Evaluación de la biosorción de cobre con cáscara de almendra

En este trabajo se analiza el potencial de la cáscara de almendra para su utilización como biosorbente de cobre presente en disoluciones acuosas. En primer lugar, se realizó una caracterización físico-química del biosorbente. Así, se ha determinado que los poros que posee la cáscara de almendra son mesoporos, con un ancho deporo medio de 54,5 Å y que la cantidad total de grupos activos es de 0,592 mmol/g, siendo el grupo carboxílico el mayoritario. A continuación, se analizó la influencia de las principales variables que intervienen en el proceso de biosorción. Se ha encontrado que el pH es uno de los parámetros más importantes que controlan la eliminación de cobre con cáscara de almendra, obteniéndose la máxima eficiencia del proceso a pH=5. El estudio cinético reveló que, en general, el proceso es rápido, aunque puede dividirse en dos etapas, una primera más rápida (primeros 20 minutos) y otra segunda etapa donde el proceso transcurre de forma más lenta. Se ha encontrado que el modelo de pseudo-segundo orden reproduce de forma adecuada el proceso. Por otra parte, el estudio del equilibrio mostró que a medida que aumenta la concentración inicial de cobre, se eleva la capacidad de biosorción del sólido hasta alcanzar un valor prácticamente constante para concentraciones superiores a 100 mg/L. El modelo de Langmuires el que mejor reproduce los resultados experimentales, obteniéndose una capacidad máxima de biosorción decobre de 9,44 mg/g

Cinética de la biosorción de Cr(VI) con hueso de aceituna

En este trabajo se ha estudiado la cinética de biosorción de cromo(VI) usando hueso de aceituna como sólido sorbente.Los resultados muestran que el Cr(VI) es en parte retirado por el hueso y en parte reducido a Cr(III) y que, a partir de un tiempo de contacto próximo a 300 minutos, el porcentaje retirado de Cr(VI) y Cr total se mantiene constante, lo que indica que no se produce ninguno de los dos procesos. Así mismo, la capacidad de eliminación de Cr (VI) que tiene el hueso de aceituna disminuye con el aumento del pH, siendo este descenso mucho más acusado a pH>2. Para el Cr total los valores de la capacidad de eliminación resultan inferiores a los obtenidos para Cr(VI), lo que pone de manifiesto el efecto dela reducción de Cr(VI) a Cr(III). Los resultados experimentalesse han ajustado a los modelos de pseudo-primer orden, pseudo-segundo orden, Elovich y difusión intraparticular, siendo el modelo de pseudo-segundo orden el que mejor reproduce la cinética del proceso en todas las condiciones experimentales utilizadas. Finalmente, el efecto de la temperatura en la cinética del proceso muestra que, para Cr(VI), la capacidad de biosorción y la constante cinética aumentan cuando la  temperatura se eleva de 25 a 60 ºC, permaneciendo ambos parámetros prácticamente constantes cuando la temperaturaaumenta hasta 80 ºC

Spectroscopic characterisation of the stellar content of ultra diffuse galaxies

Understanding the peculiar properties of Ultra Diffuse Galaxies (UDGs) via spectroscopic analysis is a challenging task requiring very deep observations and exquisite data reduction. In this work we perform one of the most complete characterisations of the stellar component of UDGs to date using deep optical spectroscopic data from OSIRIS at GTC. We measure radial and rotation velocities, star formation histories (SFH) and mean population parameters, such as ages and metallicities, for a sample of five UDG candidates in the Coma cluster. From the radial velocities, we confirm the Coma membership of these galaxies. We find that their rotation properties, if detected at all, are compatible with dwarf-like galaxies. The SFHs of the UDG are dominated by old (~ 7 Gyr), metal-poor ([M/H] ~ -1.1) and alpha-enhanced ([Mg/Fe] ~ 0.4) populations followed by a smooth or episodic decline which halted ~ 2 Gyr ago, possibly a sign of cluster-induced quenching. We find no obvious correlation between individual SFH shapes and any UDG morphological properties. The recovered stellar properties for UDGs are similar to those found for DDO44, a local UDG analogue resolved into stars. We conclude that the UDGs in our sample are extended dwarfs whose properties are likely the outcome of both internal processes, such as bursty SFHs and/or high-spin haloes, as well as environmental effects within the Coma cluster.Comment: Accepted for publication in MNRA

Life-cycle assessment of the thermal and catalytic pyrolysis over sepiolite of face masks

Since the start of the global COVID-19 pandemic, extensive quantities of face masks have been used and discarded. Most of these masks end up in landfills, causing a high environmental impact and no benefits. However, there are alternative ways to deal with this waste in a more sustainable way. For example, valorisation of face masks through pyrolysis has received special attention because it offers efficient application to produce a liquid oil that can be used as a diesel substitute and a solid char that can be used as an activated carbon substitute after activation. In this context, this study applies the Life-Cycle Assessment methodology to quantify and analyse the environmental impacts of different treatment scenarios based on the pyrolysis of surgical masks and FFP2 masks. It also compares their environmental performance with the conventional practice of landfilling. The scenarios studied include both thermal and catalytic pyrolysis by using sepiolite, a low-cost material abundant in Spain. Data on the pyrolysis process were obtained from laboratory experiments. It was found that the use of the produced oil as a diesel substitute very significantly reduces the environmental impact in all pyrolysis scenarios. Consequently, the pyrolysis of face masks can reduce the environmental impact caused by the treatment of this waste material. Furthermore, the thermal pyrolysis performs environmentally better than the catalytic pyrolysis. In all scenarios, freshwater ecotoxicity and marine ecotoxicity are the environmental impact categories that cause the highest environmental impact overall

Liquid hot water pretreatment and enzymatic hydrolysis as a valorization route of Italian green pepper waste to delivery free sugars

In this work, liquid hot water pretreatment (autohydrolysis) was used to improve enzymatic hydrolysis of a commonly consumed vegetable waste in Spain, Italian green pepper, to finally produce fermentable sugars. Firstly, the effect of temperature and contact time on sugar recovery during pretreatment (in insoluble solid and liquid fraction) was studied in detail. Then, enzymatic hydrolysis using commercial cellulase was performed with the insoluble solid resulting from pretreatment. The objective was to compare results with and without pretreatment. The results showed that the pretreatment step was effective to facilitate the sugars release in enzymatic hydrolysis, increasing the global sugar yield. This was especially notable when pretreatment was carried out at 180 °C for 40 min for glucose yields. In these conditions a global glucose yield of 61.02% was obtained. In addition, very low concentrations of phenolic compounds (ranging from 69.12 to 82.24 mg/L) were found in the liquid fraction from enzymatic hydrolysis, decreasing the possibility of fermentation inhibition produced by these components. Results showed that Italian green pepper is an interesting feedstock to obtain free sugars and prevent the enormous quantity of this food waste discarded annually

Spatial distribution of Cydia fagiglandana (Zeller) in an exploited holm oak (Quercus ilex L.) forest.

Cydia fagiglandana (Zeller) (Lepidoptera: Tortricidae) is a carpophagous insect which affects the quality andviability of the fruits of beech, oak and chestnut trees. The majority of the works on this species in holm oak woodsdealt with assessing its damages. No investigations have yet been performed on the spatial distribution of this pest,although this element is one of the key features to take in account in order to develop proper integrated managementprograms. The present study, performed during a four years period in an exploited holm oak forest area in SouthernSpain, investigated the spatial distribution of C. fagiglandana integrating classic methods based on dispersion ratesand distribution fitting together with the elaboration of population density maps based on GIS. Our results showedthat the infestation rate progressively decreased from 0.339 in 2001 to 0.102 in 2004. Density maps for C. fagiglandanaalso show an heterogeneous and aggregated distribution of this insect and a spatio-temporal stability in this area. It isconcluded that during the four years of the study inter-specific competition with the weevil Curculio elephas was thefactor that most affected the spatial distribution of C. fagiglandana in the experimental plot

Results of donor after cardiac death circulation activation: recuperation of spontaneous circulation analysis.

The activation procedure of a potential donor after cardiac death begins after recognition of a situation of unrecovered PCR patient meets the criteria donor after cardiac death. Still have to meet a number of medical conditions and logistical both for the potential donor becomes effective donor. The aim of this study is to describe this procedure and know the number of potential donors who finally become effective donors. Method: Collection of all activations procedure after cardiac death donor HU 12 de Octubre for 5 years (2009-2013). Data collection is performed on a web platform created for this purpose.post-print255 K