7 research outputs found
The biocalcarenite stone of Agrigento (Italy): Preliminary investigations of compatible nanolime treatments
Nanolime is a promising consolidant for the conservation of most historic structures thanks to its high compatibility with carbonate-based substrates. Nanolime can recover the superficial cohesion of deteriorated surfaces thanks to its potential to complete the carbonation process, recreating a thin network of new cementing calcium carbonate. In this paper, the nanolime was produced by an innovative, time and energy-saving and scalable method, and its efficacy was tested preliminarily on biocalcarenite stones from Agrigento. The stones characterization as well as the treatment effectiveness, in terms of protection against water and superficial consolidation, was investigated by several techniques such as X-ray fluorescence, X-ray diffraction, scotch tape test, water absorption by capillarity, mercury intrusion porosimetry, drilling resistance measurement system and colorimeter. Investigations showed that nanolime could guarantee a complete transformation in pure calcite together with a superficial consolidation and a reduction in water absorption
New Sustainable, Scalable and One-Step Synthesis of Iron Oxide Nanoparticles by Ion Exchange Process
This work introduces an innovative, sustainable, and scalable synthesis of iron oxides nanoparticles (NPs) in aqueous suspension. The method, based on ion exchange process, consists of a one-step procedure, time and energy saving, operating in water and at room temperature, by cheap and renewable reagents. The influence of both oxidation state of the initial reagent and reaction atmosphere is considered. Three kinds of iron nanostructured compounds are obtained (2-lines ferrihydrite; layered-structure iron oxyhydroxide δ-FeOOH; and cubic magnetite), in turn used as precursors to obtain hematite and maghemite NPs. All the produced NPs are characterized by a high purity, small particles dimensions (from 2 to 50 nm), and high specific surface area values up to 420 m2/g, with yields of production >90%. In particular, among the most common iron oxide NPs, we obtained cubic magnetite NPs at room temperature, characterized by particle dimensions of about 6 nm and a surface area of 170 m2/g. We also obtained hematite NPs at very low temperature conditions (that is 2 h at 200 °C), characterized by particles dimensions of about 5 nm with a surface area value of 200 m2/g. The obtained results underline the strength of the synthetic method to provide a new, sustainable, tunable, and scalable high-quality production
Color Stability, Chemico-Physical and Optical Features of the Most Common PETG and PU Based Orthodontic Aligners for Clear Aligner Therapy
It is difficult to find research papers collecting comparative results about characterization studies of clear aligners. Therefore, the aim of this paper is to provide the first comparative analysis of most commercial clear aligners, in terms of their stability towards intra-oral staining agents, their physicochemical and optical properties, as well as their water absorption behavior. Five types of aligners, characterized by different techniques, are considered: Erkodur, Essix Plastic, Ghost Aligner, Zendura, and Invisalign. The obtained results show that clear aligners are made up of PETG, semi rigid PU, and a mixture of PU and PETG, with different degrees of crystallinity which affect the transparency of each aligner. In particular, the PETG-based materials reveal the highest value of short-range order and the highest properties in terms of transparency in the visible range. After 14 days of immersion into red wine and coffee, PETG and PU-based aligners reveal a perceivable change in color (NBS values from 1.5 to 3), corresponding to a loss of transparency due to the deposition of impurities on the surface. These results are particularly marked for Invisalign, showing changes towards other colors (NBS up to 35), probably due to the thermoforming process which led to the formation of a wrinkled surface entrapping the impurities
Sustainable Nanotechnologies for Curative and Preventive Wood Deacidification Treatments: An Eco-Friendly and Innovative Approach
International audienceWaterlogged wooden artifacts represent an important historical legacy of our past. They are very fragile, especially due to the severe phenomenon of acidification that may occur in the presence of acid precursors. To date, a satisfactory solution for the deacidification of ancient wood on a large scale has still not been found. In this paper, we propose, for the first time, eco-friendly curative and preventive treatments using nanoparticles (NPs) of earth alkaline hydroxides dispersed in water and produced on a large scale. We present the characterization of the NPs (by X-ray diffraction, atomic-force and electron microscopy, and small-angle neutron scattering), together with the study of the deacidification efficiency of our treatments. We demonstrate that all our treatments are very effective for both curative and preventive aims, able to assure an almost neutral or slightly alkaline pH of the treated woods. Furthermore, the use of water as a solvent paves the way for large-scale and eco-friendly applications which avoid substances that are harmful for the environment and for human health
Microanalytical investigations on a Byzantine fresco of the Dormitio Virginis from Sicily
New Materials and Technologies for Durability and Conservation of Building Heritage
The increase in concrete structures’ durability is a milestone to improve the sustainability of buildings and infrastructures. In order to ensure a prolonged service life, it is necessary to detect the deterioration of materials by means of monitoring systems aimed at evaluating not only the penetration of aggressive substances into concrete but also the corrosion of carbon-steel reinforcement. Therefore, proper data collection makes it possible to plan suitable restoration works which can be carried out with traditional or innovative techniques and materials. This work focuses on building heritage and it highlights the most recent findings for the conservation and restoration of reinforced concrete structures and masonry buildings
Poly[(μ4-phenylphosphonato)zinc(II)]
The title two-dimensional coordination polymer, [Zn(C6H5PO3)]n, was
synthesized serendipitously by reacting a tetraphosphonate cavitand
Tiiii[C3H7, CH3, C6H5] and Zn(CH3COO)22H2O in a DMF/H2O mixture. The
basic conditions of the reaction cleaved the phosphonate bridges at the upper
rim of the cavitand, making them available for reaction with the zinc ions. The
coordination polymer can be described as an inorganic layer in which zinc
coordinates the oxygen atoms of the phosphonate groups in a distorted
tetrahedral environment, while the phenyl groups, which are statistically
disordered over two orientations, point up and down with respect to the layer.
The layers interact through van der Waals interactions. The crystal studied was
refined as a two-component twin