82 research outputs found

    Bone mass and microarchitecture of irradiated and bone marrow-transplanted mice: influences of the donor strain

    Get PDF
    Summary Total body irradiation and bone marrow transplantation induced dramatic trabecular bone loss and cortical thickening in mice. Transplanted cells were engrafted in bone marrow, along trabeculae, and in periosteal and endosteal envelopes. None of the osteocytes were of donor origin. Bone microarchitecture of transplanted mice changed to tend toward the donor phenotype. Introduction Osteopenia and osteoporosis are complications of bone marrow transplants (BMT) attributed to related chemotherapy. However, the specific influence of total body irradiation (TBI) is unknown. Methods We investigated the effects of TBI and BMT on bone mass and microarchitecture by micro-CT. Eighteen C57Bl/6 (B6) mice receiving lethal TBI had a BMT with marrow cells from green fluorescent protein--transgenic-C57Bl/6 (GFP) mice. Transplanted (TGFPB6), B6, and GFP mice were euthanized 1, 3, and 6 months after BMT or at a related age. Results TGFPB6 presented a dramatic bone loss compared with B6 and did not restore their trabecular bone mass over time, despite a cortical thickening 6 months after BMT. Serum testosterone levels were not significantly reduced after BMT. During aging, GFP mice have less trabeculae, thicker cortices, but a narrower femoral shaft than B6 mice. From 3 months after BMT, cortical characteristics of TGFPB6 mice differed statistically from B6 mice and were identical to those of GFP mice. GFP+ cells were located along trabecular surfaces and in periosteal and endosteal envelopes, but none of the osteocytes expressed GFP. Conclusion Our findings suggest that engrafted cells did not restore the irradiation-induced trabecular bone loss, but reconstituted a marrow microenvironment and bone remodeling similar to those of the donor. The effects of irradiation and graft on bone remodeling differed between cortical and trabecular bone

    Water Absorption of Poly(methyl methacrylate) Measured by Vertical Interference Microscopy

    Get PDF
    PMMA (poly(methyl methacrylate)) is widely used to prepare orthopedic cements. They are in direct contact with cells and body fluids. PMMA, despite its hydrophobic nature, can absorb ?2% w/w water. We have evaluated by vertical interference microscopy if water absorption can produce a significant swelling in different types of PMMA blocks: pure, with a plasticizer, with a cross-linker, and in two types of commercial bone cements. Graphite rods which do not swell in water were used as internal standard. Hardness, indentation modulus, plastic, and elastic works were determined by nanoindentation under a 25mN fixed force. Vertical interference microscopy was used to image the polymer in the dry state and hydrated states (after 24 h in distilled water). On the surface of the polished polymers (before and after hydration), we measured roughness by the fractal dimension, the swelling in the vertical and the lateral directions. For each polymer block, four images were obtained and values were averaged. Comparison and standardization of the images in the dry and hydrated states were done with Matlab software. The average value measured on the graphite rod between the two images (dried and hydrated) was used for standardization of the images which were visualized in 3D. After grinding, a small retraction was noticeable between the surface of the rod and the polymers. A retraction ring was also visible around the graphite rod. After hydration, only the pure PMMA and bone cements had a significant swelling in the vertical direction. The presence of polymer beads in the cements limited the swelling in the lateral direction. Swelling parameters correlated with the nanoindentation data. PMMA can swell by absorbing a small amount of water and this induces a swelling that varies with the polymer composition and particle inclusions

    Relationships between bone mass and micro-architecture at the mandible and iliac bone in edentulous subjects: a dual X-ray absorptiometry, computerised tomography and microcomputed tomography study

    Get PDF
    Relationships between bone mass and micro-architecture at the mandible and iliac bone in edentulous subjects: a dual X-ray absorptiometry, computerised tomography and microcomputed tomography study Objectives:  To compare bone volume, bone mineral density, cortical thickness and bone micro-architecture in a series of paired mandibular and iliac bone samples analysed by various imagery techniques to see whether relationships exist between the various techniques and between mandibular and iliac bone. Materials and methods:  Bone samples from the mandible and ilium were harvested in 20 cadavers and analysed by dual energy X-ray absorptiometry (DXA), computerised tomography (CT) on a conventional hospital machine and microCT. Results:  Significant correlations were found between Hounsfield density obtained by CT, and bone mass determined by microCT but not with DXA values. Cortical thickness measurements were well correlated between CT and microCT. No relationships were found between mandibular and iliac bone, when considering mineral density, cortical thickness, bone volume or micro-architecture. Conclusion:  In clinical practice, CT remains the most appropriate routine means for bone qualitative and quantitative evaluation at the mandible. In this ex vivo study, these results confirm that mandibular bone status does not reflect the axial skeletal one and assist in the placement of implants with dental prostheses in old or osteoporotic patients

    The porin and the permeating antibiotic: A selective diffusion barrier in gram-negative bacteria

    Get PDF
    Gram-negative bacteria are responsible for a large proportion of antibiotic resistant bacterial diseases. These bacteria have a complex cell envelope that comprises an outer membrane and an inner membrane that delimit the periplasm. The outer membrane contains various protein channels, called porins, which are involved in the influx of various compounds, including several classes of antibiotics. Bacterial adaptation to reduce influx through porins is an increasing problem worldwide that contributes, together with efflux systems, to the emergence and dissemination of antibiotic resistance. An exciting challenge is to decipher the genetic and molecular basis of membrane impermeability as a bacterial resistance mechanism. This Review outlines the bacterial response towards antibiotic stress on altered membrane permeability and discusses recent advances in molecular approaches that are improving our knowledge of the physico-chemical parameters that govern the translocation of antibiotics through porin channel

    Interactions between microenvironment and cancer cells in two animal models of bone metastasis

    Get PDF
    The preferential proliferation of cancer cells in the bone microenvironment is poorly characterised. Expression pattern of bone marrow and other organ microenvironment in contact with osteolytic (Walker W256) and osteoblastic (MatLyLu MLL) metastases were investigated. Fisher and Copenhagen rats received, respectively, W256 and MLL cells injection. Bone and soft tissues were analysed by immunochemistry for DKK1, cathepsin K, RANKL, MCSF or IL6 expression. Tartrate-resistant acid phosphatase (TRAcP)-positive cells were detected by a histoenzymatic technique. In bone, expressions of MCSF and DKK1 were shown in stromal cells of the bone marrow, in contact with metastatic foci of both tumours. Many stromal cells were found RANKL positive in the vicinity of the tumours. Cells expressing cathepsin K and multinucleated TRAcP+ cells were found in direct contact with trabeculae but also in bone marrow spaces near metastatic cells. In extraosseous tumours, cells in contact with malignant cells did not expressed DKK1, MCSF, cathepsin K and IL6. Some RANKL+ cells were found in the periphery of subcutaneous tumours but may represent Langerhans cells. Abnormal presence of TRAcP+ cells was never observed in the vicinity of malignant cells. Interaction between stromal and cancer cells induces the expression on the formers of characteristics leading to osteoclastogenesis only in the bone microenvironment

    How β-Lactam Antibiotics Enter Bacteria: A Dialogue with the Porins

    Get PDF
    BACKGROUND:Multi-drug resistant (MDR) infections have become a major concern in hospitals worldwide. This study investigates membrane translocation, which is the first step required for drug action on internal bacterial targets. beta-lactams, a major antibiotic class, use porins to pass through the outer membrane barrier of Gram-negative bacteria. Clinical reports have linked the MDR phenotype to altered membrane permeability including porin modification and efflux pump expression. METHODOLOGY/PRINCIPAL FINDINGS: Here influx of beta-lactams through the major Enterobacter aerogenes porin Omp36 is characterized. Conductance measurements through a single Omp36 trimer reconstituted into a planar lipid bilayer allowed us to count the passage of single beta-lactam molecules. Statistical analysis of each transport event yielded the kinetic parameters of antibiotic travel through Omp36 and distinguishable translocation properties of beta-lactams were quantified for ertapenem and cefepime. Expression of Omp36 in an otherwise porin-null bacterial strain is shown to confer increases in the killing rate of these antibiotics and in the corresponding bacterial susceptibility. CONCLUSIONS/SIGNIFICANCE: We propose the idea of a molecular "passport" that allows rapid transport of substrates through porins. Deciphering antibiotic translocation provides new insights for the design of novel drugs that may be highly effective at passing through the porin constriction zone. Such data may hold the key for the next generation of antibiotics capable of rapid intracellular accumulation to circumvent the further development MDR infections

    Three-Dimensional Characterization of the Vascular Bed in Bone Metastasis of the Rat by Microcomputed Tomography (MicroCT)

    Get PDF
    BackgroundAngiogenesis contributes to proliferation and metastatic dissemination of cancer cells. Anatomy of blood vessels in tumors has been characterized with 2D techniques (histology or angiography). They are not fully representative of the trajectories of vessels throughout the tissues and are not adapted to analyze changes occurring inside the bone marrow cavities. Methodology/Principal Findings We have characterized the vasculature of bone metastases in 3D at different times of evolution of the disease. Metastases were induced in the femur of Wistar rats by a local injection of Walker 256/B cells. Microfil®, (a silicone-based polymer) was injected at euthanasia in the aorta 12, 19 and 26 days after injection of tumor cells. Undecalcified bones (containing the radio opaque vascular casts) were analyzed by microCT, and a first 3D model was reconstructed. Bones were then decalcified and reanalyzed by microCT; a second model (comprising only the vessels) was obtained and overimposed on the former, thus providing a clear visualization of vessel trajectories in the invaded metaphysic allowing quantitative evaluation of the vascular volume and vessel diameter. Histological analysis of the marrow was possible on the decalcified specimens. Walker 256/B cells induced a marked osteolysis with cortical perforations. The metaphysis of invaded bones became progressively hypervascular. New vessels replaced the major central medullar artery coming from the diaphyseal shaft. They sprouted from the periosteum and extended into the metastatic area. The newly formed vessels were irregular in diameter, tortuous with a disorganized architecture. A quantitative analysis of vascular volume indicated that neoangiogenesis increased with the development of the tumor with the appearance of vessels with a larger diameter. Conclusion This new method evidenced the tumor angiogenesis in 3D at different development times of the metastasis growth. Bone and the vascular bed can be identified by a double reconstruction and allowed a quantitative evaluation of angiogenesis upon time

    The CCP4 suite : integrative software for macromolecular crystallography

    Get PDF
    The Collaborative Computational Project No. 4 (CCP4) is a UK-led international collective with a mission to develop, test, distribute and promote software for macromolecular crystallography. The CCP4 suite is a multiplatform collection of programs brought together by familiar execution routines, a set of common libraries and graphical interfaces. The CCP4 suite has experienced several considerable changes since its last reference article, involving new infrastructure, original programs and graphical interfaces. This article, which is intended as a general literature citation for the use of the CCP4 software suite in structure determination, will guide the reader through such transformations, offering a general overview of the new features and outlining future developments. As such, it aims to highlight the individual programs that comprise the suite and to provide the latest references to them for perusal by crystallographers around the world
    corecore