Análise de especiação de cobre e zinco empregando voltametria de redissolução anódica com pulso diferencial

This work describes methodologies for speciation analysis of the metals copper and zinc as total, total dissolved, labile, as well as complexation capacity (conditional stability constants and available ligand concentration), using the same technique, differential pulse anodic stripping voltammetry (DPASV). Several supporting electrolytes were tested, and the results showed that KNO3 and HNO3 resulted in voltamograms without interferences as well as excellent resolution for the total and labile fractions. The methodology using the DPASV technique allows a simple and low cost analysis of copper and zinc speciation, with high precision and sensitivity, with limits of quantification (LOQ) of 1.8 nmol L-1 for copper and 2.1 nmol L-1 for zinc

Metals impact into the Paranaguá Estuarine Complex (Brazil) during the exceptional flood of 2011

Abstract Particulate and dissolved metal concentrations were determined after the largest flood in the last 30 years on the east-west axis of the Paranaguá Estuarine Complex (PEC) and compared to the those of the dry period at two stations. Results confirmed that the flood greatly affected riverine outflows and the behavior of metals in the PEC. In particular, a sharp decrease in salinity was followed by extremely high SPM concentrations leading to a decrease in DO concentrations at both stations. For the dissolved phase, ANOSIM analysis showed a significant dissimilarity at each station between the sampled periods, whereas for the particulate phase this dissimilarity was found only for the samplings taken at the Antonina Station. KD values suggested dissolved Cu behavior was related to the presence of organic complexes and dissolved Mn had sediment resuspension of redox sediments and or/pore water injection as sources. Metal concentrations were lower than in polluted estuaries, though high enrichment factors found after the flood pointed to the influence of anthropogenic sources. In conclusion, the flood's influence was more evident at the Antonina Station, due to its location in the upper estuary, whereas in Paranaguá a high SPM content with low metal concentration was found, following the common pattern generally found in other marine systems subject to heavy rainfall events

Exploratory evaluation of iron and its speciation in surface waters of Admiralty Bay, King George Island, Antarctica

Abstract The determination of dissolved iron concentrations and speciation was conducted for the first time in surface seawater coastline samples collected during the austral summer of 2020 in Admiralty Bay, King George Island, Antarctica. The technique of competitive ligand exchange/adsorptive cathodic stripping voltammetry with 2,3-dihydroxynaphthalene as the competing ligand was evaluated, showing a sensitivity between 14.25 and 21.05 nA nmol L-1 min-1, with an LOD of 14 pmol L-1 and a mean blank contribution of 0.248 nmol L-1. Physicochemical parameters such as pH (7.85 ± 0.2), salinity (32.7 ± 0.8) and dissolved oxygen (51.3 ± 26.6%) were compatible with those of the literature; however, the average temperature (4.2 ± 0.8 °C) was higher, possibly as a reflection of global warming. The dissolved iron mean value was 18.9 ± 6.1 nmol L-1, with a total ligand concentration of 23.6 ± 12.2 nmol L-1 and a conditional stability complex constant of 12.2 ± 0.2, indicating humic substances as possible ligands. On average, the calculated free iron concentrations were 0.7 ± 0.3 pmol L-1. Relatively high concentrations of iron indicate a possible local source of Fe, likely predominantly from upwelling sediments and secondarily from ice-melting waters, which does not limit the growth of the phytoplankton

Pré-concentração de Cr(III) e análise de especiação de cromo empregando montmorilonita saturada com íons potássio

The clay mineral montmorillonite-K10 (MT), treated under acidic medium and saturated with potassium ions (MTK), was employed in sorption and desorption studies aiming the preconcentration of Cr(III) and the speciation analysis of chromium. The sorption process of Cr(III) was close to 100%, suggesting that MTK was a good material for Cr(III) preconcentration, although, the maximum recovery in HNO3 solution was near 89%. On the other hand, Cr(VI) practically was not retained in MTK, suggesting this material as an appropriate mineral phase to be used in speciation analysis of chromium in aqueous medium

Ingestion of microplastics by the chironomid Chironomus sancticaroli and effects on the microbiome in the presence of PBDEs

Microplastic particles in the environment can associate with persistent organic pollutants (POPs) due to the hydrophobic nature of plastics and organic chemicals. PBDEs (polybrominated diphenyl ethers) are widely used as flame-retardants in products such as textiles and soft furnishings, with the potential to leach into the environment and be associated with microplastics. If ingested, the gut environment of an organism may favour desorption of adsorbed chemicals due to gut condition. Therefore the ingestion of microplastic particles has implications for uptake and bioaccumulation of these chemicals. Furthermore the presence of microplastics and chemicals in the gut of an organism can also influence the gut environment itself. Gut microbiomes are known to hold a vital role in host metabolism, nutrition and immunity and as such understanding the influence of chemicals and microplastics on the gut microbiota is key

Metals impact into the Paranaguá Estuarine Complex (Brazil) during the exceptional flood of 2011

Abstract Particulate and dissolved metal concentrations were determined after the largest flood in the last 30 years on the east-west axis of the Paranaguá Estuarine Complex (PEC) and compared to the those of the dry period at two stations. Results confirmed that the flood greatly affected riverine outflows and the behavior of metals in the PEC. In particular, a sharp decrease in salinity was followed by extremely high SPM concentrations leading to a decrease in DO concentrations at both stations. For the dissolved phase, ANOSIM analysis showed a significant dissimilarity at each station between the sampled periods, whereas for the particulate phase this dissimilarity was found only for the samplings taken at the Antonina Station. KD values suggested dissolved Cu behavior was related to the presence of organic complexes and dissolved Mn had sediment resuspension of redox sediments and or/pore water injection as sources. Metal concentrations were lower than in polluted estuaries, though high enrichment factors found after the flood pointed to the influence of anthropogenic sources. In conclusion, the flood's influence was more evident at the Antonina Station, due to its location in the upper estuary, whereas in Paranaguá a high SPM content with low metal concentration was found, following the common pattern generally found in other marine systems subject to heavy rainfall events

Introdução de um novo indicador termometrico nas titulações de bases e estudo de procedimentos titulometricos para a determinação de acidez de petroleo

Orientador : Oswaldo E. S. GodinhoDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de QuimicaMestrad

Fotoprodução de peroxidos de hidrogenio em aguas naturais sob a ação da luz solar

Orientador: Wilson de Figueiredo JardimTese (doutorado) - Universidade Estadual de Campinas, Instituto de Fisica Gleb WataghinDoutorad

Aplicação de planejamento fatorial a protocolo de extração e fixação de sulfetos volatilizáveis por acidificação (SVA) em amostras de sedimento

The AVS is defined operationally as acid volatile sulfide, which is a controlling phase on the partition of some metallic species in sediments. A Factorial design was evaluated by means of 16 experiments and using four variables: temperature, extraction time, N2 flow, and volume of the S2- collection solution. The factors that contributed to the efficiency of the process were the extraction time and the N2 flow. Trapping of S2- was efficient in AAB. The S2- was quantified using a potentiometric procedure. Recovery tests for S2- concentrations varying from 1×10-5 to 1×10-4 mol L-1 were in the range from 93 to 116%