Technique for validating remote sensing products of water quality

Remote sensing of water quality is initiated as an additional part of the on going activities of the EAGLE2006 project. Within this context intensive in-situ and airborne measurements campaigns were carried out over the Wolderwijd and Veluwemeer natural waters. However, in-situ measurements and image acquisitions were not simultaneous. This poses some constraints on validating air/space-borne remote sensing products of water quality. Nevertheless, the detailed insitu measurements and hydro-optical model simulations provide a bench mark for validating remote sensing products. That is realized through developing a stochastic technique to quantify the uncertainties on the retrieved aquatic inherent optical properties (IOP). The output of the proposed technique is applied to validate remote sensing products of water quality. In this processing phase, simulations of the radiative transfer in the coupled atmosphere-water system are performed to generate spectra at-sensor-level. The upper and the lower boundaries of perturbations, around each recorded spectrum, are then modelled as function of residuals between simulated and measured spectra. The perturbations are parameterized as a function of model approximations/inversion, sensor-noise and atmospheric residual signal. All error sources are treated as being of stochastic nature. Three scenarios are considered: spectrally correlated (i.e. wavelength dependent) perturbations, spectrally uncorrelated perturbations and a mixed scenario of the previous two with equal probability of occurrence. Uncertainties on the retrieved IOP are quantified with the relative contribution of each perturbation component to the total error budget of the IOP. This technique can be used to validate earth observation products of water quality in remote areas where few or no in– situ measurements are available

Influence of analysis and design models on minimum weight design

The results of numerical experiments designed to illustrate how the minimum weight design, accuracy, and cost can be influenced by: (1) refinement of the finite element analysis model and associated load path problems, and (2) refinement of the design variable linking model are examined. The numerical experiments range from simple structures where the modelling decisions are relatively obvious and less costly to the more complex structures where such decisions are less obvious and more costly. All numerical experiments used employ the dual formulation in ACCESS-3 computer program. Guidelines are suggested for creating analysis and design models that predict a minimum weight structure with greater accuracy and less cost. These guidelines can be useful in an interactive optimization environment and in the design of heuristic rules for the development of knowledge-based expert optimization systems

The Relationship between Performance Standards and Achieving the Objectives of Supervision at the Islamic University in Gaza

The aim of the research is to identify the relationship between the performance criteria and the achievement of the objectives of supervision which is represented in the performance of the job at the Islamic University in Gaza Strip. To achieve the objectives of the research, the researchers used the descriptive analytical approach to collect information. The questionnaire consisted of (22) paragraphs distributed to three categories of employees of the Islamic University (senior management, faculty members, their assistants and members of the administrative board). A random sample of 314 employees was selected, 276 responses were retrieved with a return rate of 88.1%. The SPSS program was used to enter, process, and analyze the data. The results of the study showed a positive relationship between the performance criteria and the achievement of the control objectives represented by the job performance in the Islamic University from the point of view of the members (senior management, faculty and their assistants and the administrative board). The researchers also recommended a number of recommendations, including the provision of an appropriate level of control system components today through the continuous updating and development of performance standards and the need to provide the necessary physical and financial resources to continue the development and achievement within the university. Expand the development of technology in the various activities of the university through the construction of a complete and integrated system to support the control systems in the university to suit its size. The researchers also recommended the follow-up, review of the performance standards and work to modify them in line with the mission of the university and the goals that the university seeks to reach

"Magnetoscan": A Modified Hall Probe Scanning Technique for the Detection of Inhomogeneities in Bulk High Temperature Superconductors

We present a novel technique for the investigation of local variations of the critical current density in large bulk superconductors. In contrast to the usual Hall probe scanning technique, the sample is not magnetized as a whole before the scan, but locally by a small permanent magnet, which is fixed near the Hall probe, during the scanning process. The resulting signal can be interpreted as a qualitative measure of the local shielding currents flowing at the surface.Comment: 8 pages, 4 figure

The Role of Measuring and Evaluating Performance in Achieving Control Objectives- Case Study of "Islamic University"

The study aimed to identify the role of measuring and evaluating performance in achieving the objectives of control and the performance of the job at the Islamic University in Gaza Strip. To achieve the objectives of the research, the researchers used the descriptive analytical approach to collect information which is the questionnaire that consisted of (22) phrases were distributed to three categories of employees of the Islamic University (Faculty Members and Their Assistants, Members of the Administrative Board, Senior Management). A random sample of (314) employees was selected and 276 responses were retrieved with a recovery rate of 88.1%. The Statistical Analysis Program (SPSS) was used to enter process and analyze the data. The results of the research showed a positive role between measuring and evaluating the performance and achieving the objectives of the control of performance in the Islamic University from the point of view of the members (senior management, faculty and their assistants, and members of administrative board). The researchers also recommended a number of recommendations, most notably the provision of an appropriate level of the elements of the control systems today through the modernization and continuous development of performance measures and the need to provide the physical and financial resources necessary to continue the development and achievement within the university, to expand the development of technology in the various activities of the university through the construction of a complete and integrated system to support supervision systems in the university to suit the size of the university. The researchers also recommended following up and reviewing the performance measures and work to modify them in line with the mission and the goals of the university that it seeks to reach

The Relationship between Correcting Deviations in Measuring Performance and Achieving the Objectives of Control - The Islamic University as a Model

The study aimed to identify the relationship between correcting the deviations in the measurement of performance and achieving the objectives of control and the performance of the job at the Islamic University in the Gaza Strip. To achieve the objectives of the research, the researchers used the descriptive analytical approach to collect information. The questionnaire consisted of (20) statements distributed to three categories of employees of the Islamic University (senior management, faculty members, their assistants and members of the administrative board). A random sample of 314 employees was selected and 276 responses were retrieved with a recovery rate of 88.1%. The Statistical Analysis Program (SPSS) was used to enter, process, and analyze the data. The results of the study showed a positive relationship between correcting deviations in performance measurement and achieving the control objectives represented by the functional performance in the Islamic University from the point of view of the members (senior management, faculty and their assistants, and the administrative board), where the relative weight of all the paragraphs was (74.25%). The study recommended the need to ensure that the actual performance of the planned performance is matched and decisions are taken to correct the serious deviations and take the necessary measures in terms of retraining and change in regulations, wages and bonuses and punishment of the culprit, neglect and negligence by mistake

Semi-Compact and Semi-Lindelӧf Spaces via Neutrosophic Crisp Set Theory

The aim of this paper is devoted to introduce and study the concepts of semi-compact (resp. semi-Lindelӧf, locally semi-compact) spaces in a neutrosophic crisp topological space. Several properties, functions properties of neutrosophic crisp semi-compact spaces are studied. In addition to these, we introduce and study the definition of neutrosophic crisp semi-Lindelӧf spaces and neutrosophic crisp locally semi-compact spaces. We show that neutrosophic crisp semi-compact spaces is preserved under neutrosophic crisp irresolute function and neutrosophic crisp pre-semi-closed function with neutrosophic crisp semi-compact point inverses

Direct observation of substitutional Ga after ion implantation in Ge by means of extended x-ray absorption fine structure

We present an experimental lattice location study of Ga atoms in Ge after ion implantation at elevated temperature (250°C). Using extended x-rayabsorption fine structure (EXAFS) experiments and a dedicated sample preparation method, we have studied the lattice location of Ga atoms in Ge with a concentration ranging from 0.5 at. % down to 0.005 at. %. At Ga concentrations ≤0.05 at.%, all Ga dopants are substitutional directly after ion implantation, without the need for post-implantation thermal annealing. At higher Ga concentrations, a reduction in the EXAFS amplitude is observed, indicating that a fraction of the Ga atoms is located in a defective environment. The local strain induced by the Ga atoms in the Ge matrix is independent of the Ga concentration and extends only to the first nearest neighbor Ge shell, where a 1% contraction in bond length has been measured, in agreement with density functional theory calculations.We acknowledge the support from the Research Foundation Flanders, the epi-team from imec, the KU Leuven GOA 09/06 project, the IUAP program P6/42 and the Australian Research Council. S.C. acknowledges support from OCAS NV by an OCAS-endowed chair at Ghent University