545 research outputs found
Effect of Carburizing and Shot Peening on the Microstructure and Surface Properties of 17-CrNi6-Mo Steel
Carburizing and shot peening are commonly accepted surface treatment methods used to improve the surface properties of materials. Researchers are making attempts to optimize their application for obtaining superior mechanical properties. However, there are few comprehensive reports on this problem. The combination of carburizing and shot peening is used for the surface treatment of 17-CrNi6-Mo steel. This is followed by detailed analysis employing optical and scanning electron microscopy, microhardness testing, surface roughness measurements, and the measurement of residual stresses using X-ray diffraction. The results show that shot peening can further improve the microstructure and surface properties of carburized specimens since it induced the phase transformation of a carburized layer. Moreover, simulation of the phase composition variation curve along with the change in the carbon content and the continuous cooling transformation (CCT) curve of the specimen is also presented. The results are used to elucidate the carburizing effect on a 17-CrNi6-Mo steel surface microstructure.Цементация и дробеструйная обработка общепринятые методы поверхностной обработки, используемые для улучшения поверхностных свойств материалов. Ученые проводят работы в направлении оптимизации их применения с целью обеспечения высоких механических свойств. Однако существует лишь несколько подробных исследований, посвященных их применению. Комбинацию цементации и дробеструйной обработки используют для поверхностной обработки стали 17-CrNi6-Mo. После обработки проводили подробный анализ поверхности материала с использованием оптической и сканирующей электронной микроскопии, измерений ее микротвердости и шероховатости, а также остаточных напряжений с помощью рентгенографии. Результаты показывают, что дробеструйная обработка может дополнительно улучшить микроструктуру и поверхностные свойства науглероженных образцов, поскольку она вызывает фазовое превращение науглероженного слоя. Выполнено моделирование кривой вариации фазового состава с одновременным изменением содержания углерода, а также кривой превращения при непрерывном охлаждении образца. Полученные результаты используются для установления эффекта влияния цементации на микроструктуру поверхности стали 17-CrNi6-Mo
Effects of coarse-graining on the scaling behavior of long-range correlated and anti-correlated signals
We investigate how various coarse-graining methods affect the scaling
properties of long-range power-law correlated and anti-correlated signals,
quantified by the detrended fluctuation analysis. Specifically, for
coarse-graining in the magnitude of a signal, we consider (i) the Floor, (ii)
the Symmetry and (iii) the Centro-Symmetry coarse-graining methods. We find,
that for anti-correlated signals coarse-graining in the magnitude leads to a
crossover to random behavior at large scales, and that with increasing the
width of the coarse-graining partition interval this crossover moves
to intermediate and small scales. In contrast, the scaling of positively
correlated signals is less affected by the coarse-graining, with no observable
changes when a crossover appears at small
scales and moves to intermediate and large scales with increasing . For
very rough coarse-graining () based on the Floor and Symmetry
methods, the position of the crossover stabilizes, in contrast to the
Centro-Symmetry method where the crossover continuously moves across scales and
leads to a random behavior at all scales, thus indicating a much stronger
effect of the Centro-Symmetry compared to the Floor and the Symmetry methods.
For coarse-graining in time, where data points are averaged in non-overlapping
time windows, we find that the scaling for both anti-correlated and positively
correlated signals is practically preserved. The results of our simulations are
useful for the correct interpretation of the correlation and scaling properties
of symbolic sequences.Comment: 19 pages, 13 figure
Measurements of J/psi Decays into 2(pi+pi-)eta and 3(pi+pi-)eta
Based on a sample of 5.8X 10^7 J/psi events taken with the BESII detector,
the branching fractions of J/psi--> 2(pi+pi-)eta and J/psi-->3(pi+pi-)eta are
measured for the first time to be (2.26+-0.08+-0.27)X10^{-3} and
(7.24+-0.96+-1.11)X10^{-4}, respectively.Comment: 11 pages, 6 figure
BESII Detector Simulation
A Monte Carlo program based on Geant3 has been developed for BESII detector
simulation. The organization of the program is outlined, and the digitization
procedure for simulating the response of various sub-detectors is described.
Comparisons with data show that the performance of the program is generally
satisfactory.Comment: 17 pages, 14 figures, uses elsart.cls, to be submitted to NIM
Measurement of branching fractions for the inclusive Cabibbo-favored ~K*0(892) and Cabibbo-suppressed K*0(892) decays of neutral and charged D mesons
The branching fractions for the inclusive Cabibbo-favored ~K*0 and
Cabibbo-suppressed K*0 decays of D mesons are measured based on a data sample
of 33 pb-1 collected at and around the center-of-mass energy of 3.773 GeV with
the BES-II detector at the BEPC collider. The branching fractions for the
decays D+(0) -> ~K*0(892)X and D0 -> K*0(892)X are determined to be BF(D0 ->
\~K*0X) = (8.7 +/- 4.0 +/- 1.2)%, BF(D+ -> ~K*0X) = (23.2 +/- 4.5 +/- 3.0)% and
BF(D0 -> K*0X) = (2.8 +/- 1.2 +/- 0.4)%. An upper limit on the branching
fraction at 90% C.L. for the decay D+ -> K*0(892)X is set to be BF(D+ -> K*0X)
< 6.6%
Study of
New data are presented on from a sample of 58M
events in the upgraded BES II detector at the BEPC. There is a
conspicuous signal for and a peak at higher mass which
may be fitted with . From a combined analysis with
data, the branching ratio
is at the 95%
confidence level.Comment: 11 pages, 5 figures. Submitted to Phys. Lett.
Search for the Rare Decays J/Psi --> Ds- e+ nu_e, J/Psi --> D- e+ nu_e, and J/Psi --> D0bar e+ e-
We report on a search for the decays J/Psi --> Ds- e+ nu_e + c.c., J/Psi -->
D- e+ nu_e + c.c., and J/Psi --> D0bar e+ e- + c.c. in a sample of 5.8 * 10^7
J/Psi events collected with the BESII detector at the BEPC. No excess of signal
above background is observed, and 90% confidence level upper limits on the
branching fractions are set: B(J/Psi --> Ds- e+ nu_e + c.c.)<4.8*10^-5, B(J/Psi
--> D- e+ nu_e + c.c.) D0bar e+ e- + c.c.)<1.1*10^-5Comment: 10 pages, 4 figure
Measurements of Cabibbo Suppressed Hadronic Decay Fractions of Charmed D0 and D+ Mesons
Using data collected with the BESII detector at storage ring
Beijing Electron Positron Collider, the measurements of relative branching
fractions for seven Cabibbo suppressed hadronic weak decays ,
, and , , and are presented.Comment: 11 pages, 5 figure
- …