65 research outputs found
Lunar laser ranging in infrfared at hte Grasse laser station
For many years, lunar laser ranging (LLR) observations using a green
wavelength have suffered an inhomogeneity problem both temporally and
spatially. This paper reports on the implementation of a new infrared detection
at the Grasse LLR station and describes how infrared telemetry improves this
situation. Our first results show that infrared detection permits us to densify
the observations and allows measurements during the new and the full Moon
periods. The link budget improvement leads to homogeneous telemetric
measurements on each lunar retro-reflector. Finally, a surprising result is
obtained on the Lunokhod 2 array which attains the same efficiency as Lunokhod
1 with an infrared laser link, although those two targets exhibit a
differential efficiency of six with a green laser link
Study of the atmospheric refraction in a single mode instrument - Application to AMBER/VLTI
International audienceThis paper presents a study of the atmospheric refraction and its effect on the light coupling efficiency in an instrument using single-mode optical fibers. We show the analytical approach which allowed us to assess the need to correct the refraction in J- and H-bands while observing with an 8-m Unit Telescope. We then developed numerical simulations to go further in calculations. The hypotheses on the instrumental characteristics are those of AMBER (Astronomical Multi BEam combineR), the near infrared focal beam combiner of the Very Large Telescope Interferometric mode (VLTI), but most of the conclusions can be generalized to other single-mode instruments. We used the software package caos (Code for Adaptive Optics Systems) to take into account the atmospheric turbulence effect after correction by the ESO system MACAO (Multi-Application Curvature Adaptive Optics). The opto-mechanical study and design of the system correcting the atmospheric refraction on AMBER is then detailed. We showed that the atmospheric refraction becomes predominant over the atmospheric turbulence for some zenith angles z and spectral conditions: for z larger than 30° in J-band for example. The study of the optical system showed that it allows to achieve the required instrumental performance in terms of throughput in J- and H-bands. First observations in J-band of a bright star, alpha Cir star, at more than 30° from zenith clearly showed the gain to control the atmospheric refraction in a single mode instrument, and validated the operating law
An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status
MATISSE is the second-generation mid-infrared spectrograph and imager for the
Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric
instrument will allow significant advances by opening new avenues in various
fundamental research fields: studying the planet-forming region of disks around
young stellar objects, understanding the surface structures and mass loss
phenomena affecting evolved stars, and probing the environments of black holes
in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the
spectral domain of current optical interferometers by offering the L and M
bands in addition to the N band. This will open a wide wavelength domain,
ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band)
/ 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared
imaging - closure-phase aperture-synthesis imaging - with up to four Unit
Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE
will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we
present one of the main science objectives, the study of protoplanetary disks,
that has driven the instrument design and motivated several VLTI upgrades
(GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a
description of the signal on the detectors and an evaluation of the expected
performances. We also discuss the current status of the MATISSE instrument,
which is entering its testing phase, and the foreseen schedule for the next two
years that will lead to the first light at Paranal.Comment: SPIE Astronomical Telescopes and Instrumentation conference, June
2016, 11 pages, 6 Figure
Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations
In this work, we present the first AMBER observations, of the Wolf-Rayet and
O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the
telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered
spectrally dispersed visibilities, as well as differential and closure phases,
with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret
these data in the context of a binary system with unresolved components,
neglecting in a first approximation the wind-wind collision zone flux
contribution. We show that the AMBER observables result primarily from the
contribution of the individual components of the WR+O binary system. We discuss
several interpretations of the residuals, and speculate on the detection of an
additional continuum component, originating from the free-free emission
associated with the wind-wind collision zone (WWCZ), and contributing at most
to the observed K-band flux at the 5% level. The expected absolute separation
and position angle at the time of observations were 5.1±0.9mas and
66±15° respectively. However, we infer a separation of
3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus
implies that the binary system lies at a distance of 368+38-13 pc, in agreement
with recent spectrophotometric estimates, but significantly larger than the
Hipparcos value of 258+41-31 pc
Near-Infrared interferometry of Eta Carinae with high spatial and spectral resolution using the VLTI and the AMBER instrument
We present the first NIR spectro-interferometry of the LBV Eta Carinae. The K
band observations were performed with the AMBER instrument of the ESO Very
Large Telescope Interferometer using three 8.2m Unit Telescopes with baselines
from 42 to 89m. The aim of this work is to study the wavelength dependence of
Eta Car's optically thick wind region with a high spatial resolution of 5 mas
(11 AU) and high spectral resolution. The medium spectral resolution
observations (R=1,500) were performed in the wavelength range around both the
HeI 2.059 micron and the Br gamma 2.166 micron emission lines, the high
spectral resolution observations (R=12,000) only in the Br gamma line region.
In the K-band continuum, a diameter of 4.0 +/-0.2 mas (Gaussian FWHM, fit range
28-89m) was measured for Eta Car's optically thick wind region. If we fit
Hillier et al. (2001) model visibilities to the observed AMBER visibilities, we
obtain 50 % encircled-energy diameters of 4.2, 6.5 and 9.6mas in the 2.17
micron continuum, the HeI, and the Br gamma emission lines, respectively. In
the continuum near the Br gamma line, an elongation along a position angle of
120+/-15 degrees was found, consistent with previous VLTI/VINCI measurements by
van Boekel et al. (2003). We compare the measured visibilities with predictions
of the radiative transfer model of Hillier et al. (2001), finding good
agreement. Furthermore, we discuss the detectability of the hypothetical hot
binary companion. For the interpretation of the non-zero differential and
closure phases measured within the Br gamma line, we present a simple geometric
model of an inclined, latitude-dependent wind zone. Our observations support
theoretical models of anisotropic winds from fast-rotating, luminous hot stars
with enhanced high-velocity mass loss near the polar regions.Comment: 22 pages, 14 figures, 2 tables; A&A in pres
Interferometric data reduction with AMBER/VLTI. Principle, estimators, and illustration
This is the author accepted manuscript. The final version is available from EDP Sciences via the DOI in this record.Aims. In this paper, we present an innovative data reduction method for single-mode interferometry. It has been specifically developed for the
AMBER instrument, the three-beam combiner of the Very Large Telescope Interferometer, but it can be derived for any single-mode interferometer.
Methods. The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the
instrument in order to obtain the calibration matrix that builds the linear relationship between the interferogram and the interferometric observable,
which is the complex visibility. Once the calibration procedure has been performed, the signal processing appears to be a classical least-square
determination of a linear inverse problem. From the estimated complex visibility, we derive the squared visibility, the closure phase, and the
spectral differential phase.
Results. The data reduction procedures have been gathered into the so-called amdlib software, now available for the community, and are presented
in this paper. Furthermore, each step in this original algorithm is illustrated and discussed from various on-sky observations conducted with the
VLTI, with a focus on the control of the data quality and the effective execution of the data reduction procedures. We point out the present limited
performances of the instrument due to VLTI instrumental vibrations which are difficult to calibrate.The AMBER project4 was founded by the French Centre
National de la Recherche Scientifique (CNRS), the Max Planck Institute für
Radioastronomie (MPIfR) in Bonn, the Osservatorio Astrofisico di Arcetri
(OAA) in Firenze, the French Region “Provence Alpes Côte D’Azur” and
the European Southern Observatory (ESO). The CNRS funding has been
made through the Institut National des Sciences de l’Univers (INSU) and its
Programmes Nationaux (ASHRA, PNPS, PNP).
The OAA co-authors acknowledge partial support from MIUR grants to the
Arcetri Observatory: A LBT interferometric arm, and analysis of VLTI interferometric
data and From Stars to Planets: accretion, disk evolution and
planet formation and from INAF grants to the Arcetri Observatory Stellar and
Extragalactic Astrophysics with Optical Interferometry. C. Gil work was supported
in part by the Fundação para a Ciência e a Tecnologia through project
POCTI/CTE-AST/55691/2004 from POCTI, with funds from the European program
FEDER
Constraining the wind launching region in Herbig Ae stars: AMBER/VLTI spectroscopy of HD 104237
This is the author accepted manuscript. The final version is available from EDP Sciences via the DOI in this record.Aims. We investigate the origin of the Brγ emission of the Herbig Ae star HD 104237 on Astronomical Unit (AU) scales.
Methods. Using AMBER/VLTI at a spectral resolution R = 1500 we spatially resolve the emission in both the Brγ line and the adjacent continuum.
Results. The visibility does not vary between the continuum and the Brγ line, even though the line is strongly detected in the spectrum, with a peak
intensity 35% above the continuum. This demonstrates that the line and continuum emission have similar size scales. We assume that the K-band
continuum excess originates in a “puffed-up” inner rim of the circumstellar disk, and discuss the likely origin of Brγ.
Conclusions. We conclude that this emission most likely arises from a compact disk wind, launched from a region 0.2–0.5 AU from the star, with
a spatial extent similar to that of the near infrared continuum emission region, i.e., very close to the inner rim location.This work has been partly supported by the
MIUR COFIN grant 2003/027003-001 and 025227/2004 to the INAFOsservatorio
Astrofisico di Arcetri. This project has benefited from
funding from the French Centre National de la Recherche Scientifique
(CNRS) through the Institut National des Sciences de l’Univers
(INSU) and its Programmes Nationaux (ASHRA, PNPS). The authors
from the French laboratories would like to thank the successive
directors of the INSU/CNRS directors. C. Gil work was supported
in part by the Fundac¸˜ao para a Ciˆencia e a Tecnologia through
project POCTI/CTE-AST/55691/2004 from POCTI,with funds from
the European program FEDER
Constraining the wind launching region in Herbig Ae stars: AMBER/VLTI spectroscopy of HD 104237
Astronomy and Astrophysics, 464, pp. 55-58, http://dx.doi.org./10.1051/0004-6361:20065719International audienc
An asymmetry detected in the disk of Kappa CMa with the AMBER/VLTI
International audienceAims. We study the geometry and kinematics of the circumstellar environment of the Be star Kappa CMa in the Br gamma emission line and its nearby continuum. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a spatial resolution of about 6 mas with a spectral resolution of 1500 to study the kinematics within the disk and to infer its rotation law. In order to obtain more kinematical constraints we also use an high spectral resolution Pa beta line profile obtain in December 2005 at the Observatorio do Pico do Dios, Brazil and we compile V/R line profile variations and spectral energy distribution data points from the literature. Results. Using differential visibilities and differential phases across the Br gamma line we detect an asymmetry in the disk. Moreover, we found that kappa CMa seems difficult to fit within the classical scenario for Be stars, illustrated recently by alpha Arae observations, i.e. a fast rotating B star close to its breakup velocity surrounded by a Keplerian circumstellar disk with an enhanced polar wind. Finally we discuss the possibility for kappa CMa to be a critical rotator with a Keplerian rotating disk and try to see if the detected asymmetry can be interpreted within the "one-armed" viscous disk framework
Disk and wind interaction in the young stellar object MWC 297 spatially resolved with AMBER/VLTI
This is the author accepted manuscript. The final version is available from EDP Sciences via the DOI in this record.The young stellar object MWC 297 is an embedded B1.5Ve star exhibiting strong hydrogen emission lines and a strong near-infrared continuum
excess. This object has been observed with the VLT interferometer equipped with the AMBER instrument during its first commissioning run.
AMBER/VLTI is currently the only near infrared interferometer that can observe spectrally dispersed visibilities. MWC 297 has been spatially
resolved in the continuum with a visibility of 0.50+0.08
−0.10 as well as in the Brγ emission line where the visibility decreases to 0.33±0.06. This change
in the visibility with wavelength can be interpreted by the presence of an optically thick disk responsible for the visibility in the continuum and
of a stellar wind traced by the Brγ emission line and whose apparent size is 40% larger. We validate this interpretation by building a model of the
stellar environment that combines a geometrically thin, optically thick accretion disk model consisting of gas and dust, and a latitude-dependent
stellar wind outflowing above the disk surface. The continuum emission and visibilities obtained from this model are fully consistent with the
interferometric AMBER data. They agree also with existing optical, near-infrared spectra and other broad-band near-infrared interferometric
visibilities. We also reproduce the shape of the visibilities in the Brγ line as well as the profile of this line obtained at an higher spectral resolution
with the VLT/ISAAC spectrograph, and those of the Hα and Hβ lines. The disk and wind models yield a consistent inclination of the system of
approximately 20◦. A picture emerges in which MWC 297 is surrounded by an equatorial flat disk that is possibly still accreting and an outflowing
wind that has a much higher velocity in the polar region than at the equator. The AMBER/VLTI unique capability of measuring spectral visibilities
therefore allows us for the first time to compare the apparent geometry of a wind with the disk structure in a young stellar system.The AMBER project4 was founded by the French Centre National de la
Recherche Scientifique (CNRS), the Max Planck Institute für Radioastronomie
(MPIfR) in Bonn, the Osservatorio Astrofisico di Arcetri (OAA) in Firenze,
the French Region "Provence Alpes Côte D’Azur" and the European Southern
Observatory (ESO). The CNRS funding has been made through the Institut
National des Sciences de l’Univers (INSU) and its Programmes Nationaux
(ASHRA, PNPS, PNP).
The OAA co-authors acknowledge partial support from MIUR grants to
the Arcetri Observatory: A LBT interferometric arm, and analysis of VLTI interferometric
data and From Stars to Planets: accretion, disk evolution and
planet formation and from INAF grants to the Arcetri Observatory Stellar and
Extragalactic Astrophysics with Optical Interferometry. C. Gil work was supported
in part by the Fundação para a Ciência e a Tecnologia through project
POCTI/CTE-AST/55691/2004 from POCTI, with funds from the European program
FEDER
- …