Business models, circular and green economy towards sustainability. A systematic literature review

The paper presents a systematic literature review (SLR) on the connection between business models and the adoption of the circular economy and the green economy towards sustainability. A classification is offered through which it is possible to understand the environmental, economic and social advantages that these components would be able to bring to the enterprise. We used the Scopus, Web of Science, PubMed and Google Scholar databases as the main source to collect papers. Initially, 387 papers were collected. Subsequently, we proceeded to review the contributions and, once the selection criteria were outlined, we analyzed and classified 84 publications as priorities. The SLR is performed through a bibliometric analysis using VOSviewer software. Finally, we elaborated the state of the art of this research topic for the future agenda

RESCUE MANAGEMENT AND ASSESSMENT OF STRUCTURAL DAMAGE BY UAV IN POST-SEISMIC EMERGENCY

Abstract. The increasing frequency of emergencies urges the need for a detailed and thorough knowledge of the landscape. The first hours after a disaster are not only chaotic and problematic, but also decisive to successfully save lives and reduce damage to the building stock. One of the most important factors in any emergency response is to get an adequate awareness of the real situation, what is only possible after a thorough analysis of all the available information obtained through the Italian protocol Topography Applied to Rescue. To this purpose geomatic tools are perfectly suited to create, manage and dynamically enrich an organized archive of data to have a quick and functional access to information useful for several types of analysis, helping to develop solutions to manage the emergency and improving the success of rescue operations. Moreover, during an emergency like an earthquake, the conventional inspection to assess the damage status of buildings requires special tools and a lot of time. Therefore, given the large number of buildings requiring safety measures and rehabilitation, efficient use of limited resources such as time and equipment, as well as the safety of the involved personnel are important aspects. The applications shown in the paper are intended to underline how the above-mentioned objective, in particular the rehabilitation interventions of the built heritage, can be achieved through the use of data acquired from UAV platform integrated with geographic data stored in GIS platforms

Management at the service of research: ReOmicS, a quality management system for omics sciences

Management and research represent a binomial almost unknown, whose potentialities and requirements have not yet been fully exploited even if, recently, the scientific and social communities have felt the burden of producing results and data requiring at the same time reproducibility, reliability, safety and efficacy of the discoveries, as well as a profitable use of resources. A Quality Management System (QMS) could represent a valid tool for these purposes, improving the quality of the research. The research community could ask whether and how it is possible to apply this approach in a research laboratory without hindering their creativity, and what the possible benefits might be. On the other hand, an international standard for a quality management system appropriate for a research laboratory is yet to come. The choice, the design and the application of a QMS, inspired by the Good Laboratory Practices, in a research laboratory specialized on “omics” sciences, is fully described in this paper. Its application has already shown good outcomes as testified by specific metric of efficiency and effectiveness. The approach is innovative as there is no obvious requirement for research laboratories to develop and define quality objectives. The paper highlights how the QMS approach enhances the relationship with public and private sectors by increasing customer confidence and loyalty, as well as improving the overall performance of the laboratory in terms of throughput and value of research. These results encourage proposing it as a QMS model providing a new and scalable operational strategy to be applied in a research environment with the same target and even in a generic research laboratory

Significance of the VELACS Project to the Solution of Boundary Value Problems in Geotechnical Engineering

The VELACS project was conducted in order to improve existing methods for the analysis of the consequences of soil liquefaction. The project showed that centrifuge studies are repeatable only under carefully controlled conditions. Most procedures were able to predict the onset of liquefaction in contractive soils, but only effective stress based fully coupled nonlinear procedures were able to predict deformations due to liquefaction· None of the currently available procedures could simulate the behavior of dilative soils adequately. Problems were attributed to improper constitutive model implementation and inadequate calibration. An example to evaluate the behavior of a flow slide observed in a dynamic centrifuge test is presented. Numerical simulations of deformations with a finite deformation formulation showed that the main core of the embankment remained stable after shaking. This is in agreement with the observed behavior

Smart ECM-based electrospun biomaterials for skeletal muscle regeneration

The development of smart and intelligent regenerative biomaterials for skeletal muscle tissue engineering is an ongoing challenge, owing to the requirement of achieving biomimetic systems able to communicate biological signals and thus promote optimal tissue regeneration. Electrospinning is a well-known technique to produce fibers that mimic the three dimensional microstructural arrangements, down to nanoscale and the properties of the extracellular matrix fibers. Natural and synthetic polymers are used in the electrospinning process; moreover, a blend of them provides composite materials that have demonstrated the potential advantage of supporting cell function and adhesion. Recently, the decellularized extracellular matrix (dECM), which is the noncellular component of tissue that retains relevant biological cues for cells, has been evaluated as a starting biomaterial to realize composite electrospun constructs. The properties of the electrospun systems can be further improved with innovative procedures of functionalization with biomolecules. Among the various approaches, great attention is devoted to the “click” concept in constructing a bioactive system, due to the modularity, orthogonality, and simplicity features of the “click” reactions. In this paper, we first provide an overview of current approaches that can be used to obtain biofunctional composite electrospun biomaterials. Finally, we propose a design of composite electrospun biomaterials suitable for skeletal muscle tissue regeneration

Performance of ALICE pixel prototypes in high energy beams

The two innermost layers of the ALICE inner tracking system are instrumented with silicon pixel detectors. Single chip assembly prototypes of the ALICE pixels have been tested in high energy particle beams at the CERN SPS. Detection efficiency and spatial precision have been studied as a function of the threshold and the track incidence angle. The experimental method, data analysis and main results are presented.Comment: 10 pages, 9 figures, contribution to PIX2005 Workshop, Bonn (Germany), 5-8 September 200

Beam Test Performance and Simulation of Prototypes for the ALICE Silicon Pixel Detector

The silicon pixel detector (SPD) of the ALICE experiment in preparation at the Large Hadron Collider (LHC) at CERN is designed to provide the precise vertex reconstruction needed for measuring heavy flavor production in heavy ion collisions at very high energies and high multiplicity. The SPD forms the innermost part of the Inner Tracking System (ITS) which also includes silicon drift and silicon strip detectors. Single assembly prototypes of the ALICE SPD have been tested at the CERN SPS using high energy proton/pion beams in 2002 and 2003. We report on the experimental determination of the spatial precision. We also report on the first combined beam test with prototypes of the other ITS silicon detector technologies at the CERN SPS in November 2004. The issue of SPD simulation is briefly discussed.Comment: 4 pages, 5 figures, prepared for proceedings of 7th International Position Sensitive Detectors Conference, Liverpool, Sept. 200

Preparation of immunotoxin herceptin-botulinum and killing effects on two breast cancer cell lines

Background: Worldwide, breast cancer is the most common cancer diagnosed among women and a leading cause of cancer deaths. The age of onset in Iran has become reduced by a decade for unknown reasons. Herceptin, a humanized monoclonal antibody, is a target therapy for breast cancer cells with over expression of HER2-neu receptors, but it is an expensive drug with only 20 beneficial rate of survival. This study introduces a novel approach to enhance the efficacy of this drug through immunoconjugation of the antibody to botulinum toxin. Decreasing the cost and adverse effects of the antibody were secondary goals of this study. Materials and Methods: Botulinum toxin was conjugated with Herceptin using heterobifunctional cross linkers, succinimidyl acetylthiopropionate (SATP) and sulfo-succinimidyl-4-(N-maleimidomethyl) cyclohexane-1-carboxylate (SMCC) according to the supplier's guidelines and tested on two breast cancer cell lines: SK-BR-3 and BT-474. Toxin and Herceptin were also used separately as controls. The cytotoxicity assay was also performed using the new bioconjugate on cultured cells with Alamar blue and a fluorescence plate reader. Results: Herceptin-Toxin bioconjugation significantly improved Herceptin efficacy on both breast cancer cell lines when compared to the control group. Conclusions: Toxin-Herceptin bioconjugation can be a potential candidate with increased efficiency for treating breast cancer patients with over expression of the HER2 receptor