfer, tube-side fluid velocity remained important. For Gz numbers above 2, Sh could be satisfactorily described by extension to the Lévêque solution, which can be ascribed to the constrained growth of the concentration boundary layer adjacent to the fibre wall. Importantly this study demonstrates that whilst mass transfer in the low Graetz range does not explicitly conform to either the Graetz problem or classical Lévêque solution, it is possible to transform the experimentally derived overall mass transfer coefficient (Kov) between characteristic length scales (dh and L). This was corroborated by comparison of the empirical relationship determined in this study (Sh=0.36Gz) with previously published studies operated in the low Gz range. This analysis provides important insight for process design when slow tube-side flows, or low Schmidt numbers (coincident with gases) constrain operation of hollow fibre membrane contactors to the low Gz range

Changing epidemiology of methicillin-resistant Staphylococcus aureus colonization in paediatric intensive-care units

Community-associated methicillin-resistant S. aureus (CA-MRSA) accounts for a growing proportion of hospital-onset infections, and colonization is a risk factor. This study aimed to determine changes in the prevalence of CA-MRSA colonization in paediatric intensive-care units (ICUs). A total of 495 paediatric patients colonized with MRSA from neonatal, medical, surgical, and cardiac ICUs between 2001 and 2009 were identified. Isolates were characterized by spa type, staphylococcal cassette chromosome (SCC) mec type and the presence of the genes encoding Panton–Valentine leukocidin (PVL). The proportion of patients colonized with MRSA remained stable (average 3·2%). The proportion of isolates with spa type 1, SCCmec type IV and PVL increased over time to maximums in 2009 of 36·1% (P < 0·001), 54·2% (P = 0·03) and 28·9% (P = 0·003), respectively. Antibiotic susceptibility patterns showed increasing proportions susceptible to clindamycin, gentamicin, tetracycline and trimethoprim-sulfamethoxazole (P values <0·001). In conclusion, the proportion of MRSA-colonized children in ICUs with CA-MRSA increased significantly over time

Compositional Explanation of Types and Algorithmic Debugging of Type Errors

The type systems of most typed functional programming languages are based on the Hindley-Milner type system. A practical problem with these type systems is that it is often hard to understand why a program is not type correct or a function does not have the intended type. We suggest that at the core of this problem is the difficulty of explaining why a given expression has a certain type. The type system is not defined compositionally. We propose to explain types using a variant of the Hindley-Milner type system that defines a compositional type explanation graph of principal typings. We describe how the programmer understands types by interactive navigation through the explanation graph. Furthermore, the explanation graph can be the foundation for algorithmic debugging of type errors, that is, semi-automatic localisation of the source of a type error without even having to understand the type inference steps. We implemented a prototype of a tool to explore the usefulness of the proposed methods

Modelling fungal colonies and communities:challenges and opportunities

This contribution, based on a Special Interest Group session held during IMC9, focuses on physiological based models of filamentous fungal colony growth and interactions. Fungi are known to be an important component of ecosystems, in terms of colony dynamics and interactions within and between trophic levels. We outline some of the essential components necessary to develop a fungal ecology: a mechanistic model of fungal colony growth and interactions, where observed behaviour can be linked to underlying function; a model of how fungi can cooperate at larger scales; and novel techniques for both exploring quantitatively the scales at which fungi operate; and addressing the computational challenges arising from this highly detailed quantification. We also propose a novel application area for fungi which may provide alternate routes for supporting scientific study of colony behaviour. This synthesis offers new potential to explore fungal community dynamics and the impact on ecosystem functioning

Dissolved gas separation for engineered anaerobic wastewater systems

Dissolved gases produced within engineered anaerobic processes subsequently create a fugitive emission which can have financial, environmental and health and safety implications. Whilst desorption technology has been used to control dissolved gases in the drinking water sector, there is considerably less understanding of its deployment in wastewater for which there are numerous existing and emerging challenges. This review therefore focuses on existing and proposed technological approaches to gas desorption in engineered anaerobic wastewater processes, with specific emphasis on technology compatibility and downstream gas phase management. Simplified engineered solutions such as diffused aeration and multi-tray aerators appear robust solutions for implementation into wastewater. However, these processes are characterised by a low mass transfer coefficient and require high gas to liquid ratios (G/L) to achieve reasonable separation, which suggests their suitability is limited to small scale applications, in which gas recovery is not a priority. Packed columns and membrane contactors afford process intensification through increasing interfacial area which favours large scale applications; although both will require prefiltration technology to obviate media clogging. Vacuum or steam is the preferred driving force for separation when gas recovery is sought, while sweep-gas is energetically favoured. Sweep-gas has been used for gas recovery by operating at G/L toward the equilibrium value, which somewhat constrains mass transfer. Process selection must therefore be weighted on whole life cost, but will also be dependent upon process scale, financial (e.g. incentivisation) and non-financial (e.g. carbon) instruments, which are strongly influenced by regional policy

Optimisation of energetic and reproductive gains explains behavioural responses to environmental variation across seasons and years

Animals switch between inactive and active states, simultaneously impacting their energy intake, energy expenditure and predation risk, and collectively defining how they engage with environmental variation and trophic interactions. We assess daily activity responses to long‐term variation in temperature, resources and mating opportunities to examine whether individuals choose to be active or inactive according to an optimisation of the relative energetic and reproductive gains each state offers. We show that this simplified behavioural decision approach predicts most activity variation (R2 = 0.83) expressed by free‐ranging red squirrels over 4 years, as quantified through accelerometer recordings (489 deployments; 5066 squirrel‐days). Recognising activity as a determinant of energetic status, the predictability of activity variation aggregated at a daily scale, and the clear signal that behaviour is environmentally forced through optimisation of gain, provides an integrated approach to examine behavioural variation as an intermediary between environmental variation and energetic, life‐history and ecological outcomes.By assessing daily activity responses to long‐term variation in temperature, resources, and mating opportunities, we examine whether individuals choose to be active or inactive according to an optimization of energetic and reproductive gains. This simplified behavioural decision approach predicts most daily activity variation (R2 = 0.83) expressed by free‐ranging red squirrels over four years, as quantified through accelerometer recordings. Here we provide an integrated approach to examine behavioural variation as an intermediary between environmental variation and energetic, life‐history, and ecological outcomes.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/154889/1/ele13494_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/154889/2/ele13494.pd

delta C-13 Analysis of Mars Analog Carbonates Using Evolved Gas Cavity - Ringdown Spectrometry on the 2010 Arctic Mars Analog Svalbard Expedition (AMASE)

The 2010 Arctic Mars Analog Svalbard Expedition (AMASE) investigated two distinct geologic settings on Svalbard, using instrumentation and techniques in development for future Mars missions, such as the Mars Science Laboratory (MSL), ExoMars, and Mars Sample Return (MSR). The Sample Analysis at Mars (SAM) instrument suite, which will fly on MSL, was developed at Goddard Space Flight Center (GSFC), together with several partners. SAM consists of a quadrupole mass spectrometer (QMS), a gas chromatograph CGC), and a tunable laser spectrometer (TLS), which all analyze gases created by evolved gas analysis (EGA). The two sites studied represent "biotic" and "abiotic" analogs; the "biotic" site being the Knorringfjell fossil methane seep, and the "abiotic" site being the basaltic Sigurdfjell vent complex. The data presented here represent experiments to measure the carbon isotopic composition of carbonates from these two analogs using evolved gas analysis coupled with a commercial cavity ringdown CO2 isotopic analyzer (Picarro) as a proxy for the TLS on SAM

Evolved Gas Analysis of Mars Analog Samples from the Arctic Mars Analog Svalbard Expedition: Implications for Analyses by the Mars Science Laboratory

The 2011 Arctic Mars Analog Svalbard Expedition (AMASE) investigated several geologic settings on Svalbard, using methodologies and techniques being developed or considered for future Mars missions, such as the Mars Science Laboratory (MSL). The Sample Analysis at Mars (SAM) instrument suite on MSL consists of a quadrupole mass spectrometer (QMS), a gas chromatograph (GC), and a tunable laser spectrometer (TLS), which analyze gases created by pyrolysis of samples. During AMASE, a Hiden Evolved Gas Analysis-Mass Spectrometer (EGA-MS) system represented the EGA-QMS capability of SAM. Another MSL instrument, CheMin, will use x-ray diffraction (XRD) and x-ray fluorescence (XRF) to perform quantitative mineralogical characterization of samples. Field-portable versions of CheMin were used during AMASE. AMASE 2011 sites spanned a range of environments relevant to understanding martian surface materials, processes and habitability. They included the basaltic Sverrefjell volcano, which hosts carbonate globules, cements and coatings, carbonate and sulfate units at Colletth0gda, Devonian sandstone redbeds in Bockfjorden, altered basaltic lava delta deposits at Mt. Scott Keltie, and altered dolerites and volcanics at Botniahalvoya. Here we focus on SAM-like EGA-MS of a subset of the samples, with mineralogy comparisons to CheMin team results. The results allow insight into sample organic content as well as some constraints on sample mineralogy

Hybrid membrane distillation reverse electrodialysis configuration for water and energy recovery from human urine: an opportunity for off-grid decentralised sanitation

The integration of membrane distillation with reverse electrodialysis has been investigated as a sustainable sanitation solution to provide clean water and electrical power from urine and waste heat. Reverse electrodialysis was integrated to provide the partial remixing of the concentrate (urine) and diluate (permeate) produced from the membrane distillation of urine. Broadly comparable power densities to those of a model salt solution (sodium chloride) were determined during evaluation of the individual and combined contribution of the various monovalent and multivalent inorganic and organic salt constituents in urine. Power densities were improved through raising feed-side temperature and increasing concentration in the concentrate, without observation of limiting behaviour imposed by non-ideal salt and water transport. A further unique contribution of this application is the limited volume of salt concentrate available, which demanded brine recycling to maximise energy recovery analogous to a battery, operating in a ‘state of charge’. During recycle, around 47% of the Gibbs free energy was recoverable with up to 80% of the energy extractable before the concentration difference between the two solutions was halfway towards equilibrium which implies that energy recovery can be optimised with limited effect on permeate quality. This study has provided the first successful demonstration of an integrated MD-RED system for energy recovery from a limited resource, and evidences that the recovered power is sufficient to operate a range of low current fluid pumping technologies that could help deliver off-grid sanitation and clean water recovery at single household scale