Phase holograms in PMMA with proximity effect correction

Complex computer generated phase holograms (CGPH's) have been fabricated in PMMA by partial e-beam exposure and subsequent partial development. The CGPH was encoded as a sequence of phase delay pixels and written by the JEOL JBX-5D2 E-beam lithography system, a different dose being assigned to each value of phase delay. Following carefully controlled partial development, the pattern appeared rendered in relief in the PMMA, which then acts as the phase-delay medium. The exposure dose was in the range 20-200 micro-C/sq cm, and very aggressive development in pure acetone led to low contrast. This enabled etch depth control to better than plus or minus lambda(sub vis)/60. That result was obtained by exposing isolated 50 micron square patches and measuring resist removal over the central area where the proximity effect dose was uniform and related only to the local exposure. For complex CGPH's with pixel size of the order of the e-beam proximity effect radius, the patterns must be corrected for the extra exposure caused by electrons scattered back up out of the substrate. This has been accomplished by deconvolving the two-dimensional dose deposition function with the desired dose pattern. The deposition function, which plays much the same role as an instrument response function, was carefully measured under the exact conditions used to expose the samples. The devices fabricated were designed with 16 equal phase steps per retardation cycle, were up to 1 cm square, and consisted of up to 100 million 0.3-2.0 micron square pixels. Data files were up to 500 MB long and exposure times ranged to tens of hours. A Fresnel phase lens was fabricated that had diffraction limited optical performance with better than 85 percent efficiency

Diffractive optical elements on non-flat substrates using electron beam lithography

The present disclosure describes a technique for creating diffraction gratings on curved surfaces with electron beam lithography. The curved surface can act as an optical element to produce flat and aberration-free images in imaging spectrometers. In addition, the fabrication technique can modify the power structure of the grating orders so that there is more energy in the first order than for a typical grating. The inventors noticed that by using electron-beam lithography techniques, a variety of convex gratings that are well-suited to the requirements of imaging spectrometers can be manufactured

Suspended liquid particle disturbance on laser-induced blast wave and low density distribution

The impurity effect of suspended liquid particles on the laser-induced gas breakdown was experimentally investigated in quiescent gas. The focus of this study is the investigation of the influence of the impurities on the shock wave structure as well as the low density distribution. A 532 nm Nd:YAG laser beam with an 188 mJ/pulse was focused on the chamber filled with suspended liquid particles 0.9 ± 0.63 μm in diameter. Several shock waves are generated by multiple gas breakdowns along the beam path in the breakdown with particles. Four types of shock wave structures can be observed: (1) the dual blast waves with a similar shock radius, (2) the dual blast waves with a large shock radius at the lower breakdown, (3) the dual blast waves with a large shock radius at the upper breakdown, and (4) the triple blast waves. The independent blast waves interact with each other and enhance the shock strength behind the shock front in the lateral direction. The triple blast waves lead to the strongest shock wave in all cases. The shock wave front that propagates toward the opposite laser focal spot impinges on one another, and thereafter a transmitted shock wave (TSW) appears. The TSW interacts with the low density core called a kernel; the kernel then longitudinally expands quickly due to a Richtmyer-Meshkov-like instability. The laser-particle interaction causes an increase in the kernel volume which is approximately five times as large as that in the gas breakdown without particles. In addition, the laser-particle interaction can improve the laser energy efficiency

Liquid crystal blazed grating beam deflector

A multiple-angle liquid crystal blazed grating beam deflector has been developed. It consists of a stack of liquid crystal blazed gratings where each layer can deflect incident light with very high efficiency into one of two different directions depending on the driving condition. Four steering angles (10.8 degrees, 7.2 degrees, 3.6 degrees, 0 degrees) with about 70% diffraction efficiency are demonstrated with 15 V. The device's working principle, design considerations, fabrication process, and characterization results are described

Continuous wave room temperature external ring cavity quantum cascade laser

An external ring cavity quantum cascade laser operating at ∼5.2 μm wavelength in a continuous-wave regime at the temperature of 15 °C is demonstrated. Out-coupled continuous-wave optical powers of up to 23 mW are observed for light of one propagation direction with an estimated total intra-cavity optical power flux in excess of 340 mW. The uni-directional regime characterized by the intensity ratio of more than 60 for the light propagating in the opposite directions was achieved. A single emission peak wavelength tuning range of 90 cm-1 is realized by the incorporation of a diffraction grating into the cavity

Conflict of interest: A tenacious ethical dilemma in public health policy not only in clinical practice/research

In addition to the ethical practice of individual health professionals, bioethical debate about conflict of interest (CoI) must include the institutional ethics of public policy-making, as failure to establish independence from powerful stakeholder influence may pervert public health goals. All involved in public policy processes are accountable for CoI, including experts, scientists, professionals, industry and government officials. The liquor industry in South Africa is presented as a case study. Generic principles of how to identify, manage and address CoI are discussed. We propose that health professionals and policy makers should avoid partnering with industries that are harmful to health. Regarding institutional CoI, we recommend that there should be effective policies, procedures and processes for governing public-private joint ventures with such industries. These include arms-length funding, maintaining the balance between contesting vested interests, and full disclosure of the identity and affiliations of all participants in structures and reports pertaining to public policy-making

Liquid-crystal blazed-grating beam deflector

A transmission-type nonmechanical multiple-angle beam-steering device that uses liquid-crystal blazed grating has been developed. Sixteen steering angles with a contrast ratio of 18 has been demonstrated. A detailed analysis of the Liquid-crystal and poly(methyl methacrylate) blazed-grating deflector was carried out to provide guidance during the deflector's development. A manufacturing offset compensation technique is proposed to improve the device's performance greatly. A hybrid approach utilizing electrically generated blazed grating combined with the cascading approach described here yields in excess of 500 deflecting angles. (C) 2000 Optical Society of America OCIS codes: 050.1970, 230.3720, 230.2090, 050.1940

Harmonic generation and energy transport in dielectric and semiconductors at visible and UV wavelengths: the case of GaP

We study inhibition of absorption, transparency, energy and momentum transport of the inhomogeneous component of harmonic pulses in dielectrics and semiconductors, at visible and UV wavelengths, focusing on materials like GaP. In these spectral regions GaP is characterized by large absorption, metallic behavior or a combination of both. We show that phase locking causes the generated inhomogeneous signals to propagate through a bulk metallic medium without being absorbed, that is occurs even in centrosymmetric materials via the magnetic Lorentz force, and that the transport of energy and momentum is quite peculiar and seemingly anomalous. These results make it clear that there are new opportunities in ultrafast nonlinear optics and nano-plasmonics in new wavelength ranges.Comment: 16 pages, 5 figures, 1 vide

Parity forbidden excitations of Sr2CuO2Cl2 revealed by optical third-harmonic spectroscopy

We present the first study of nonlinear optical third harmonic generation in the strongly correlated charge-transfer insulator Sr2CuO2Cl2. For fundamental excitation in the near-infrared, the THG spectrum reveals a strongly resonant response for photon energies near 0.7 eV. Polarization analysis reveals this novel resonance to be only partially accounted for by three-photon excitation to the optical charge-transfer exciton, and indicates that an even-parity excitation at 2 eV, with a_1g symmetry, participates in the third harmonic susceptibility.Comment: Requires RevTeX v4.0beta

Vacuum Squeezing in Atomic Media via Self-Rotation

When linearly polarized light propagates through a medium in which elliptically polarized light would undergo self-rotation, squeezed vacuum can appear in the orthogonal polarization. A simple relationship between self-rotation and the degree of vacuum squeezing is developed. Taking into account absorption, we find the optimum conditions for squeezing in any medium that can produce self-rotation. We then find analytic expressions for the amount of vacuum squeezing produced by an atomic vapor when light is near-resonant with a transition between various low-angular-momentum states. Finally, we consider a gas of multi-level Rb atoms, and analyze squeezing for light tuned near the D-lines under realistic conditions.Comment: 10 pages, 6 figures; Submitted to PR