2,549 research outputs found
Event-related potential correlates of spatiotemporal regularities in vision
Spatiotemporal regularities in stimulus structure have been shown to influence visual target detection and discrimination. Here we investigate whether the influence of spatiotemporal regularity is associated with the modulation of early components (P1/N1) in Event-Related Potentials (ERP). Stimuli consisted of five horizontal bars (predictors) appearing successively towards the fovea followed by a target bar at fixation, and participants performed a key-press on target detection. Results showed that compared to the condition where five predictors were presented in a temporally regular but spatially randomised order, target detection-times were faster and contralateral N1 peak latencies were shorter when the predictors and the target were presented with spatial and temporal regularity. Both measures were most prolonged when only the target was presented. In this latter condition, an additional latency prolongation was observed for the P1 peak compared to the conditions where the target was preceded by the predictors. The latency shifts associated with early ERP components provides additional support for involvement of early visual processing stages in the coding of spatiotemporal regularities in humans
Pumping current of a Luttinger liquid with finite length
We study transport properties in a Tomonaga-Luttinger liquid in the presence
of two time-dependent point like weak impurities, taking into account
finite-length effects. By employing analytical methods and performing a
perturbation theory, we compute the backscattering pumping current (I_bs) in
different regimes which can be established in relation to the oscillatory
frequency of the impurities and to the frequency related to the length and the
renormalized velocity (by the electron-electron interactions) of the charge
density modes. We investigate the role played by the spatial position of the
impurity potentials. We also show how the previous infinite length results for
I_bs are modified by the finite size of the system.Comment: 9 pages, 7 figure
Effekten av olika koncentrationer av Rotstop R och Rotstop S och ofullständig täckning av Rotstop S på sporinfektioner av rotticka på granstubbar
The effectiveness of treatment with two Phlebiopsis gigantea based preparations (Rotstop®
and RotstopS) in different concentrations against the root and butt rot causing fungus
Heterobasidion annosum s.l. on Norway spruce (Picea abies) thinning stumps in southern
Sweden was compared. The trees were cut on three sites during the summer 2004 and 285
stumps were treated manually with 100% cover with two different amounts of spores in
solution corresponding to approximately 5×106 spores/l and 10×106 spores/l. 31 stumps
received mechanical part cover with the highest spore concentrations of Phlebiopsis gigantea, i.e. approximately 20×106 spores/l. Mechanical treatment was assessed for satisfactory treatment effect. Three months later, samples were collected and analyzed.
There was a significant reduction in frequency and relative areas of Heterobasidion spp.
infections on stumps with manual application of control agents compared to untreated stumps. On average 10 to 23% of stumps subjected to manual treatments were infected compared to 52% for the untreated stumps. However, none of the concentration solutions of Rotstop® and RotstopS differed from the others in reduction of Heterobasidion spp. infections. Mechanical treatment failed to control the Heterobasidion spp. infections, but there was a tendency for the 85.1-95.0% cover class to provide better result than the others. Thus, despite of the incomplete control of the pathogen, stump treatment with different concentrations of Phlebiopsis gigantea oidia in suspensions provided equal effects at the present spore loads of Heterobasidion spp.Effektiviteten av behandling med två pergamentsvampsbaserade (Phlebiopsis gigantea)
lösningar (Rotstop® och RotstopS) i olika koncentrationer mot sporinfektioner av rotticka
(Heterobasidion spp.) på gallringsstubbar av gran (Picea abies) i södra Sverige jämfördes.
Träd avverkades på tre olika lokaler under sommaren 2004 och sammanlagt 285 stubbar
behandlades manuellt med en hundraprocentig täckning i två olika koncentrationer
motsvarande ungefär 5×106 sporer/l respektive 10×106 sporer/l lösning. 31 stubbar på en av
lokalerna behandlades maskinellt med en ofullständig täckning men med den högsta
koncentrationen av pergamentsvamp (RotstopS), ca 20×106 sporer/l lösning. Effekten av den
mekaniska behandlingens partiella täckning jämfördes med den manuella fullständiga. Tre
månader efter behandlingen samlades prover in för analys med avseende på förekomsten av
rotticka.
Alla manuella behandlingar gav en signifikant reducering av frekvensen av och relativa arean
av rottickeinfektioner jämfört med obehandlade stubbar. I genomsnitt var 10 till 23 % av de
manuellt behandlade stubbarna infekterade jämfört med 52 % av de obehandlade. Ingen av de
manuella applikationerna skiljde sig dock från varandra. Den mekaniska behandlingen gav
inte ett tillfredsställande resultat men det fanns en tendens till att täckningsgradsklass 85,1-
95,0 % fungerade bättre än de andra. Således, trots att ingen behandling gav en 100 % -ig
minskning av antalet rottickeinfektioner, verkar olika koncentrationer av Rotstop® och
RotstopS ge ett likvärdigt resultat under de förhållanden i sportryck som rådde vid
behandlingen
Mechanically induced current and quantum evaporation from Luttinger liquids
We investigate transport through a tunnelling junction between an
uncorrelated metallic lead and a Luttinger liquid when the latter is subjected
to a time dependent perturbation. The tunnelling current as well as the
electron energy distribution function are found to be strongly affected by the
perturbation due to generation of harmonics in the density oscillations. Using
a semiconducting lead instead of a metallic one results in electrons being
injected into the lead even without applied voltage. Some applications to
carbon nanotubes are discussed.Comment: 7 pages, 2 figures (eps files
Recommended from our members
Non-paraxial Split-step Finite-difference Method for Beam Propagation
A method based on symmetrized splitting of the propagation operator in the finite difference scheme for non-paraxial beam propagation is presented. The formulation allows the solution of the second order scalar wave equation without having to make the slowly varying envelope and one-way propagation approximations. The method is highly accurate and numerically efficient. Unlike most Padé approximant based methods, it is non-iterative in nature and requires less computation. The method can be used for bi-directional propagation as well
Educating Health Professionals about Disability: A Review of Interventions
Health professionals need to understand the human rights and health needs of disabled people. This review of evidence on interventions demonstrates that a range of often innovative approaches have been trialled. Lectures by faculty are less effective in changing attitudes than contact with disabled people themselves. Existing examples of good practice need to be scaled up, and better and more long-term evaluations of impact are required
A new approach to social behavior simulation: the mask model
This paper proposes a new perspective, based on the concept of social masks, for the simulation of a realistic NPC (Non-Player Character) behavior. The Mask Model goal is to support AI techniques for autonomous agents by encouraging or discouraging behaviors according to the social environment and by providing knowledge about possible reactions to the agent actions. In this approach, the NPC tendencies are controlled by the interactions of three overlapping mask layers: self- perception layer, social layer and interpersonal layer. The masks mould the tendencies, the feelings and the ethics of a NPC. By changing the links between characters and masks, a wide variety of different behaviors and story-lines may arise. The paper present an algorithm for the selection of the actions and an example implementation
Zinc and Iron Nutrition to Increase the Productivity of Pearl Millet-Mustard Cropping System in Salt Affected Soils
The abiotic stresses, such as soil salinity and sodicity are largely responsible for the low productivity of crops mainly due to low availability of micro-nutrients especially as zinc (Zn) and iron (Fe). Therefore, judicious management of plant nutrients in these soils is as important as their reclamation. A field experiment was conducted for 4 consecutive years, consisting of 12 treatments laid out in randomized block design to evaluate the effect of rate and methods of zinc and iron as single or combined soil as well as foliar application in pearl millet-mustard cropping system grown on salt affected soils. Soil application of Zn and Fe were applied at the time of sowing with FYM or without FYM (addition of FYM done only in pearl millet) and foliar application of respective nutrients were also applied at 30 and 45 days after sowing of crops. The results of experiment showed that, application of FYM 10 t ha-1 along with 5 kg Zn+10 kg Fe significantly (p=0.05) improved the yield parameters of pearl millet and mustard followed by 5 kg ha-1 Zn and 10 kg ha-1 Fe as soil application. The results also indicated that combined soil application of 5 kg Zn+10 kg Fe +10 t FYM increased the pearl millet grain yield (36.6 q ha-1) and mustard seed yield (22.7 q ha-1) by 57.1% and 42.8% higher over control, however, yield improvement was 35.6 and 20.7 % due to application of 5 kg Zn+10 kg Fe without FYM, respectively, in pearl millet and mustard over control. Ferrous-iron content in both crops proved to be a better index of Fe nutrition status compared to total plant Fe and DTPA- extractable soil Fe under salt affected soils. Salt affected soils are having vast potential to produce a significant amount of food grain by applying optimum dose of Zn, Fe and FYM in pearl millet and mustard. Combined foliar application of Zn and Fe also increased the yields of pearl millet and mustard grown in saline soils. Ferrous iron (Fe2+) is better indicator for iron nutrition in crops
Recommended from our members
Field Demonstrations of Logging Technologies for Reservoir Characterization
Commercial products from bio-active extractives in cypress milling residues.
Extractive components obtained from milling residues of white cypress were studied for chemical identity and bioactivity with a view to developing a commercial use for these components, thus increasing the value of the residues and improving the economics of cypress sawn wood production. Extracts obtained by solvent or steam extraction techniques from cypress sawdust were each fractionated by a range of techniques into groups of similar compounds. Crude extracts and fractions were screened against a range of agricultural pests and diseases, including two fungi, subterranean termites, fruit spotting bugs, two-spotted mites, thrips, heliothis, banana scab moths, silverleaf whiteflies, cattle tick adults and larvae, and ruminant gastrointestinal nematodes. Additional screening was undertaken where encouraging results were achieved, for two-spotted mites, thrips, silverleaf whiteflies, cattle tick adults and ruminant gastrointestinal nematodes.
After considering degrees of efficacy against, and economic importance of, the agricultural pests, and likely production costs of extracts and fractions, the crude extract (oil) produced by steam distillation was chosen for further study against silverleaf whitefly. A useful degree of control was achievable when this oil was applied to tomato or eggplant at 0.1%, with much less harmful effects on a beneficial insect. Activity of the oil against silverleaf whitefly was undiminished 3.5 years after it was generated. There was little benefit from supplementing the extract with co-formulated paraffinic oil. From the steam distilled oil, fifty-five compounds were characterised, thirty-five compounds representing 92.478 % of the oil, with guaiol (20.8%) and citronellic acid (15.9%) most abundant. These two compounds, and a group of oxygenated compounds containing bulnesol and a range of eudesmols, were found to account for most of the activity against silverleaf whitefly. This application was recommended for first progression to commercialisation
- …