11,486 research outputs found
Accurate polarization within a unified Wannier function formalism
We present an alternative formalism for calculating the maximally localized
Wannier functions in crystalline solids, obtaining an expression which is
extremely simple and general. In particular, our scheme is exactly invariant
under Brillouin zone folding, and therefore it extends trivially to the
Gamma-point case. We study the convergence properties of the Wannier functions,
their quadratic spread and centers as obtained by our simplified technique. We
show how this convergence can be drastically improved by a simple and
inexpensive ``refinement'' step, which allows for very efficient and accurate
calculations of the polarization in zero external field.Comment: 9 pages, 4 figure
Quantifying the effects of background concentrations of crude oil pollution on sea ice albedo
Sea ice albedo plays an important role in modulating the climate of Earth and is affected by low background concentrations of oil droplets within the ice matrix that absorb solar radiation. In this study, the albedo response of three different types of bare sea ice (melting, first-year, and multi-year sea ice) are calculated at increasing mass ratios (0–1000 ng g−1) of crude oil by using a coupled atmosphere–sea ice radiative-transfer model (TUV-snow; Tropospheric Ultraviolet–Visible) over the optical wavelengths 400–700 nm. The different types of quasi-infinite-thickness sea ice exhibit different albedo responses to oil pollution, with a 1000 ng g−1 mass ratio of oil causing a decrease to 70.9 % in multi-year sea ice, 47.2 % in first-year sea ice, and 22.1 % in melting sea ice relative to the unpolluted albedo at a wavelength of 400 nm. The thickness of the sea ice is also an important factor, with realistic-thickness sea ices exhibiting similar results, albeit with a weaker albedo response for multi-year sea ice to 75.3 %, first-year sea ice to 66.3 %, and melting sea ice to 35.9 %. The type of oil also significantly affects the response of sea ice albedo, with a relatively opaque and heavy crude oil (Romashkino oil) causing a significantly larger decrease in sea ice albedo than a relatively transparent light crude oil (Petrobaltic oil). The size of the oil droplets polluting the oil also plays a minor role in the albedo response, with weathered submicrometre droplets (0.05–0.5 µm radius) of Romashkino oil being the most absorbing across the optical wavelengths considered. Therefore, the work presented here demonstrates that low background concentrations of small submicrometre- to micrometre-sized oil droplets have a significant effect on the albedo of bare sea ice. All three types of sea ice are sensitive to oil pollution; however, first-year sea ice and particularly melting sea ice are very sensitive to oil pollution.</p
Mortality in Transition: Study Protocol of the PrivMort Project, a multilevel convenience cohort study
Background: Previous research using routine data identified rapid mass privatisation as an important driver of
mortality crisis following the collapse of Communism in Central and Eastern Europe. However, existing studies on the
mortality crisis relying on individual level or routine data cannot assess both distal (societal) and proximal (individual)
causes of mortality simultaneously. The aim of the PrivMort Project is to overcome these limitations and to investigate
the role of societal factors (particularly rapid mass privatisation) and individual-level factors (e.g. alcohol consumption)
in the mortality changes in post-communist countries.
Methods: The PrivMort conducts large-sample surveys in Russia, Belarus and Hungary. The approach is unique in
comparing towns that have undergone rapid privatisation of their key industrial enterprises with those that experienced
more gradual forms of privatisation, employing a multi-level retrospective cohort design that combines data on the
industrial characteristics of the towns, socio-economic descriptions of the communities, settlement-level data, individual
socio-economic characteristics, and individuals’ health behaviour. It then incorporates data on mortality of different types
of relatives of survey respondents, employing a retrospective demographic approach, which enables linkage of historical
patterns of mortality to exposures, based on experiences of family members. By May 2016, 63,073 respondents provided
information on themselves and 205,607 relatives, of whom 102,971 had died. The settlement-level dataset contains
information on 539 settlements and 12,082 enterprises in these settlements in Russia, 96 settlements and 271 enterprises
in Belarus, and 52 settlement and 148 enterprises in Hungary.
Discussion: In addition to reinforcing existing evidence linking smoking, hazardous drinking and unemployment to
mortality, the PrivMort dataset will investigate the variation in transition experiences for individual respondents and their
families across settlements characterized by differing contextual factors, including industrial characteristi
Nonlocality of Kohn-Sham exchange-correlation fields in dielectrics
The theory of the macroscopic field appearing in the Kohn-Sham
exchange-correlation potential for dielectric materials, as introduced by
Gonze, Ghosez and Godby, is reexamined. It is shown that this Kohn-Sham field
cannot be determined from a knowledge of the local state of the material (local
crystal potential, electric field, and polarization) alone. Instead, it has an
intrinsically nonlocal dependence on the global electrostatic configuration.
For example, it vanishes in simple transverse configurations of a polarized
dielectric, but not in longitudinal ones.Comment: 4 pages, two-column style with 2 postscript figures embedded. Uses
REVTEX and epsf macros. Also available at
http://www.physics.rutgers.edu/~dhv/preprints/index.html#dv_gg
Examination of tryptamine-squaraine complexes as both colorimetric and fluorometric stains in gel electrophoresis
Markov Chain Monte Carlo Random Effects Modeling in Magnetic Resonance Image Processing Using the BRugs Interface to WinBUGS
A common feature of many magnetic resonance image (MRI) data processing methods is the voxel-by-voxel (a voxel is a volume element) manner in which the processing is performed. In general, however, MRI data are expected to exhibit some level of spatial correlation, rendering an independent-voxels treatment inefficient in its use of the data. Bayesian random effect models are expected to be more efficient owing to their information-borrowing behaviour.
To illustrate the Bayesian random effects approach, this paper outlines a Markov chain Monte Carlo (MCMC) analysis of a perfusion MRI dataset, implemented in R using the BRugs package. BRugs provides an interface to WinBUGS and its GeoBUGS add-on. WinBUGS is a widely used programme for performing MCMC analyses, with a focus on Bayesian random effect models. A simultaneous modeling of both voxels (restricted to a region of interest) and multiple subjects is demonstrated. Despite the low signal-to-noise ratio in the magnetic resonance signal intensity data, useful model signal intensity profiles are obtained. The merits of random effects modeling are discussed in comparison with the alternative approaches based on region-of-interest averaging and repeated independent voxels analysis.
This paper focuses on perfusion MRI for the purpose of illustration, the main proposition being that random effects modeling is expected to be beneficial in many other MRI applications in which the signal-to-noise ratio is a limiting factor
Propagation of Ultrasonic Waves in Liquid Mixtures and Intermolecular Forces II
The electronic properties of clean and sulfur-terminated surfaces of InSb(001) and (111) B are investigated using x-ray photoemission spectroscopy and high-resolution electron energy loss spectroscopy. The clean surfaces exhibit upward band bending (electron depletion) consistent with the charge neutrality level in InSb lying at the valence band maximum. The surface Fermi level to valence band maximum separation is increased for the S terminated compared with the clean surface, leading to flat bands and downward band bending (electron accumulation) for the (001) and (111) B surfaces, respectively. This is discussed in terms of compensation of native acceptor surface states. (C) 2008 American Institute of Physics. [DOI: 10.1063/1.3000567
Naturalness and Focus Points with Non-Universal Gaugino Masses
Relations between the gaugino masses have been shown to alleviate the degree
of fine-tuning in the MSSM. In this paper we consider specific models of
supersymmetry breaking with gravity mediation and demonstrate that within both
GUT and string constructions it is possible to generate these relations in a
natural way. We have numerically studied the degree of fine-tuning in these
models, including one-loop corrections, and have found regions of parameter
space that can satisfy all known collider constraints with fine-tunings less
than 20%. We discuss some of the phenomenological features of these models
within the regions of reduced fine-tuning.Comment: 31 pages, 21 figures. Version accepted for publication in Nuclear
Physics
Design and Field Test of a Mass Efficient Crane for Lunar Payload Handling and Inspection: The Lunar Surface Manipulation System
Devices for lifting, translating and precisely placing payloads are critical for efficient Earthbased construction operations. Both recent and past studies have demonstrated that devices with similar functionality will be needed to support lunar outpost operations. Lunar payloads include: a) prepackaged hardware and supplies which must be unloaded from landers and then accurately located at their operational site, b) sensor packages used for periodic inspection of landers, habitat surfaces, etc., and c) local materials such as regolith which require grading, excavation and placement. Although several designs have been developed for Earth based applications, these devices lack unique design characteristics necessary for transport to and use on the harsh lunar surface. These design characteristics include: a) composite components, b) compact packaging for launch, c) simple in-field reconfiguration and repair, and d) support for tele-operated or automated operations. Also, in contrast to Earth-based construction, where special purpose devices dominate a construction site, a lunar outpost will require versatile devices which provide operational benefit from initial construction through sustained operations. This paper will detail the design of a unique, high performance, versatile lifting device designed for operations on the lunar surface. The device is called the Lunar Surface Manipulation System to highlight the versatile nature of the device which supports conventional cable suspended crane operations as well as operations usually associated with a manipulator such as precise positioning where the payload is rigidly grappled by a tool attached to the tip of the device. A first generation test-bed to verify design methods and operational procedures is under development at the NASA Langley Research Center and recently completed field tests at Moses Lake Washington. The design relied on non-linear finite element analysis which is shown to correlate favorably with laboratory experiments. A key design objective, reviewed in this paper, is the device s simplicity, resulting from a focus on the minimum set of functions necessary to perform payload offload. Further development of the device has the potential for significant mass savings, with a high performance device incorporating composite elements estimated to have a mass less than 3% of the mass of the maximum lunar payload lifted at the tip. The paper will conclude with future plans for expanding the operational versatility of the device
A Modular, Reusable Latch and Decking System for Securing Payloads During Launch and Planetary Surface Transport
Efficient handling of payloads destined for a planetary surface, such as the moon or Mars, requires robust systems to secure the payloads during transport on the ground, in-space and on the planetary surface. In addition, mechanisms to release the payloads need to be reliable to ensure successful transfer from one vehicle to another. An efficient payload handling strategy must also consider the devices available to support payload handling. Cranes used for overhead lifting are common to all phases of payload handling on Earth. Similarly, both recent and past studies have demonstrated that devices with comparable functionality will be needed to support lunar outpost operations. A first generation test-bed of a new high performance device that provides the capabilities of both a crane and a robotic manipulator, the Lunar Surface Manipulation System (LSMS), has been designed, built and field tested and is available for use in evaluating a system to secure payloads to transportation vehicles. National Institute of Aerospace, Hampton Va 23662 A payload handling approach must address all phases of payload management including: ground transportation, launch, planetary transfer and installation in the final system. In addition, storage may be required during any phase of operations. Each of these phases requires the payload to be lifted and secured to a vehicle, transported, released and lifted in preparation for the next transportation or storage phase. A critical component of a successful payload handling approach is a latch and associated carrier system. The latch and carrier system should minimize requirements on the: payload, carrier support structure and payload handling devices as well as be able to accommodate a wide range of payload sizes. In addition, the latch should; be small and lightweight, support a method to apply preload, be reusable, integrate into a minimal set of hard-points and have manual interfaces to actuate the latch should a problem occur. A latching system which meets these requirements has been designed and fabricated and will be described in detail. This latching system works in conjunction with a payload handling device such as the LSMS, and the LSMS has been used to test first generation latch and carrier hardware. All tests have been successful during the first phase of operational evaluations. Plans for future tests of first generation latch and carrier hardware with the LSMS are also described
- …