Hydrogen sensors based on electrophoretically deposited Pd nanoparticles onto InP

Electrophoretic deposition of palladium nanoparticles prepared by the reverse micelle technique onto InP substrates is addressed. We demonstrate that the substrate pre-deposition treatment and the deposition conditions can extensively influence the morphology of the deposited palladium nanoparticle films. Schottky diodes based on these films show notably high values of the barrier height and of the rectification ratio giving evidence of a small degree of the Fermi level pinning. Moreover, electrical characteristics of these diodes are exceptionally sensitive to the exposure to gas mixtures with small hydrogen content

Thermoplastic Composites reinforced with Multi-layer Woven Jute Fabric: A Comparative Analysis

Three commonly available thermoplastic matrices - High-density polyethylene (HDPE), polypropylene (PP) and nylon 6 – are reinforced with hessian jute fabric in multi-layer sequence to prepare composite laminates by compression moulding technique. The composite had a nominal fibre content of 18% in terms of weight and a nominal thickness of 6.5 mm. The mechanical and fracture behaviours of the resultant laminates are tested and compared. It was found that the Nylon-Jute composite exhibited the highest values of tensile strength, Young’s modulus, flexural strength, flexural modulus and hardness. On the other hand, HDPE-Jute composite showed relatively poor performance. Interestingly, the HDPE-Jute composite exhibited the highest impact strength and the Nylon-Jute composite was the poorest in this regard. The amount of water absorption by the composites from highest to the lowest was found in the following order: Nylon-Jute > HDPE-Jute > PP-Jute

Drug-prescribing patterns during pregnancy in the tertiary care hospitals of Pakistan: a cross sectional study

<p>Abstract</p> <p>Background</p> <p>The rationale for use of drugs during pregnancy requires a careful assessment as in addition to the mother, the health and life of her unborn child is also at stake. Information on the use of drugs during pregnancy is not available in Pakistan. The aim of this study was to evaluate the patterns of drug prescriptions to pregnant women in tertiary care hospitals of Pakistan.</p> <p>Methods</p> <p>This was a cross-sectional study conducted at five tertiary care hospitals of Pakistan. Copies of outpatient medicinal prescriptions given to pregnant patients attending the antenatal clinics were collected. The drugs were classified according to the pharmacological class and their teratogenic potential.</p> <p>Results</p> <p>All the pregnant women attending the antenatal clinics received a prescription containing at least one drug. A total of 3769 distinct prescriptions given to different women were collected. Majority of the women who received the prescriptions belonged to third trimester (55.4%) followed by second (33.6%) and first trimester (11.0%). On an average, each prescription contained 1.66 ± 0.14 drugs. The obstetricians at Civil Hospital, Karachi and Chandka Medical College Hospital, Larkana showed a tendency of prescribing lesser number of drugs compared to those in other hospitals. Anti-anemic drugs including iron preparations and vitamin and mineral supplements (79.4%) were the most frequently prescribed drugs followed by analgesics (6.2%) and anti-bacterials (2.2%). 739 women (19.6%) received prescriptions containing drugs other than vitamin or mineral supplements. Only 1275 (21.6%) of all the prescribed drugs (n = 6100) were outside this vitamin/mineral supplement class. Out of these 1275 drugs, 29 (2.3%) drugs were prescribed which are considered to be teratogenic. Misoprostol was the most frequently prescribed (n = 6) among the teratogenic drugs followed by carbimazole (n = 5) and methotrexate (n = 5). Twenty nine pregnant women (0.8% of all the women studied) were prescribed these teratogenic drugs.</p> <p>Conclusion</p> <p>Less than one percent of the pregnant women attending tertiary care hospitals in Pakistan are prescribed teratogenic drugs. The prescribing practices of Pakistani physicians are similar to those in western countries.</p

Robotic assisted Laparoscopic partial Nephrectomy for suspected Renal Cell Carcinoma: Retrospective review of surgical outcomes of 35 Cases

This is an Open Access article distributed under the terms of the Creative Commons Attribution Licens

Pathogen- and Host-Directed Antileishmanial Effects Mediated by Polyhexanide (PHMB)

BACKGROUND:Cutaneous leishmaniasis (CL) is a neglected tropical disease caused by protozoan parasites of the genus Leishmania. CL causes enormous suffering in many countries worldwide. There is no licensed vaccine against CL, and the chemotherapy options show limited efficacy and high toxicity. Localization of the parasites inside host cells is a barrier to most standard chemo- and immune-based interventions. Hence, novel drugs, which are safe, effective and readily accessible to third-world countries and/or drug delivery technologies for effective CL treatments are desperately needed. METHODOLOGY/PRINCIPAL FINDINGS:Here we evaluated the antileishmanial properties and delivery potential of polyhexamethylene biguanide (PHMB; polyhexanide), a widely used antimicrobial and wound antiseptic, in the Leishmania model. PHMB showed an inherent antileishmanial activity at submicromolar concentrations. Our data revealed that PHMB kills Leishmania major (L. major) via a dual mechanism involving disruption of membrane integrity and selective chromosome condensation and damage. PHMB's DNA binding and host cell entry properties were further exploited to improve the delivery and immunomodulatory activities of unmethylated cytosine-phosphate-guanine oligodeoxynucleotides (CpG ODN). PHMB spontaneously bound CpG ODN, forming stable nanopolyplexes that enhanced uptake of CpG ODN, potentiated antimicrobial killing and reduced host cell toxicity of PHMB. CONCLUSIONS:Given its low cost and long history of safe topical use, PHMB holds promise as a drug for CL therapy and delivery vehicle for nucleic acid immunomodulators

A Model for How Signal Duration Can Determine Distinct Outcomes of Gene Transcription Programs

The reason why IL-6 induces a pro-inflammatory response, while IL-10 induces an anti-inflammatory response, despite both cytokines activating the same transcription factor, STAT3, is not well understood. It is known that IL-6 induces a transient STAT3 signal and that IL-10 induces a sustained STAT3 signal due to the STAT3-induced inhibitor SOCS3's ability to bind to the IL-6R and not the IL-10R. We sought to develop a general transcriptional network that is capable of translating sustained signals into one response, while translating transient signals into a second response. The general structure of such a network is that the transcription factor STAT3 can induce both an inflammatory response and an anti-inflammatory response by inducing two different genes. The anti-inflammatory gene can bind to and inhibit the inflammatory gene's production and the inflammatory gene can bind to its own promoter and induce its own transcription in the absence of the signal. One prediction that can be made from such a network is that in SOCS3−/− mice, where IL-6 induces a sustained STAT3 signal, that IL-6 would act as an anti-inflammatory cytokine, which has indeed been observed experimentally in the literature

Electro-plating and characterisation of cadmium sulphide thin films using ammonium thiosulphate as the sulphur source

Cadmium sulphide (CdS) thin films have been successfully prepared from an aqueous electrolyte bath containing CdCl2 and ammonium thiosulphate ((NH4)2S2O3) using electrodeposition technique. The structural, compositional, optical, morphological and electrical properties of these thin films have been characterized using X-ray diffraction (XRD), Raman spectroscopy, energy dispersive X-ray spectroscopy, UV–Vis spectrophotometry, scanning electron microscopy (SEM), atomic force microscopy (AFM), photoelectrochemical cell and D.C. current–voltage (I–V) measurements. The optimum deposition cathodic potential has been observed at 1,455 mV, in a 2-electrode system with respect to carbon anode. Structural analysis using XRD shows a mixture of hexagonal and cubic phases in the as-deposited CdS samples and a phase transformation to the hexagonal structure occurred after heat treatment at 400 °C for 20 min. Optical studies demonstrate an improvement in the band edge, producing 2.42 eV for the band gap of the films after heat treatment. The heat treated CdS thin films show better transmission for wavelengths longer than 500 nm. SEM and AFM show that the heat-treated samples are more uniform, smoother and have larger grain size. Electrical studies confirm that the CdS thin films have n-type electrical conductivity and heat treated CdS thin films have resistivities of the order of 105 Ω cm

Genetic variation of wild and hatchery populations of the catla Indian major carp (Catla catla Hamilton 1822: Cypriniformes, Cyprinidae) revealed by RAPD markers

Genetic variation is a key component for improving a stock through selective breeding programs. Randomly amplified polymorphic DNA (RAPD) markers were used to assess genetic variation in three wild population of the catla carp (Catla catla Hamilton 1822) in the Halda, Jamuna and Padma rivers and one hatchery population in Bangladesh. Five decamer random primers were used to amplify RAPD markers from 30 fish from each population. Thirty of the 55 scorable bands were polymorphic, indicating some degree of genetic variation in all the populations. The proportion of polymorphic loci and gene diversity values reflected a relatively higher level of genetic variation in the Halda population. Sixteen of the 30 polymorphic loci showed a significant (p < 0.05, p < 0.01, p < 0.001) departure from homogeneity and the FST values in the different populations indicated some degree of genetic differentiation in the population pairs. Estimated genetic distances between populations were directly correlated with geographical distances. The unweighted pair group method with averages (UPGMA) dendrogram showed two clusters, the Halda population forming one cluster and the other populations the second cluster. Genetic variation of C. catla is a useful trait for developing a good management strategy for maintaining genetic quality of the species