Sol-gel synthesis of spherical monodispersed bioactive glass nanoparticles co-doped with boron and copper

In this work, an optimized sol-gel process for the synthesis of spherical and monodispersed bioactive glass nanoparticles doped with boron and copper was developed, by investigating different synthesis parameters. The obtained glasses were characterized in terms of morphology, composition, dispersibility, structure and in vitro reactivity. The performed characterizations demonstrated that shape, dimension and dispersion can be tailored by acting on the timing of the addition of the catalyst and on the synthesis process, in particular the centrifugation step. The optimized glass particles showed a spherical shape, good ions incorporation and good dispersion. In vitro bioactivity test demonstrated that the boron and copper addition did not interfere with the glass ability to induce the precipitation of hydroxyapatite. The shape, dispersion, bioactive behavior and content of boron and copper of these novel bioactive glass particles make them very promising for both hard and soft tissue engineering applications

Sol-gel synthesis of spherical monodispersed bioactive glass nanoparticles co-doped with boron and copper

In this work, an optimized sol-gel process for the synthesis of spherical and monodispersed bioactive glass nanoparticles doped with boron and copper was developed, by investigating different synthesis parameters. The obtained glasses were characterized in terms of morphology, composition, dispersibility, structure and in vitro reactivity. The performed characterizations demonstrated that shape, dimension and dispersion can be tailored by acting on the timing of the addition of the catalyst and on the synthesis process, in particular the centrifugation step. The optimized glass particles showed a spherical shape, good ions incorporation and good dispersion. In vitro bioactivity test demonstrated that the boron and copper addition did not interfere with the glass ability to induce the precipitation of hydroxyapatite. The shape, dispersion, bioactive behavior and content of boron and copper of these novel bioactive glass particles make them very promising for both hard and soft tissue engineering applications

Investigating the different domains of environmental knowledge acquired from virtual navigation and their relationship to cognitive factors and wayfinding inclinations

When learning an environment from virtual navigation people gain knowledge about landmarks, their locations, and the paths that connect them. The present study newly aimed to investigate all these domains of knowledge and how cognitive factors such as visuospatial abilities and wayfinding inclinations might support virtual passive navigation. A total of 270 participants (145 women) were tested online. They: (i) completed visuospatial tasks and answered questionnaires on their wayfinding inclinations; and (ii) learnt a virtual path. The environmental knowledge they gained was assessed on their free recall of landmarks, their egocentric and allocentric pointing accuracy (location knowledge), and their performance in route direction and landmark location tasks (path knowledge). Visuospatial abilities and wayfinding inclinations emerged as two separate factors, and environmental knowledge as a single factor. The SEM model showed that both visuospatial abilities and wayfinding inclinations support the environmental knowledge factor, with similar pattern of relationships in men and women. Overall, factors related to the individual are relevant to the environmental knowledge gained from an online virtual passive navigation

PMMA-based bone cements and the problem of joint arthroplasty infections: Status and new perspectives

Polymethyl methacrylate (PMMA)-based bone cement is a biomaterial that has been used over the last 50 years to stabilize hip and knee implants or as a bone filler. Although PMMA-based bone cement is widely used and allows a fast-primary fixation to the bone, it does not guarantee a mechanically and biologically stable interface with bone, and most of all it is prone to bacteria adhesion and infection development. In the 1970s, antibiotic-loaded bone cements were introduced to reduce the infection rate in arthroplasty; however, the eciency of antibiotic-containing bone cement is still a debated issue. For these reasons, in recent years, the scientific community has investigated new approaches to impart antibacterial properties to PMMA bone cement. The aim of this review is to summarize the current status regarding antibiotic-loaded PMMA-based bone cements, fill the gap regarding the lack of data on antibacterial bone cement, and explore the progress of antibacterial bone cement formulations, focusing attention on the new perspectives. In particular, this review highlights the innovative study of composite bone cements containing inorganic antibacterial and bioactive phases, which are a fascinating alternative that can impart both osteointegration and antibacterial properties to PMMA-based bone cement

Synthesis and characterization of magnetic and antibacterial nanoparticles as filler in acrylic cements for bone cancer and comorbidities therapy

In this work an innovative formulation of bone cement for the treatment of bone tumor and its associated complications has been designed by preparing a new class of Fe3O4–Ag nanostructures, using gallic acid as a reducing agent. The obtained nanoparticles have been introduced in polymethyl methacrylate (PMMA)-based composite cement evaluating the insertion of different amounts and the use of different mixing methods. The morphology, the composition and the antibacterial effect of Fe3O4–Ag nanostructures have been investigated together with the morphology, the composition, the mechanical properties of the nanoparticles-containing composite cements as well as their antibacterial effect. The obtained results revealed a good antimicrobial effect of Fe3O4–Ag nanostructures, a significant influence of their amount and of the used mixing method on the particles dispersion and agglomeration in the PMMA matrix and, as a result, on the mechanical properties. In particular, a better dispersion of nanoparticles was obtained by using the mechanical mixing, reducing the tendency to agglomerate. The increase of nanoparticles amount induced a slight decrease of the mechanical properties; however, the introduction of 10% w/w of Fe3O4–Ag allowed to improve the composites ability to reduce the bacteria adhesion

INFLUÊNCIA DO DIÂMETRO DE ESTACAS NO DESENVOLVIMENTO DOS BROTOS DE Platanus x acerifolia

O objetivo do presente trabalho foi determinar o diâmetro ideal de estacas para a produção de mudas de Platanus x acerifolia. As estacas utilizadas foram coletadas em árvores cuja a brotação apresentava-se com um ano de idade. Foram comparados três diâmetros de estacas: diâmetros inferiores a 1 cm, diâmetros entre 1 e 2 cm e diâmetros superiores a 2 cm. Todas as estacas possuiam 30 cm de comprimento. Decorridos 90 dias do plantio das estacas, foram medidas as alturas dos brotos, onde na qual o maior desenvolvimento foi observado nas estacas com diâmetro entre 1 e 2 centímetros

Magneto-plasmonic heterodimers: Evaluation of different synthesis approaches

Nanomedicine has gained huge attention in recent years with new approaches in medical diagnosis and therapy. Particular consideration has been devoted to the nanoparticles (NPs) in theranostic field with specific interest for magnetic and gold NPs (MNPs and GNPs) due to their peculiar properties under exposition to electromagnetic fields. In this paper, we aim to develop magneto-plasmonic heterodimer by combining MNPs and GNPs through a facile and reproducible synthesis and to investigate the influence of different synthesis parameters on their response to magnetic and optical stimuli. In particular, various syntheses were performed by changing the functionalization step and using or not a reducing agent to obtain stable NP suspensions with tailored properties. The obtained heterodimers were characterized through physical, chemical, optical, and magnetic analysis, in order to evaluate their size, shape, plasmonic properties, and superparamagnetic behavior. The results revealed that the shape and dimensions of the nanocomposites can be tuned by MNPs surface functionalization, as well as by the use of a reducing agent, giving rise to nanoplatform suitable for biomedical application, exploiting the gold absorbing peak in the specific gold absorbing range of GNPs, while maintaining the superparamagnetic behavior typical of the MNPs. The obtained nanocomposites can be proposed as potential candidates for cancer theranostics

Bioactive materials: In vitro investigation of different mechanisms of hydroxyapatite precipitation

Abstract Bioactive materials, able to induce hydroxyapatite precipitation in contact with body fluids, are of great interest for their bone bonding capacity. . The aim of this paper is to compare bioactive materials with different surface features to verify the mechanisms of action and the relationship with kinetics and type of precipitated hydroxyapatite over time. Four different surface treatments for Ti/Ti6Al4V alloy and a bioactive glass were selected and a different mechanism of bioactivity is supposed for each of them. Apart from the conventional techniques (FESEM, XPS and EDX), less common characterizations (zeta potential measurements on solid surfaces and FTIR chemical imaging) were applied. The results suggest that the OH groups on the surface have several effects: the total number of the OH groups mainly affects hydrophilicity of surfaces, while the isoelectric points, surface charge and ions attraction mainly depend on OH acidic/basic strength. Kinetics of hydroxyapatite precipitation is faster when it involves a mechanism of ion exchange while it is slower when it is due to electrostatic effects . The electrostatic effect cooperates with ion exchange and it speeds up kinetics of hydroxyapatite precipitation. Different bioactive surfaces are able to differently induce precipitation of type A and B of hydroxyapatite, as well as different degrees of crystallinity and carbonation. Statement of significance The bone is made of a ceramic phase (a specific type of hydroxyapatite), a network of collagen fibers and the biological tissue. A strong bond of an orthopedic or dental implant with the bone is achieved by bioactive materials where precipitation and growth of hydroxyapatite occurs on the implant surface starting from the ions in the physiological fluids. Several bioactive materials are already known and used, but their mechanism of action is not completely known and the type of precipitated hydroxyapatite not fully investigated. In this work, bioactive titanium and bioglass surfaces are compared through conventional and innovative methodologies. Different mechanisms of bioactivity are identified, with different kinetics and the materials are able to induce precipitation of different types of hydroxyapatite, with different degree of crystallinity and carbonation