205 research outputs found
Solidification characteristics of atomized AlCu4Mg1-SiC composite powders
In this study, rapidly solidified metal matrix composite powders have been produced by PREP (Plasma rotating electrode process) atomization. AlCu4Mg1 alloy is used as the matrix material while SiC particles, with about 650 nm average particle size, are used as the reinforcement phase. The microstructural and solidification characteristics of composite particles are studied using optical and scanning electron microscope (SEM). The relationship between secondary dendrite arm spacing (SDAS) and particle diameter was examined, and these composite powders were found to have dendritic and equiaxed solidification with a fine eutectic phase. SDAS measurements using various sized particles show that secondary dendrite arm spacing slightly decreases with the decrease in particle size
Investigations on nucleophilic layers made with a novel plasma jet technique
In this work a novel plasma jet technique is used for the deposition of nucleophilic films based on (3-aminopropyl)trimethoxysilane at atmospheric pressure. Film deposition was varied with regard to duty cycles and working distance. Spectral ellipsometry and chemical derivatization with 4-(trifluoromethyl)benzaldehyde using ATR- FTIR spectroscopy measurements were used to characterize the films. It was found that the layer thickness and the film composition are mainly influenced by the duty cycle
Study of FSRU-LNGC System Based on a Quantitative Multi-cluster Risk Informed Model
PresentationThe offshore LNG terminal, referred to as LNG floating storage unit or floating storage and re- gasification unit (FSRU), performs well on both building process and operation process. The LNG FSRU is a cost-effective and time efficient solution for LNG transferring in the offshore area, and it brings minimal impacts to the surrounding environment as well. This paper proposed a systematic method to integrate chemical process safety with maritime safety analysis. The evaluation network was adopted to process a comparison study between two possible locations for LNG offshore FSRU. This research divided the whole process into three parts, beginning with the LNG Carrier navigating in the inbound channel, the berthing operation and ending with the completion of LNG transferring operation. The preferred location is determined by simultaneously evaluating navigation safety, berthing safety and LNG transferring safety objectives based on the quantitative multi-cluster network multi-attribute decision analysis (QMNMDA) method. The maritime safety analysis, including navigational process and berthing process, was simulated by LNG ship simulator and analyzed by statistical tools; evaluation scale for maritime safety analysis were determined by analyzing data from ninety experts. The chemical process safety simulation was employed to LNG transferring events such as connection hose rupture, flange failure by the consequence simulation tool. Two scenarios, i.e., worst case scenario and maximum credible scenario, were taken into consideration by inputting different data of evaluating parameters. The QMNMDA method transformed the evaluation criteria to one comparable unit, safety utility value, to evaluate the different alternatives. Based on the final value of the simulation, the preferred location can be determined, and the mitigation measures were presented accordingly
Determination of cadmium accumulation capabilities of aquatic macrophytes Ceratophyllum demersum, Bacopa monnieri and Rotala rotundifolia
In the present study, cadmium (Cd) accumulation capabilities of aquatic macrophytes Ceratophyllum demersum, Bacopa monnieri and Rotala rotundifolia were determined after treating both individual and triple macrophytes. The macrophytes were treated with Cd at 0, 0.1, 1 and 10 mg/L concentrations in a controlled chamber for 12-days. Cadmium accumulations increased with increasing Cd concentrations in all macrophytes. Bioconcentration factor (BCF), which indicates the efficiency of the macrophyte to accumulate Cd, decreased with increased external Cd concentrations. When compared to single macrophyte applications, reductions were observed in Cd accumulation of the combined macrophyte treatments. The maximum Cd accumulation was recorded in R. rotundifolia followed by C. demersum and B. monnieri in both single and combined macrophyte applications. Consequently, the macrophytes in both applications proved highly effective in the accumulation of Cd. Thus, they may be used especially in the abatement and monitoring of Cd pollution
On the stationarity of linearly forced turbulence in finite domains
A simple scheme of forcing turbulence away from decay was introduced by
Lundgren some time ago, the `linear forcing', which amounts to a force term
linear in the velocity field with a constant coefficient. The evolution of
linearly forced turbulence towards a stationary final state, as indicated by
direct numerical simulations (DNS), is examined from a theoretical point of
view based on symmetry arguments. In order to follow closely the DNS the flow
is assumed to live in a cubic domain with periodic boundary conditions. The
simplicity of the linear forcing scheme allows one to re-write the problem as
one of decaying turbulence with a decreasing viscosity. Scaling symmetry
considerations suggest that the system evolves to a stationary state, evolution
that may be understood as the gradual breaking of a larger approximate symmetry
to a smaller exact symmetry. The same arguments show that the finiteness of the
domain is intimately related to the evolution of the system to a stationary
state at late times, as well as the consistency of this state with a high
degree of isotropy imposed by the symmetries of the domain itself. The
fluctuations observed in the DNS for all quantities in the stationary state can
be associated with deviations from isotropy. Indeed, self-preserving isotropic
turbulence models are used to study evolution from a direct dynamical point of
view, emphasizing the naturalness of the Taylor microscale as a self-similarity
scale in this system. In this context the stationary state emerges as a stable
fixed point. Self-preservation seems to be the reason behind a noted similarity
of the third order structure function between the linearly forced and freely
decaying turbulence, where again the finiteness of the domain plays an
significant role.Comment: 15 pages, 7 figures, changes in the discussion at the end of section
VI, formula (60) correcte
Planform selection in two-layer Benard-Marangoni convection
Benard-Marangoni convection in a system of two superimposed liquids is
investigated theoretically. Extending previous studies the complete
hydrodynamics of both layers is treated and buoyancy is consistently taken into
account. The planform selection problem between rolls, squares and hexagons is
investigated by explicitly calculating the coefficients of an appropriate
amplitude equation from the parameters of the fluids. The results are compared
with recent experiments on two-layer systems in which squares at onset have
been reported.Comment: 17 pages, 7 figures, oscillatory instability included, typos
corrected, references adde
Stable ℋ∞controller design for systems with time delays
One of the difficult problems of robust control theory is to find strongly stabilizing controllers (i.e. stable controllers leading to stable feedback system) which satisfy a certain ℋ∞ performance objective. In this work we discuss stable ℋ∞controller design methods for various classes of systems with time delays. We consider sensitivity minimization problem in this setting for SISO plants. We also discuss a suboptimal design method for stable ℋ∞controllers for MIMO plants. © 2010 Springer-Verlag Berlin Heidelberg
FIREBall-2: flight preparation of a proven balloon payload to image the intermediate redshift circumgalactic medium
FIREBall-2 is a stratospheric balloon-borne 1-m telescope coupled to a UV
multi-object slit spectrograph designed to map the faint UV emission
surrounding z~0.7 galaxies and quasars through their Lyman-alpha line emission.
This spectro-imager had its first launch on September 22nd 2018 out of Ft.
Sumner, NM, USA. Because the balloon was punctured, the flight was abruptly
interrupted. Instead of the nominal 8 hours above 32 km altitude, the
instrument could only perform science acquisition for 45 minutes at this
altitude. In addition, the shape of the deflated balloon, combined with a full
Moon, revealed a severe off-axis scattered light path, directly into the UV
science detector and about 100 times larger than expected. In preparation for
the next flight, and in addition to describing FIREBall-2's upgrade, this paper
discusses the exposure time calculator (ETC) that has been designed to analyze
the instrument's optimal performance (explore the instrument's limitations and
subtle trade-offs)
Thermo-Mechanical Treatment Effects on Stress Relaxation and Hydrogen Embrittlement of Cold-Drawn Eutectoid Steels
The effects of the temperature and stretching levels used in the stress-relieving treatment of cold-drawn eutectoid steel wires are evaluated with the aim of improving the stress relaxation behavior and the resistance to hydrogen embrittlement. Five industrial treatments are studied, combining three temperatures (330, 400, and 460 °C) and three stretching levels (38, 50 and 64% of the rupture load). The change of the residual stress produced by the treatments is taken into consideration to account for the results. Surface residual stresses allow us to explain the time to failure in standard hydrogen embrittlement test
- …