Analyzing the Spectral Energy Cascade in Turbulent Channel Flow

An analysis of the spectral turbulent kinetic energy budget in a fully developed turbulent plane channel flow is performed. Direct numerical simulation data are evaluated at friction Reynolds numbers Reτ of 180 and 1000. The analysis is focused on the influence of the Reynolds number on the spectral cascade of energy and the corresponding energy cascade in physical space in the presence of inhomogeneity and anisotropy. The turbulent kinetic energy distribution is compared for both Reynolds numbers, and the relevant characteristics of the energy transfer process in a wall-bounded turbulent flow are described. Differences in energy cascade are noted between the Reynolds number at both low and high wavenumbers. The results of the analysis are further assessed with a comparison to an earlier study of spectral energy transfer at Reτ= 180

Clinical presentation and survival of smear-positive pulmonary tuberculosis patients of a University General Hospital in a developing country

From January 1995 to August 1997 we evaluated prospectively the clinical presentation, laboratory findings and short-term survival of smear-positive pulmonary tuberculosis (TB) patients who sought care at our hospital. After providing informed, written consent, the patients were interviewed and laboratory tests were performed. Information about survivorship and death was collected through September 1998. Eighty-six smear-positive pulmonary TB patients were enrolled; 26.7% were HIV-seropositive. Seventeen HIV-seronegative pulmonary TB patients (19.8%) presented chronic diseases in addition to TB. In the multiple logistic regression analysis a CD4+ cell count or = 50 years were independently associated with decreased survival. Among HIV-seronegative persons, the presence of an additional disease increased the risk of death of almost six-fold. Use of antiretroviral drugs was associated with a lower risk of death among HIV-seropositive smear-positive pulmonary TB patients (RH = 0.32, 95% CI 0.10-0.92). In our study smear-positive pulmonary TB patients had a low short-term survival rate that was strongly associated with HIV infection, age and co-morbidities. Therapy with antiretroviral drugs reduced the short-term risk of death among HIV-seropositive patients after TB diagnosis

Prediction of sunlight-driven CO2 conversion: producing methane from photovoltaics, and full system design for single-house application

ABSTRACT: CO2 capture and utilization (CCU) technologies are being immensely researched as means to close the anthropogenic carbon cycle. One approach known as artificial photosynthesis uses solar energy from photovoltaics (PV), carbon dioxide and water to generate hydrocarbon fuels, being methane (CH4) a preferential target due to the already in place infrastructures for its storage, distribution and consumption. Here, a model is developed to simulate a direct (1-step) solar methane production approach, which is studied in two scenarios: first, we compare it against a more conventional 2-step methane production route, and second, we apply it to address the energetic needs of concept buildings with usual space and domestic hot water heating requirements. The analysed 2-step process consists in the PV-powered synthesis of an intermediate fuel - syngas - followed by its conversion to CH4 via a Fischer -Tropsch (methanation) process. It was found that the 1-step route could be adequate to a domestic, small scale use, potentially providing energy for a single-family house, whilst the 2-step can be used in both small and large scale applications, from domestic to industrial uses. In terms of overall solar-to-CH4 energy efficiency, the 2-step method reaches 13.26% against the 9.18% reached by the 1-step method. Next, the application of the direct solar methane technology is analysed for domestic buildings, in different European locations, equipped with a combination of solar thermal collectors (STCs) and PV panels, in which the heating needs that cannot be fulfilled by the STCs are satisfied by the combustion of methane synthesized by the PV-powered electrolyzers. Various combinations of situations for a whole year were studied and it was found that this auxiliary system can produce, per m(2) of PV area, in the worst case scenario 23.6 g/day (0.328 kWh/day) of methane in Stockholm, and in the best case scenario 47.4 g/day (0.658 kWh/day) in Lisbon.info:eu-repo/semantics/publishedVersio

Silicon-based spin and charge quantum computation

Silicon-based quantum-computer architectures have attracted attention because of their promise for scalability and their potential for synergetically utilizing the available resources associated with the existing Si technology infrastructure. Electronic and nuclear spins of shallow donors (e.g. phosphorus) in Si are ideal candidates for qubits in such proposals due to the relatively long spin coherence times. For these spin qubits, donor electron charge manipulation by external gates is a key ingredient for control and read-out of single-qubit operations, while shallow donor exchange gates are frequently invoked to perform two-qubit operations. More recently, charge qubits based on tunnel coupling in P$_2^+$ substitutional molecular ions in Si have also been proposed. We discuss the feasibility of the building blocks involved in shallow donor quantum computation in silicon, taking into account the peculiarities of silicon electronic structure, in particular the six degenerate states at the conduction band edge. We show that quantum interference among these states does not significantly affect operations involving a single donor, but leads to fast oscillations in electron exchange coupling and on tunnel-coupling strength when the donor pair relative position is changed on a lattice-parameter scale. These studies illustrate the considerable potential as well as the tremendous challenges posed by donor spin and charge as candidates for qubits in silicon.Comment: Review paper (invited) - to appear in Annals of the Brazilian Academy of Science

Ergonomics applied to the development and evaluation of insoles for protective footwear

Knowledge of ergonomics/human factors plays an important role in the creation and design of safety shoes and insoles, contributing to worker protection, comfort, and stability. The purpose of this study is to compare previous insole designs and analyze the plantar pressure and gait pattern kinematics using the Oxford foot model protocol. The tests were performed comparing the environments on the three rockers of the gait, represented by the heel, midfoot, and forefoot, according to the classification of foot type. The analysis of plantar pressure, regarding its total and maximum distribution, showed that the innovative insole presents a better load distribution in terms of the maximum plantar pressure exerted in the hindfoot and forefoot regions. In the biomechanical analysis of gait, the five variables studied did not show variation in the normal mechanics of the foot in any of the three environments considered. The hallux joint was the one that presented the greatest divergences with the barefoot in terms of amplitude and variability, as expected.SHOE@FUTURE: Technological Solutions for Professional Footwear, POCI-01-0247-FEDER-033835, co-financed by the European Regional Development Fund (FEDER) through the Competitiveness and Internationalization Operational Program under the “Portugal 2020” Program. This work has been supported by FCT—Fundação para a Ciência e Tecnologia within the R&D Units Project Scope: UIDB/00319/2020

Influence of an Upper Limb Isometric Task in Perceived and Performance Fatigability of Elderly Subjects: A Quasi-Experimental Study

[Abstract] Isometric activity can be used as a strategy to improve health, fitness, and functional performance in the elderly population, but differences in fatigability may occur. This study aimed to understand fatigability behavior during an upper limb isometric task (ULIT) and the role of health status and physical activity in the fatigability of elderly participants. Thirty-two (32) elderly participants (72.5 ± 5.18 years) were instructed to perform ULIT. The Borg CR10 scale and task failure point (TTF) were used to measure perceived and performance fatigability. Self-reported measures were used to assess the quality of life and physical activity level. A significant relationship between perceived and performance fatigability was found only in the final phase of activity (p < 0.01). Significant correlations were found between perceived fatigability and the social functioning dimension (p < 0.05), and between performance fatigability (TTF) and BMI (p < 0.01), physical functioning (p < 0.01), and role functioning/physical (p < 0.05) dimensions. In conclusion, ULIT produces changes in fatigability of elderly people, which are positively related in the final stage of the activity. Changes in fatigability are negatively related to BMI. It is also negatively related to health, social functioning, physical functioning and role functioning/physical quality of life dimensions

Upper-Limb Kinematic Behavior and Performance Fatigability of Elderly Participants Performing an Isometric Task: A Quasi-Experimental Study

Upper-limb position-sustained tasks (ULPSIT) are involved in several activities of daily living and are associated with high metabolic and ventilatory demand and fatigue. In older people, this can be critical to the performance of daily living activities, even in the absence of a disability. Objectives: To understand the ULPSIT effects on upper-limb (UL) kinetics and performance fatigability in the elderly. Methods: Thirty-one (31) elderly participants (72.61 ± 5.23 years) performed an ULPSIT. The UL average acceleration (AA) and performance fatigability were measured using an inertial measurement unit (IMU) and time-to-task failure (TTF). Results: The findings showed significant changes in AA in the X- and Z-axes (p < 0.05). AA differences in women started earlier in the baseline cutoff in the X-axis, and in men, started earlier between cutoffs in the Z-axis. TTF was positively related to AA in men until 60% TTF. Conclusions: ULPSIT produced changes in AA behavior, indicative of movement of the UL in the sagittal plane. AA behavior is sex related and suggests higher performance fatigability in women. Performance fatigability was positively related to AA only in men, where movement adjustments occurred in an early phase, though with increased activity time

Renal tubular dysfunction in patients with American cutaneous leishmaniasis

Renal dysfunction seen in patients with American cutaneous leishmaniasis (ACL) has been attributed to the use of antimonials for treatment. To determine whether ACL itself causes tubular dysfunction, we measured renal function in 37 patients with ACL prior to their treatment and compared results to that in 10 healthy volunteers of similar mean age. None of the patients presented with glomerular dysfunction; however, 27 had a urinary concentrating defect. There was no statistical difference between groups in the pre- and post-desmopressin test of urine osmolality, but the post-test urine osmolality of the controls was significantly higher. Urinary AQP2 levels, determined by western blot of isolated exosomes, were found to be significantly lower in patients than in controls, whereas that of the cotransporter (NKCC2) was significantly higher. A urinary acidification defect (post-test pH greater than 5.50 following calcium chloride) was found in 15 patients. Pretest plasma bicarbonate was below normal in 12 patients as was the pretest plasma pH in 14. Expression of the Na/H exchanger (NHE3), H+-ATPase, and pendrin were all significantly higher in patients with ACL than in controls. A combined urinary concentration and acidification defect was found in 12 patients. Thus, the urinary concentrating defect of ACL may be caused by decreased AQP2, with increased NKCC2 compensatory. Pendrin upregulation may be related to the urinary acidification defect with increased NHE3 and H+-ATPase also compensatory. Hence, ACL can cause asymptomatic renal tubular dysfunction