Thickness of the Martian crust: Improved constraints from geoid-to-topography ratios

International audienc

Statistics of Mars' topography from the Mars Orbiter Laser Altimeter: Slopes, correlations, and physical Models

Data obtained recently by the Mars Orbiter Laser Altimeter (MOLA) were used to study the statistical properties of the topography and slopes on Mars. We find that the hemispheric dichotomy, manifested as an elevation difference, can be described by long baseline tilts but in places is expressed as steeper slopes. The bimodal hypsometry of elevations on Mars becomes unimodal when referenced to the center of figure, contrary to the Earth, for which the bimodality is retained. However, ruling out a model in which the elevation difference is expressed in a narrow equatorial topographic step cannot be done by the hypsometry alone. Mars' slope distribution is longer tailed than those of Earth and Venus, indicating a lower efficiency of planation processes relative to relief-building tectonics and volcanics. We define and compute global maps of statistical estimators, including the interquartile scale, RMS and median slope, and characteristic decorrelation length of the surface. A correspondence between these parameters and geologic units on Mars is inferred. Surface smoothness is distinctive in the vast northern hemisphere plains, where slopes are typically <0.5°. Amazonis Planitia exhibits a variation in topography of <1 m over 35-km baselines. The region of hematite mineralization in Sinus Meridiani is also smooth, with median slopes lower than 0.4°, but does not form a closed basin. The shallower long-wavelength portion of the lowlands' topographic power spectrum relative to the highlands' can be accounted for by a simple model of sedimentation such as might be expected at an ocean's floor. The addition of another process such as cratering is necessary to explain the spectral slope in short wavelengths. Among their application, these MOLA-derived roughness measurements can help characterize sites for landing missions

Role of temperature-dependent viscosity and surface plates in spherical shell models of mantle convection

Layered viscosity, temperature-dependent viscosity, and surface plates have an important effect on the scale and morphology of structure in spherical models of mantle convection. We find that long-wavelength structures can be produced either by a layered viscosity with a weak upper mantle or temperature-dependent viscosity even in the absence of surface plates, corroborating earlier studies, However,combining the layered viscosity structure with a temperature-dependent viscosity results in structure with significantly shorter wavelengths. Our models show that the scale of convection is mainly controlled by the surface plates, supporting the previous two-dimensional studies. Our models with surface plates: layered and temperature-dependent viscosity, and internal heating explain mantle structures inferred from seismic tomography. The models show that hot upwellings initiate at the core-mantle boundary (CMB) with linear structures, and as they depart from CMB, the linear upwellings quickly change into quasi-cylindrical plumes that dynamically interact with the ambient mantle and surface plates while ascending through the mantle. A linear upwelling structure is generated again at shallow depths (<200 km) in the vicinity of diverging plate margins because of the surface plates. At shallow depths, cold downwelling sheets form at converging plate margins. The evolution of downwelling sheets depends on the mantle rheology. The temperature-dependent viscosity strengthens the downwelling sheets so that the sheet structure can be maintained throughout the mantle. The tendency for linear upwelling and downwelling structures to break into plume-like structures is stronger at higher Rayleigh numbers. Our models also show that downwellings tp first-order control surface plate motions and the locations and horizontal motion of upwellings. Upwellings tend to form at stagnation points predicted solely from the buoyancy forces of downwellings. Temperature-dependent viscosity greatly enhances tb: ascending velocity of developed upwelling plumes, and this may reduce the influence of global mantle flow on the motion of plumes. Our results can explain the anticorrelation between hotspot distribution and fast seismic wave speed anomalies in the lower mantle and may also have significant implications to the observed stationarity of hotspots

Chondrites as samples of differentiated planetesimals

Chondritic meteorites are unmelted and variably metamorphosed aggregates of the earliest solids of the solar system. The variety of metamorphic textures in chondrites motivated the “onion shell” model in which chondrites originated at varying depths within a parent body heated primarily by the short-lived radioisotope 26Al, with the highest metamorphic grade originating nearest the center. Allende and a few other chondrites possess a unidirectional magnetization that can be best explained by a core dynamo on their parent body, indicating internal melting and differentiation. Here we show that a parent body that accreted to >~200 km in radius by ~ 1.5 Ma after the formation of calcium–aluminum-rich inclusions (CAIs) would have a differentiated interior, and ongoing accretion would add a solid undifferentiated crust overlying a differentiated interior, consistent with formational and evolutionary constraints inferred for the CV parent body. This body could have produced a magnetic field lasting more than 10 Ma. This hypothesis represents a new model for the origin of some chondrites, presenting them as the unprocessed crusts of internally differentiated early planetesimals. Such bodies may exist in the asteroid belt today; the shapes and masses of the two largest asteroids, 1 Ceres and 2 Pallas, can be consistent with differentiated interiors, conceivably with small iron cores with hydrated silicate or ice–silicate mantles, covered with undifferentiated crusts.National Science Foundation (U.S.) (NSF Astronomy CAREER grant)Mitsui & Co. (U.S.A.), Inc. ( Mitsui Career Development Professorship)United States. National Aeronautics and Space Administration (NASA Origins grant)Massachusetts Institute of Technology (Victor P. Starr Career Development Professorship)United States. National Aeronautics and Space Administration (NASA/Dawn co-investigator grant

Planetary geosciences, 1989-1990

NASA's Planetary Geosciences Programs (the Planetary Geology and Geophysics and the Planetary Material and Geochemistry Programs) provide support and an organizational framework for scientific research on solid bodies of the solar system. These research and analysis programs support scientific research aimed at increasing our understanding of the physical, chemical, and dynamic nature of the solid bodies of the solar system: the Moon, the terrestrial planets, the satellites of the outer planets, the rings, the asteroids, and the comets. This research is conducted using a variety of methods: laboratory experiments, theoretical approaches, data analysis, and Earth analog techniques. Through research supported by these programs, we are expanding our understanding of the origin and evolution of the solar system. This document is intended to provide an overview of the more significant scientific findings and discoveries made this year by scientists supported by the Planetary Geosciences Program. To a large degree, these results and discoveries are the measure of success of the programs

Long-term variability of CO2 and O in the Mars upper atmosphere from MRO radio science data

We estimate the annual variability of CO2 and O partial density using approximately 6years of Mars Reconnaissance Orbiter (MRO) radio science data from August 2006 to January 2012, which cover three full Martian years (from the northern hemisphere summer of 28 to the northern hemisphere summer of 31). These two elements are the dominant species at the MRO periapsis altitude, constituting about 70-80% of the total density. We report the recovered annual cycle of CO2 and the annual and seasonal cycle of O in the upper atmosphere. Although no other observations are available at those altitudes, our results are in good agreement with the density measurements of the Mars Express Spectroscopy for Investigation of Characteristics of the Atmosphere of Mars, which uses stellar occultations between 60 and 130km to determine the CO2 variability, and with the Mars Global Reference Atmospheric Model 2010 for the O annual and seasonal variabilities. Furthermore, the updated model provides more reasonable MRO drag coefficients (CD), which are estimated to absorb mismodeling in the atmospheric density prediction. The higher content of dust in the atmosphere due to dust storms increases the density, so the CDs should compensate for this effect. The correlation between the drag coefficient and the dust optical depth, measured by the Mars Odyssey Thermal Emission Imaging System (THEMIS) instrument, increases from 0.4 to 0.8 with the a priori and adjusted models, respectively. The trend of CDs not only confirms a substantial improvement in the prediction of the atmospheric density with the updated model but also provides useful information for local dust storms, near MRO periapsis, that cannot be measured by the opacity level since THEMIS does not always sample the southern hemisphere evenly

Lunar Topography: Results from the Lunar Orbiter Laser Altimeter

The Lunar Orbiter Laser Altimeter (LOLA) onboard the Lunar Reconnaissance Orbiter (LRO) has been operating nearly continuously since July 2009, accumulating over 6 billion measurements from more than 2 billion in-orbit laser shots. LRO's near-polar orbit results in very high data density in the immediate vicinity of the lunar poles, with full coverage at the equator from more than 12000 orbital tracks averaging less than 1 km in spacing at the equator. LRO has obtained a global geodetic model of the lunar topography with 50-meter horizontal and 1-m radial accuracy in a lunar center-of-mass coordinate system, with profiles of topography at 20-m horizontal resolution, and 0.1-m vertical precision. LOLA also provides measurements of reflectivity and surface roughness down to its 5-m laser spot size. With these data LOLA has measured the shape of all lunar craters 20 km and larger. In the proposed extended mission commencing late in 2012, LOLA will concentrate observations in the Southern Hemisphere, improving the density of the polar coverage to nearly 10-m pixel resolution and accuracy to better than 20 m total position error. Uses for these data include mission planning and targeting, illumination studies, geodetic control of images, as well as lunar geology and geophysics. Further improvements in geodetic accuracy are anticipated from the use of re ned gravity fields after the successful completion of the Gravity Recovery and Interior Laboratory (GRAIL) mission in 2012

A Minimum Time for the Formation of Holden Northeast Fan, Mars

The recently discovered deposits of a channelized fan located northeast of Holden Crater preserve a history of vertical and lateral accretion and avulsion of many channels, indicating water flowed freely across the surface of the fan during its construction. These sedimentary deposits, however, do not unambiguously discriminate between a deltaic or purely riverine origin for the feature. By using a numerical model describing fan construction solely by river channels, we estimate a minimum formation time of several decades to centuries. A minimum value for the total volume of transporting fluid required to construct the fan is modest, 900 km3, and may not have required precipitation

Simulated recovery of Europa's global shape and tidal Love numbers from altimetry and radio tracking during a dedicated flyby tour

The fundamental scientific objectives for future spacecraft exploration of Jupiter's moon Europa include confirmation of the existence of subsurface ocean beneath the surface ice shell and constraints on the physical properties of the ocean. Here we conduct a comprehensive simulation of a multiple-flyby mission. We demonstrate that radio tracking data can provide an estimate of the gravitational tidal Love number k2 with sufficient precision to confirm the presence of a liquid layer. We further show that a capable long-range laser altimeter can improve determination of the spacecraft position, improve the k2 determination (2 (3-4% error), which is directly related to the amplitude of the surface tidal deformation. These measurements, in addition to the global shape accurately constrained by the long altimetric profiles, can yield further constraints on the interior structure of Europa. Key Points A multiple-flyby mission to Europa can recover key geophysical parameters Laser altimetry can uniquely and accurately recover the global shape of Europa Laser altimetry enables the recovery of h2 to constrain the ice shell thicknes