Stochastic modelling and updating of a joint contact interface

Dynamic properties of the contact interfaces in joints and mechanical connections have a great influence on the overall dynamic properties of assembled structures. Uncertainty and nonlinearity are two major effects of contact interfaces which introduce challenges in accurate modeling. Randomness in surface roughness quality, surface finish and contact preload are the main sources of variability in the contact interfaces. On the other side, slip and slap are two mechanisms responsible for nonlinear behavior of joints. Stochastic linear/nonlinear models need to be developed for such uncertain structures to be used in dynamic response analysis or system parameter identification. In this paper, variability in linear behavior of an assembled structure containing a bolted lap-joint is investigated by using experimental results. A stochastic model is then constructed for the structure by employing a stochastic generic joint model and the uncertainty in the joint model parameters is identified by using a Bayesian identification approach

Poultry and Beef Meat as Potential Seedbeds for Antimicrobial Resistant Enterotoxigenic Bacillus Species: A Materializing Epidemiological and Potential Severe Health Hazard

Although Bacillus cereus is of particular concern in food safety and public health, the role of other Bacillus species was overlooked. Therefore, we investigated the presence of eight enterotoxigenic genes, a hemolytic gene and phenotypic antibiotic resistance profiles of Bacillusspecies in retail meat samples. From 255 samples, 124 Bacillus isolates were recovered, 27 belonged to B. cereusand 97 were non-B. cereus species. Interestingly, the non-B. cereus isolates carried the virulence genes and exhibited phenotypic virulence characteristics as the B. cereus. However, correlation matrix analysis revealed the B. cereus group positively correlates with the presence of the genes hblA, hblC, and plc, and the detection of hemolysis (p \u3c 0.05), while the other Bacillus sp. groups are negatively correlated. Tests for antimicrobial resistance against ten antibiotics revealed extensive drug and multi-drug resistant isolates. Statistical analyses didn’t support a correlation of antibiotic resistance to tested virulence factors suggesting independence of these phenotypic markers and virulence genes. Of special interest was the isolation of Paenibacillus alvei and Geobacillus stearothermophilus from the imported meat samples being the first recorded. The isolation of non-B. cereus species carrying enterotoxigenic genes in meat within Egypt, suggests their impact on food safety and public health and should therefore not be minimised, posing an area that requires further research

Polymorphism of growth hormone gene and its association with wool traits in Egyptian sheep breeds

Growth hormone (GH) gene has been described as a candidate gene for marker-assisted selection in different farm animals. The present study was designed to identify the polymorphism in GH gene and its association with variation of wool traits in Egyptian sheep breeds. Wool and blood samples were collected from 42 animals including two breeds (Barki and Rahmani) and one crossbred (Rahmani x Awase). Measurements of wool traits were analyzed and involved staple strength (Str), staple length (STL), fiber diameter (FD) and clean fleece yield (CFW). DNA was extracted from blood samples and a 365-bp fragment from exon V was amplified by polymerase chain reaction (PCR). Single strand conformation polymorphisim (SSCP) analysis showed two conformational patterns. The pattern I was recorded to be more frequent (83.3, 92.86 and 90%) than pattern II (16.7, 7.14 and 10%) in Barki, Rahmani and crossbred, respectively. The sequence analysis showed one single nucleotide polymorphism (C/T). The pattern I (allele T) has been found to affect CFW and FD than pattern II (allele C). Whereas, C allele was more pronounced for Str and STL. These traits are the most important parameters determining commercial values of wool that are preferred for clothing or carpets industry. The nucleotide sequences of C and T alleles were submitted to GenBank and have the accession numbers: KT250511 and KT250512, respectively. In conclusion, the present results provide evidence that there is a single nucleotide polymorphism within GH gene in Egyptian sheep breeds. This mutation was found to have some effects on wool traits. Therefore our data show interesting prospects in future selection programs for improving wool industry.Key words: Sheep, wool, growth hormone (GH) gene, polymorphism, single strand conformation polymorphism (SSCP)

An equivalent model of a nonlinear bolted flange joint

The dynamic response of individual components in an assembled structure shows high accuracy compared to experimental measurements of the system response. However, when it comes to assemblies, the conventional linear approaches fail to deliver good accuracy, due to the uncertain linear and nonlinear mechanisms in the contact interface of the joints. Therefore, the inherent dynamics of the contact interfaces needs to be considered in modeling assembled structures. In this paper the prediction of the nonlinear dynamic response in a bolted flange joint was obtained in two ways. First, a 3D detailed finite element model capable of representing the micro-slip mechanism was made using a quasi-static time stepping analysis. The linear characteristics and nonlinear mechanisms developing in the contact interface of a bolted joint are investigated by using the 3D detailed model. Moreover, the natural frequencies of the assembled structure (representing the linear response) and the micro-slip behavior in terms of hysteresis loops (representing the nonlinear response) are obtained using the detailed model. Second, an equivalent model composed of beam elements and an appropriate joint model is then constructed for the assembled structure. An identification approach is proposed, and the parameters of the joint model are identified using both linear and nonlinear characteristics, i.e. natural frequencies and hysteresis loops. Comparing the hysteresis loops obtained from the detailed and equivalent models verifies the accuracy of the joint model used to represent the contact interface and the identification approach proposed for parameter quantification

The relationship among avian influenza, gut microbiota and chicken immunity: An updated overview

The alimentary tract in chickens plays a crucial role in immune cell formation and immune challenges, which regulate intestinal flora and sustain extra-intestinal immunity. The interaction between pathogenic microorganisms and the host commensal microbiota as well as the variety and integrity of gut microbiota play a vital role in health and disease conditions. Thus, several studies have highlighted the importance of gut microbiota in developing immunity against viral infections in chickens. The gut microbiota (such as different species of Lactobacillus, Blautia Bifidobacterium, Faecalibacterium, Clostridium XlVa, and members of firmicutes) encounters different pathogens through different mechanisms. The digestive tract is a highly reactive environment, and infectious microorganisms can disturb its homeostasis, resulting in dysbiosis and mucosal infections. Avian influenza viruses (AIV) are highly infectious zoonotic viruses that lead to severe economic losses and pose a threat to the poultry industry worldwide. AIV is a challenging virus that affects gut integrity, disrupts microbial homeostasis and induces inflammatory damage in the intestinal mucosa. H9N2 AIV infection elevates the expression of proinflammatory cytokines, such as interferon (IFN-γ and IFNα) and interleukins (IL-17A and IL-22), and increases the proliferation of members of proteobacteria, particularly Escherichia coli. On the contrary, it decreases the proliferation of certain beneficial bacteria, such as Enterococcus, Lactobacillus and other probiotic microorganisms. In addition, H9N2 AIV decreases the expression of primary gel-forming mucin, endogenous trefoil factor family peptides and tight junction proteins (ZO-1, claudin 3, and occludin), resulting in severe intestinal damage. This review highlights the relationship among AIV, gut microbiota and immunity in chicken

Worldwide evaluations of quinoa: preliminary results from post International Year of Quinoa FAO projects in nine countries

Chenopodium quinoa Willd, a high quality grain crop, is resistant to abiotic stresses (drought, cold, and salt) and offers an optimal source of protein. Quinoa represents a symbol of crop genetic diversity across the Andean region. In recent years, this crop has undergone a major expansion outside its countries of origin. The activities carried out within the framework of the International Year of Quinoa provided a great contribution to raise awareness on the multiple benefits of quinoa as well as to its wider cultivation at the global level. FAO is actively involved in promoting and evaluating the cultivation of quinoa in 26 countries outside the Andean region with the aim to strengthen food and nutrition security. The main goal of this research is to evaluate the adaptability of selected quinoa genotypes under different environments outside the Andean region. This paper presents the preliminary results from nine countries. Field evaluations were conducted during 2013/2014 and 2014/2015 in Asia (Kyrgyzstan and Tajikistan), and the Near East and North African countries (Algeria, Egypt, Iraq, Iran, Lebanon, Mauritania, and Yemen). In each country, the trials were carried out in different locations that globally represent the diversity of 19 agrarian systems under different agro-ecological conditions. Twenty-one genotypes of quinoa were tested using the same experimental protocol in all locations consisting in a randomized complete block design (RCBD) with three replicates. Some genotypes showed higher yields and the Q18 and Q12 landraces displayed greater adaptation than others to new environmental conditions. The Q21 and Q26 landraces were evaluated with stable and satisfactory levels of yield (>1 t.ha−1) in each of the different trial sites. This production stability is of considerable importance especially under climate change uncertainty. While these results suggest that this Andean crop is able to grow in many different environments, social, and cultural considerations remain crucial regarding its possible introduction as a staple food in new cropping systems around the world

Integration of transcriptome and metabolome provides unique insights to pathways associated with obese breast cancer patients

Information regarding transcriptome and metabolome has significantly contributed to identifying potential therapeutic targets for the management of a variety of cancers. Obesity has profound effects on both cancer cell transcriptome and metabolome that can affect the outcome of cancer therapy. The information regarding the potential effects of obesity on breast cancer (BC) transcriptome, metabolome, and its integration to identify novel pathways related to disease progression are still elusive. We assessed the whole blood transcriptome and serum metabolome, as circulating metabolites, of obese BC patients compared them with non-obese BC patients. In these patients' samples, 186 significant differentially expressed genes (DEGs) were identified, comprising 156 upregulated and 30 downregulated. The expressions of these gene were confirmed by qRT-PCR. Furthermore, 96 deregulated metabolites were identified as untargeted metabolomics in the same group of patients. These detected DEGs and deregulated metabolites enriched in many cellular pathways. Further investigation, by integration analysis between transcriptomics and metabolomics data at the pathway levels, revealed seven unique enriched pathways in obese BC patients when compared with non-obese BC patients, which may provide resistance for BC cells to dodge the circulating immune cells in the blood. In conclusion, this study provides information on the unique pathways altered at transcriptome and metabolome levels in obese BC patients that could provide an important tool for researchers and contribute further to knowledge on the molecular interaction between obesity and BC. Further studies are needed to confirm this and to elucidate the exact underlying mechanism for the effects of obesity on the BC initiation or/and progression

A Green's function approach to transmission of massless Dirac fermions in graphene through an array of random scatterers

We consider the transmission of massless Dirac fermions through an array of short range scatterers which are modeled as randomly positioned $\delta$- function like potentials along the x-axis. We particularly discuss the interplay between disorder-induced localization that is the hallmark of a non-relativistic system and two important properties of such massless Dirac fermions, namely, complete transmission at normal incidence and periodic dependence of transmission coefficient on the strength of the barrier that leads to a periodic resonant transmission. This leads to two different types of conductance behavior as a function of the system size at the resonant and the off-resonance strengths of the delta function potential. We explain this behavior of the conductance in terms of the transmission through a pair of such barriers using a Green's function based approach. The method helps to understand such disordered transport in terms of well known optical phenomena such as Fabry Perot resonances.Comment: 22 double spaced single column pages. 15 .eps figure

Energy and electricity consumption analysis of Malaysian industrial sector

Malaysia has been experiencing strong economic growth through the last decade. Energy has been a key input in the development and growth of the country. The industrial sector is the second largest consumers of energy in Malaysia. In the present work sixty-four (64) factories in seven different manufacturing sectors were audited within the four regions of east-coast of Malaysia. In this audit, the most important parameters that have been collected are; power rating and operation time of energy consuming equipment/machinery; fossil fuel and other sources of energy consumption; production figure; peak and off peak tariff usage behavior; and power factor. These data were analyzed to investigate the breakdown of end-use equipment/machinery, the peak and off peak usage behavior, power factor trend, specific energy consumption and specific electricity consumption. The result of the energy audit shows that the highest energy consuming equipment is electric motor followed by liquid pumps and air compressor. The highest specific total energy (fossil fuel and electricity) consumption among the industrial sub-sectors is found in the rubber producing industries followed by fabricated metal industries, while the highest specific electrical energy consumption was found in the fabricated metal industries followed by rubber producing industries. The specific energy and electricity consumptions found in the present study are compared with Indonesian industrial sectors and presented in thin paper. The study also found that the 64% electrical energy was consumed in peak hours by the industries and average power factor ranged from 0.88 to 0.91. The energy audit in this study can be important tools and approaches for the policy maker to get insight into the energy and electricity uses pattern of Malaysian industrial sector

Determinants of snakebite mortality in Asia: A systematic review

Purpose: This systemic review summarizes the evidence exploring the determinants of mortality due to snakebite envenomation in Asia. Materials and methods: The database PubMed, Web of Science and Science Direct were searched to identify the relevant literatures concerning mortality due to snakebites mortality in Asia. All the articles chosen were critically appraised for its quality using a mixed-method assessment tool by two independent reviewers with discrepancies sorted by a third person. Results: A total of 7 studies were included in the final analysis which was 3 cross-sectional studies, 2 case reports, 1 observation prospective study and 1 randomized control trial study. Two studies were conducted in India and two studies in Sri Lanka while one study was conducted in Taiwan, Vietnam and Nepal respectively. The cases of snakebite victims were retrieved from the year of 1987 until 2017. In total, there were 762 cases of snakebite victims recorded, with 61 of those victims succumbed to death. From the final total of 7 studies, 4 of the studies showed snakebites mortality were related to delayed treatment access and 3 studies due to suboptimal care. Conclusion: Mortality and morbidity can be reduced if there is a quick access for victims to emergency medical care, rapid transfer time to hospital and receiving immediate optimal medical treatment from trained medical staff once in the hospital or dispensary. © 202