1,308 research outputs found
Recommended from our members
Energy subsidies at times of economic crisis: A comparative study and scenario analysis of Italy and Spain
From 2005-2012, Spain and Italy saw significant investment in renewable energy, most notably in onshore wind and solar, driven by generous subsidies, the expectation of rising carbon prices and falling renewables (especially solar panel) costs. As a result of the Global Financial Crisis, both countries were faced with massive fiscal deficits and were forced to curtail their renewable support schemes, although these efforts took several years to take effect after the onset of the initial crisis. Ironically, both Spain and Italy incurred the lion's share of their liability for renewables support after the onset of the crisis particularly because of the rapid drop in costs of solar PV panels, while subsidy levels remained high. In spite of changes to their support regimes, Italy is likely to meet its 2020 climate and renewable targets, whereas Spain is unlikely to meet its 2020 renewables target based on current trajectories. Following a comparative historical survey of the two large EU member states, we present a scenario analysis that contrasts alternative futures of 2030 where renewable support remain at current levels (essentially zero) or is revived and where carbon prices stay at current low levels (€5/t CO2) or rises to levels needed to accomplish the proposed 40% EU 2030 reduction target. We find that, by 2030, in large parts of Spain, solar PV will be cost-competitive even under low-carbon price and low renewable support regimes, whereas concentrated solar power (CSP) and onshore wind, will require at least either a sustained renewable support regime or a high carbon price to become cost competitive. In Italy, solar PV becomes cost competitive in the low-carbon, low-renewable support scenario except when fossil fuel prices are unusually low. By 2030, there would be large-scale penetration of onshore wind and geothermal in Italy if there is either a high-carbon price or a high renewable support regime or both. In general, if the current levels of carbon price were to exist post-2020, both Italy and Spain would find it rather difficult to increase the penetration of renewables in their electricity mix. A high subsidy world, on the other hand, would be result in the most favourable outcome, particularly for Spain, although it may incur additional costs in comparison to a high carbon price world.Spai
Stakeholder Management Strategies in Infrastructure Megaprojects – A Dimensions of Power Perspective
Infrastructure megaprojects involve managing external stakeholders with diverse interests. The existing governance mechanisms such as contracts and conformance to standards are not possible with these external stakeholders as they are not accountable to the project. There are records of underperformance of megaprojects as they fail to manage the stakeholders who exist across a permeable boundary. While there are instances of various strategies used by the project team in managing these external stakeholders, the relation between strategies and stakeholder category is still unexplored. We argue that the dimensions of power framework can help make sense of the strategies in practice by the project team. Hence, using the case study of a metro rail project in India, we firstly categorize the external stakeholders into stakeholders in land acquisition and stakeholders in existing services. We then unearth the strategies devised by the project team in managing these external stakeholders. The strategies identified from the case are: 1) use of persuasion, 2) coordination by deputation, 3) give and take behavior, 4) enabling design flexibility, and 5) extra work for stakeholders. We then use the dimensions of power framework to explain these strategies and understand the resources available with the project team such as recruitment discretion, government backing and fund discretion. Finally, we explore the link between project team strategies and stakeholder categories. It is observed that the ‘give and take’ strategy works with legal landholders in land acquisition and ‘extra work for stakeholders’ works with stakeholders in existing services who are affected during construction. ‘Enabling design flexibility’ works for all stakeholders who express concern over the proposed design. ‘Coordination by deputation’ works with all government employees across all the categories of external stakeholders
Bioinspired electrohydrodynamic ceramic patterning of curved metallic substrates
Template-assisted electrohydrodynamic atomisation (TAEA) has been used for the first time to pattern curved metallic surfaces. Parallel lines of ceramic titania (TiO2) were produced on titanium substrates, convex and concave with diameters of ~25 mm, at the ambient temperature. Optimal results were obtained with 4 wt% TiO2 in ethanol suspension deposited over 300 s during stable cone-jetting at 20 µl/min, 10kV and collection distance 80 mm. A high degree of control over pattern line width, interline spacing and thickness were achieved. Nanoindentation load-displacement curves were continuous for the full loading and unloading cycle, indicating good adhesion between pattern and substrate. At a loading rate of 1 μN/s and a hold time of 1 s, pattern hardness decreased as load increased up to 7 μN and remained at 0·1 GPa up to higher loads. Elastic modulus behaved similarly, and both were not sensitive to loading rate. The effect of heat treatment to further consolidate the patterned deposits was also investigated. Hardness of the patterns was not markedly affected by heating. This work shows that TAEA is highly controllable and compatible on a range of substrate geometries. Extending TAEA capabilities from flat to curved surfaces, enabling the bioactive patterning of different surface geometries, takes this technology closer to orthopaedic engineering applications
Analysis of homogeneous turbulent reacting flows
Full turbulence simulations at low Reynolds numbers were made for the single-step, irreversible, bimolecular reaction between non-premixed reactants in isochoric, decaying homogeneous turbulence. Various initial conditions for the scalar field were used in the simulations to control the initial scalar dissipation length scale, and simulations were also made for temperature-dependent reaction rates and for non-stoichiometric and unequal diffusivity conditions. Joint probability density functions (pdf's), conditional pdf's, and various statistical quantities appearing in the moment equations were computed. Preliminary analysis of the results indicates that compressive strain-rate correlates better than other dynamical quantities with local reaction rate, and the locations of peak reaction rates seem to be insensitive to the scalar field initial conditions
Candida tropicalis spondylodiskitis in a patient with carcinoma of sigmoid colon: a case report
Fungal spondylodiskitis is being increasingly reported in immunocompromised patients. A patient who presented with severe back pain three months following laparoscopic resection of Carcinoma of Sigmoid colon is presented here. Magnetic Resonance Imaging of the spine showed evidence of multilevel lumbar spondylodiskitis. Biopsy done via the posterior approach showed Candida tropicalis sensitive to fluconazole and resistant to Amphotericin B. Patient was treated with fluconazole and had good relief. Posterior pedicle screw stabilization was done to provide mechanical stability
Investigation on the Structural and Optical Properties of Thermally Evaporated Indium Selenide Compound Material for Solar Cell Application
In2Se3 thin films with different thicknesses have been deposited by thermal evaporation method on glass substrate under vacuum pressure of 10-6 Torr. Structural Properties of these films were studied by different analytical techniques. X- ray diffraction revealed as deposited films have amorphous nature and annealing effect enhanced crystalline structure. Structural studies by XRD results showed the polycrystalline nature of the films. The Full Width at Half Maximum (FWHM) values were observed from the XRD pattern and used to evaluate the microstructural parameters like crystallite size, strain, dislocation density. The optical absorption spectra of In2Se3 films were studied in the wavelength region of 250–2500 nm. The optical properties show that the band gap (Eg) values vary from 2.5 to 3.34 eV as an-nealing temperature varies from 150 to 350C.
When you are citing the document, use the following link http://essuir.sumdu.edu.ua/handle/123456789/3513
Managing Project Community in Infrastructure Megaprojects
Developing countries, such as India, look towards massive investments in infrastructure
megaprojects to achieve their development goals quickly. However, megaprojects are plagued with
failures and inefficiencies often due to the project’s inability to handle external stakeholders such
as project community. Project communities are the end users of the project, are most
inconvenienced by the project, and they hold significant potential to stop the project by asking a
democratically elected government to do so. In this context, we seek to understand how a metro
rail megaproject in India manages their project community through visible and invisible strategies
using an in-depth case study. The organizational power theories of the dimensions of power theory
and the circuit of power theory are used to explain these strategies. The research draws on data
from 30 semi-structured interviews with the project team and five years of social media data
comprising 640 Tweets. A Grounded theory method is used to find the visible, invisible strategies
and their relation between each other. The results show that invisible strategies depend on visible
strategies by relying on the adaptations made for the community and the visible strategies depend
on the invisible strategies by relying on the changed preferences of the project community. The
findings have contributions to theory and practice of managing project community in infrastructure
megaprojects
Assessment of variability and association for seed yield and yield attributing traits among the interspecific derivatives of greengram x blackgram cross
The present investigation was carried out with 24 progenies in F4 generation of interspecific cross derivatives of Vigna radiata cv. VBN(Gg)2 x Vigna mungo cv. Mash 114 to study the variability and association among the yield and the yield component traits. A set of 24 F4 progenies from the interspecific cross between greengram (VBN(Gg)2) and blackgram (Mash 114) formed the basic genetic material for the present investigation. Variability studies recorded high Phenotypic Coefficient of Variation (PCV) and Genotypic Coefficient of Variation (GCV) for the traits viz., number of branches/ plant, number of clusters/ plant, number of pods/ plant and seed yield /plant. High heritability (h2) along with high genetic advance as per cent of mean (GAM) were recorded for the traits, plant height, number of clusters/ plant, number of pods/ plant and seed yield/ plant. Association studies revealed that the trait number of pods/ plant alone recorded high direct positive effect on seed yield/ plant. The results indicated that high magnitude of variability was present among the interspecific progenies for these traits. The high heritability and genetic advance might be due to presence of additive gene action. Hence selection based on these traits might be effective for genetic improvement among the interspecific progenies of Vigna radiata x Vigna mungo. The study indicates that the trait, number of pods / plant should be given due importance in selection programme for seed yield improvement in the interspecific progenies of greengram and blackgram
Simple sequence repeat (SSR) markers for assessing genetic diversity among the parental lines of hybrid rice (Oryza sativa L.)
The present scientific study was carried out at Tamil Nadu Rice Research Institute, Aduthurai with the objective of studying the genetic divergence among 51 restorer and five maintainer lines in terms of grain quality and fertility restorer genes (Rf3, Rf4 and Rf7) using 55 primers of simple sequence repeat (SSR) markers. Among them, 37 SSR markers were found to be polymorphic and the number of amplified fragments ranged from one to five. The highest polymorphic information content (PIC) value (more than 0.60) was observed for eight primers viz., AB 443, RM 3, RM 29, RM 226, RM 228, RM 304, RM 1812 and RM 3873 and average PIC value was 0.444. Cluster analysis using NTSYS generated dendrogram divided all the 56 parental lines into two distinct groups viz., maintainer line (Group I) and restorer line (Group II) at 76% coefficient of similarity. Maintainer line group consisted of five genotypes (COMS 23B, COMS 24B, COMS 25B, CRMS 31B and CRMS 32B) and restorer line group had 51 genotypes. Further, at 80% similarity, all fifty one restorer lines were again grouped into nine clusters. With higher polymorphism revealed by SSR markers, parental lines having the similar genetic background from pedigree information were grouped into different clusters. The combination of pedigree analysis and SSR markers could be a more reliable method to study the diversity and grouping of parental lines of hybrid rice. Hybridization between diverse restorer and CMS groups identified from this study would be expected to yield hybrid combinations with premium grain quality and good fertility restoration.Keywords: Simple sequence repeat (SSR), maintainer and restorer genetic diversity, grain quality, fertility restorationAfrican Journal of Biotechnology Vol. 12(33), pp. 5105-5116
Computational Model Tracking Primary Electrons, Secondary Electrons, and Ions in the Discharge Chamber of an Ion Engine
Computational modeling of the plasma located in the discharge chamber of an ion engine is an important activity so that the development and design of the next generation of ion engines may be enhanced. In this work a computational tool called XOOPIC is used to model the primary electrons, secondary electrons, and ions inside the discharge chamber. The details of this computational tool are discussed in this paper. Preliminary results from XOOPIC are presented. The results presented include particle number density distributions for the primary electrons, the secondary electrons, and the ions. In addition the total number of a particular particle in the discharge chamber as a function of time, electric potential maps and magnetic field maps are presented. A primary electron number density plot from PRIMA is given in this paper so that the results of XOOPIC can be compared to it. PRIMA is a computer code that the present investigators have used in much of their previous work that provides results that compare well to experimental results. PRIMA only models the primary electrons in the discharge chamber. Modeling ions and secondary electrons, as well as the primary electrons, will greatly increase our ability to predict different characteristics of the plasma discharge used in an ion engine
- …