Corales tabulados del Devónico Inferior y del Carbonífero Inferior de las Cordilleras Costeras Catalanas (NE de España)

En este trabajo se describe una fauna inédita de corales tabulados de pequeño tamaño, conservada en forma de moldes naturales, procedente de materiales del Devónico Inferior (Gavà, provincia de Barcelona) y del Carbonífero Inferior (El Papiol y Cánoves, provincia de Barcelona) de las Cordilleras Costeras Catalanas. Las rocas paleozoicas de las Cordilleras Costeras Catalanas contienen fósiles pobremente conservados debido a que están intensamente deformadas y, a menudo, contienen intrusiones ígneas. La sucesión estratigráfica es conocida con detalle a partir de las dos últimas décadas (Julivert et al., 1986) y constituye una secuencia condensada, donde casi siempre faltan rocas del Devónico Medio y Superior

Non-linear dynamic analysis of RR signals in patients with and without excessive daytime sleepiness

Linear and non-linear measures applied to heart rate variability (HRV) can be used to quantify modulation of the sympathetic and parasympathetic branches of the autonomic nervous system. RR signals were obtained from the ECG recorded during five Maintenance of Wakefulness (MWT) and Multiple Sleep Latency (MSLT) tests alternated throughout the day from patients suffering sleep disturbance. Two different end-points were considered: Study A, excessive daytime sleepiness (EDS) versus without daytime sleepiness (WDS); Study B, Pre-CPAP versus Post-CP AP (continuous positive airway pressure therapy) in EDS. Measures obtained from spectral analysis (PSD), time-frequency representation (TFR), auto-correntropy (ACORR) and auto-mutual-information function (AMIF) were applied to describe autonomic nervous system activity and RR regularity. Statistical differences between EDS and WDS groups were found in MSLT events. During MSLT, the parasympathetic activity and RR regularity in EDS were affected by CPAP therapy. Non-linear measures obtained from EDS in Post-CPAP differed from Pre-CPAP (p-value<0.05) and tended to be similar to WDS.Peer ReviewedPostprint (published version

The CMS Event Builder

The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation. This paper describes studies of an EVB test-bench based on 64 PCs acting as data sources and data consumers and employing both Gigabit Ethernet and Myrinet technologies as the interconnect. In the case of Ethernet, protocols based on Layer-2 frames and on TCP/IP are evaluated. Results from ongoing studies, including measurements on throughput and scaling are presented. The architecture of the baseline CMS event builder will be outlined. The event builder is organised into two stages with intelligent buffers in between. The first stage contains 64 switches performing a first level of data concentration by building super-fragments from fragments of 8 data sources. The second stage combines the 64 super-fragments into full events. This architecture allows installation of the second stage of the event builder in steps, with the overall throughput scaling linearly with the number of switches in the second stage. Possible implementations of the components of the event builder are discussed and the expected performance of the full event builder is outlined.Comment: Conference CHEP0

Comparison between transfer path analysis methods on an electric vehicle

A comparison between transfer path analysis and operational path analysis methods using an electric vehicle is presented in this study. Structure-borne noise paths to the cabin from different engine and suspension points have been considered. To realise these methods, two types of test have been performed; operational tests on a rolling road and hammer tests in static conditions. The main aim of this work is assessing the critical paths which are transmitting the structure-borne vibrations from the electric vehicle?s vibration sources to the driver?s ear. This assessment includes the analysis of the noise contribution of each path depending on the frequency and vehicle speed range and moreover, the assessment of the path noise impact for harmonic orders which arise due to the physical components of the electric vehicle. Furthermore, the applicability of these methods to electric vehicles is assessed as these techniques have been extensively used for vehicles powered with internal combustion engines.The authors would like to acknowledge the COST ACTION TU1105 for supporting this research

Using XDAQ in Application Scenarios of the CMS Experiment

XDAQ is a generic data acquisition software environment that emerged from a rich set of of use-cases encountered in the CMS experiment. They cover not the deployment for multiple sub-detectors and the operation of different processing and networking equipment as well as a distributed collaboration of users with different needs. The use of the software in various application scenarios demonstrated the viability of the approach. We discuss two applications, the tracker local DAQ system for front-end commissioning and the muon chamber validation system. The description is completed by a brief overview of XDAQ.Comment: Conference CHEP 2003 (Computing in High Energy and Nuclear Physics, La Jolla, CA

Effects of diet type and supplementation of glucosamine, chondroitin, and MSM on body composition, functional status, and markers of health in women with knee osteoarthritis initiating a resistance-based exercise and weight loss program

Background: The purpose of this study was to determine whether sedentary obese women with knee OA initiating an exercise and weight loss program may experience more beneficial changes in body composition, functional capacity, and/or markers of health following a higher protein diet compared to a higher carbohydrate diet with or without GCM supplementation. Methods: Thirty sedentary women (54 ± 9 yrs, 163 ± 6 cm, 88.6 ± 13 kg, 46.1 ± 3% fat, 33.3 ± 5 kg/m2) with clinically diagnosed knee OA participated in a 14-week exercise and weight loss program. Participants followed an isoenergenic low fat higher carbohydrate (HC) or higher protein (HP) diet while participating in a supervised 30-minute circuit resistance-training program three times per week for 14-weeks. In a randomized and double blind manner, participants ingested supplements containing 1,500 mg/d of glucosamine (as d-glucosamine HCL), 1,200 mg/d of chondroitin sulfate (from chondroitin sulfate sodium), and 900 mg/d of methylsulfonylmethane or a placebo. At 0, 10, and 14-weeks, participants completed a battery of assessments. Data were analyzed by MANOVA with repeated measures. Results: Participants in both groups experienced significant reductions in body mass (-2.4 ± 3%), fat mass (-6.0 ± 6%), and body fat (-3.5 ± 4%) with no significant changes in fat free mass or resting energy expenditure. Perception of knee pain (-49 ± 39%) and knee stiffness (-42 ± 37%) was decreased while maximal strength (12%), muscular endurance (20%), balance indices (7% to 20%), lipid levels (-8% to -12%), homeostasis model assessment for estimating insulin resistance (-17%), leptin (-30%), and measures of physical functioning (59%), vitality (120%), and social function (66%) were improved in both groups with no differences among groups. Functional aerobic capacity was increased to a greater degree for those in the HP and GCM groups while there were some trends suggesting that supplementation affected perceptions of knee pain (p < 0.08). Conclusions: Circuit style resistance-training and weight loss improved functional capacity in women with knee OA. The type of diet and dietary supplementation of GCM provided marginal additive benefits. Trial Registration: ClinicalTrials.gov: NCT0127121

The 2 Tbps "Data to Surface" System of the CMS Data Acquisition

The Data Acquisition system of the CMS experiment, at the CERN LHC collider, is designed to build 1~MB events at a sustained rate of 100 kHz and to provide sufficient computing power to filter the events by a factor of 1000. The Data to Surface (D2S) system is the first layer of the Data Acquisition interfacing the underground subdetector readout electronics to the surface Event Builder. It collects the 100~GB/s input data from a large number of front-end cards (650) , implements a first stage event building by combining multiple sources into lar ger-size data fragments, and transports them to the surface for the full event building. The Data to Surface system can operate at the maximum rate of 2 Tbps. This paper describes the layout, reconfigurability and production validation of the D2S system which is to be installed by December 2005

Transverse Beam Envelope Measurements and the Limitations of the 3-Screen Emittance Method for Space-Charge Dominated Beams

In its normal mode of operation the Argonne Wakefield Accelerator Facility uses a high charge (10-100 nC), short pulse (3-5 psec) drive bunch to excite high-gradient accelerating fields in various slow-wave structures. To generate this bunch, we designed a 1.5 cell, L-band, rf photocathode gun with an emittance compensating solenoid to give optimal performance at high-charge; it has recently completed commissioning. More recently, we have begun to investigate the possibility of using this gun in a high-brightness, low-charge operating mode, with charge equal to approximately 1 nC, for high-precision measurements of wakefields. Two related measurements are reported on in this paper: (1) measurements of the transverse beam envelope are compared to predictions from the beam dynamics code PARMELA; and (2) investigations into the use of a modified 3-screen emittance measurement method that uses a beam envelope model that includes both space-charge and emittance effects. Both measurements were made for the 1 nC, 8 MeV beam in the drift region directly following the rf photocathode gun.Comment: 19 pages, 7 figure