Solving thermal issues in tensile-strained Ge microdisks

International audienceWe propose to use a Ge-dielectric-metal stacking to allow one to address both thermal management with the metal as an efficient heat sink and tensile strain engineering with the buried dielectric as a stressor layer. This scheme is particularly useful for the development of Ge-based optical sources. We demonstrate experimentally the relevance of this approach by comparing the optical response of tensile-strained Ge microdisks with an Al heat sink or an oxide pedestal. Photoluminescence indicates a much reduced temperature rise in the microdisk (16 K with Al pedestal against 200 K with SiO 2 pedestal under a 9 mW continuous wave optical pumping). An excellent agreement is found with finite element modeling of the temperature rise. This original stacking combining metal and dielectrics is promising for integrated photonics where thermal management is an issue

Enhanced light emission from improved homogeneity in biaxially suspended Germanium membranes from curvature optimization

A silicon compatible light source is crucial to develop a fully monolithic silicon photonics platform. Strain engineering in suspended Germanium membranes has offered a potential route for such a light source. However, biaxial structures have suffered from poor optical properties due to unfavorable strain distributions. Using a novel geometric approach and finite element modelling (FEM) structures with improved strain homogeneity were designed and fabricated. Micro-Raman (μ-Raman) spectroscopy was used to determine central strain values. Micro-photoluminescence (μ-PL) was used to study the effects of the strain profiles on light emission; we report a PL enhancement of up to 3x by optimizing curvature at a strain value of 0.5% biaxial strain. This geometric approach offers opportunity for enhancing the light emission in Germanium towards developing a practical on chip light source

Adopting smart supply chain and smart technologies to improve operational performance in manufacturing industry

The manufacturing industry plays a crucial role in the economy of many countries, but there is a lack of expertise in implementing smart supply chains and smart technologies. This study aims to investigate the relationship between smart supply chains, smart technologies, and operational performance in the manufacturing industry. A survey questionnaire was conducted among registered manufacturing industries, and the results were analyzed using Smart PLS to test 10 hypotheses. Four hypotheses were supported out of 119 responses received through simple random sampling. The study suggests implementing instrumented supply chains using smart technologies can enhance operational performance. The findings provide valuable insights for policymakers, academics, and industry practitioners to improve the competitiveness of the manufacturing industry. This research emphasizes the importance of smart supply chains and smart technologies in achieving operational excellence, and further studies are necessary to address the identified limitations and contribute to a deeper understanding of the role of smart technologies in the supply chain’s digitalization

Ultra-Low Threshold cw Lasing in Tensile Strained GeSn Microdisk Cavities

GeSn is proven as a good candidate to achieve CMOS-compatible laser sources on silicon. Lasing demonstrations in this alloy were based on directness of the band structure, this directness being increased with increasing the Sn content above 8 at.%. These past few years the research were consequently focused on incorporating the highest Sn content as possible to achieve high directness and high temperature laser operation. This unfortunately results is increased threshold. In this contribution we discuss the advantages in combining tensile strain engineering with lower Sn content alloys. This approach is motivated by the higher material quality in lower Sn content. The case with Sn content as small as 5.4 at.% Sn will be discussed. The alloy is initially compressively strained, and exhibits an indirect band gap that is turned to direct by applying tensile strain. A specific technology based on transfer On Insulator stressor layer on metal was developed to address strain engineering, thermal cooling and defective interface with the Ge-VS. This led to lasing in Ge0.95Sn0.05 microdisk cavities with dramatically reduced thresholds, by two order of magnitude, as compared to the case with high Sn alloys and as consequence enables cw operation

Development and validation of a tool to improve community pharmacists' surveillance role in the safe dispensing of herbal supplements

Background: There has been an appreciable increase in the use of herbal supplements, including immune boosters, during the current COVID-19 pandemic. However, there are concerns with falsified herbal supplements Objectives Developed a new questionnaire that can potentially help community pharmacists with identifying the extent of falsified herbal supplements. Methods: A cross sectional study conducted over nine months among 500 community pharmacies in the UAE. Face-to-face interviews were undertaken using a structured questionnaire, which was subjected to face and content validity, with the content validity index (CVI) computed. Construct validity was tested using an exploratory factor analysis (EFA) via principally component analysis (PCA). The model was then confirmed through Partial confirmatory factor analysis (PCFA). Reliability was assessed via test-retest reliability, internal consistency, item internal consistency (IIC), and intraclass correlation coefficients (ICCs). Results: An instrument compromised of five domains with a 24-item scale was developed with CVI of 0.843. The KMO measure of sampling adequacy was 0.891, and Bartlett’s test of sphericity indicated significance (p-value < 0.001). Confirmation of the subsequent 5-domains was achieved through PCFA using MLA with oblimin rotation. The PCFA obtained values of 0.962 for NFI, 0.977 for CFI, and 0.987 for TLI; all values were greater than 0.95, and the RMSEA value was 0.03 (i.e., less than 0.06). Consequently, the model had a good fit. All domains demonstrated Cronbach’s alpha coefficients above 0.70, with 0.940 for the full instrument. Meanwhile, all items met the IIC correlation standard of ≥ 0.40. The instrument presented good ICC statistics of 0.940 (0.928 – 0.950) as well as statistical significance (p < 0.001). Those participants who had more than 10 experience years more likely to identify falsified herbal supplements compared to those who have 1 to 10 experience years (p < 0.001). Conclusions: This study developed and validated a new instrument to identify safe herbal supplements products, which will help enhance the role of the community pharmacists in safe and effective treatment of suitable patients with herbal supplements

Impact of tensile strain on low Sn content GeSn lasing

In recent years much effort has been made to increase the Sn content in GeSn alloys in order to increase direct bandgap charge carrier recombination and, therefore, to reach room temperature lasing. While being successful for the former, the increase of Sn content is detrimental, leading to increased defect concentrations and a lower thermal budget regarding processing. In this work we demonstrate strong photoluminescence enhancement in low Sn content Ge0.94Sn0.06 layers by implementing tensile strain. Fitting of the calculated photoluminescence spectra to reproduce our experimental results indicates a strain of ~1.45%, induced via an SiNx stressor layer, which is strong enough to transform the investigated layer into a direct bandgap semiconductor. Moreover, theoretical calculations, using the 8-band k·p model, show the advantages of using low Sn content tensile strained GeSn layers in respect to gain and lasing temperature. We show that low Sn content GeSn alloys have a strong potential to enable efficient room temperature lasers on electronic-photonic integrated circuits

Viral metagenomics analysis of stool specimens from children with unresolved gastroenteritis in Qatar

Acute gastroenteritis (AGE) is associated with significant global morbidity and mortality, especially among children under five years of age. Viruses are well established as etiologic agents of gastroenteritis since they are the most common pathogens that contribute to the disease burden in developing countries. Despite the advances in molecular diagnosis, a substantial proportion of AGE etiology remain unresolved. We implemented a viral metagenomics pipeline to determine the potential viral etiology associated with AGE among children under the age of five years in Qatar with undiagnosed etiology. Following enriching for the viral genome, ∼1.3 billion sequences were generated from 89 stool specimens using the Illumina HiSeq platform, of which 7% were mapped to viral genomes. Human viruses were detected in 34 specimens (38.2%); 14 were adenovirus, nine coxsackievirus A16, five rotavirus (G9P[8] and G4P[8]), four norovirus (GII), one influenza A virus (H3), and one respiratory syncytial virus A (RSVA). In conclusion, the viral metagenomics approach is useful for determining AGE's etiology when routine molecular diagnostic assays fail.This study was supported by Qatar National Research Fund (QNRF) funding, grant # NPRP 9–133–1-025, and partial funding from Hamad Medical Corporation, grant # 16173/16

Ultra-low-threshold continuous-wave and pulsed lasing in tensile-strained GeSn alloys

Strained GeSn alloys are promising for realizing light emitters based entirely on group IV elements. Here, we report GeSn microdisk lasers encapsulated with a SiNx stressor layer to produce tensile strain. A 300 nm-thick GeSn layer with 5.4 at% Sn, which is an indirect-bandgap semiconductor as-grown, is transformed via tensile strain engineering into a direct-bandgap semiconductor that supports lasing. In this approach, the low Sn concentration enables improved defect engineering and the tensile strain delivers a low density of states at the valence band edge, which is the light hole band. We observe ultra-low-threshold continuous-wave and pulsed lasing at temperatures up to 70 K and 100 K, respectively. Lasers operating at a wavelength of 2.5 μm have thresholds of 0.8 kW cm−2 for nanosecond pulsed optical excitation and 1.1 kW cm−2 under continuous-wave optical excitation. The results offer a path towards monolithically integrated group IV laser sources on a Si photonics platform

Risk factors for pre-term birth in Iraq: a case-control study

BACKGROUND: Preterm birth (PTB)is a major clinical problem associated with perinatal mortality and morbidity. The aim of the present study is to identify risk factors associated with PTB in Mosul, Iraq. METHODS: A case-control study was conducted in Mosul, Iraq, from 1(st )September, 2003 to 28(th )February, 2004. RESULTS: A total of 200 cases of PTB and 200 controls of full-term births were screened and enrolled in the study. Forward logistic regression analysis was used in the analysis. Several significant risk associations between PTB and the following risk factors were identified: poor diet (OR = 4.33), heavy manual work (OR = 1.70), caring for domestic animals (OR = 5.06), urinary tract infection (OR = 2.85), anxiety (OR = 2.16), cervical incompetence (OR = 4.74), multiple pregnancies (OR = 7.51), direct trauma to abdomen (OR = 3.76) and abortion (OR = 6.36). CONCLUSION: The main determinants of PTB in Iraq were low socio-economic status and factors associated with it, such as heavy manual work and caring for domestic animals, in addition to urinary tract infections and poor obstetric history

Molecular characterization of glucose-6-phosphate dehydrogenase deficient variants in Baghdad city - Iraq

Background: Although G6PD deficiency is the most common genetically determined blood disorder among Iraqis, its molecular basis has only recently been studied among the Kurds in North Iraq, while studies focusing on Arabs in other parts of Iraq are still absent. Methods: A total of 1810 apparently healthy adult male blood donors were randomly recruited from the national blood transfusion center in Baghdad. They were classified into G6PD deficient and non-deficient individuals based on the results of methemoglobin reduction test (MHRT), with confirmation of deficiency by subsequent enzyme assays. DNA from deficient individuals was studied using a polymerase chain reaction-Restriction fragment length polymorphism (PCR-RFLP) for four deficient molecular variants, namely G6PD Mediterranean (563 C®T), Chatham (1003 G®A), A- (202 G®A) and Aures (143 T®C). A subset of those with the Mediterranean variant, were further investigated for the 1311 (C®T) silent mutation. Results: G6PD deficiency was detected in 109 of the 1810 screened male individuals (6.0%). Among 101 G6PD deficient males molecularly studied, the Mediterranean mutation was detected in 75 cases (74.3%), G6PD Chatham in 5 cases (5.0%), G6PD A- in two cases (2.0%), and G6PD Aures in none. The 1311 silent mutation was detected in 48 out of the 51 G6PD deficient males with the Mediterranean variant studied (94.1%). Conclusions: Three polymorphic variants namely: the Mediterranean, Chatham and A-, constituted more than 80% of G6PD deficient variants among males in Baghdad. Iraq. This observation is to some extent comparable to othe